Question about 1999 Pontiac Bonneville
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if you look by the crankshaft pulley to the right you will see a tubular looking shaft about 1" diameter , you will notice you can't get the belt out from under this piece , it has a nut on it , once you take the nut off , you will notice it has a star shaped point on the tip of the stud , it requires a reverse torx socket or wrench to remove the stud , when you get the stud out the tube piece it can be removed , then the belt comes off , replace the belt , now comes the tricky part , fitting that tube spacer back into its spot , it can be difficult , once its in place put the stud back in , and put the nut on and tighten it , your pretty much a pro now . thanks.
Posted on Dec 30, 2008
the belt routing should be on the rad housing, under the hood and glued to the fan cover or find it in the owners manual.if this does'nt work then you need to make the grooved pulley's go to the v's and the flat sides go to the flat edges.
Posted on Oct 14, 2009
Tips for a great answer:
Mar 24, 2013 | 1999 Pontiac Bonneville
Jan 18, 2013 | 1999 Pontiac Bonneville
Jan 04, 2012 | 1992 Pontiac Bonneville
Dec 06, 2010 | 1998 Pontiac Bonneville
Jul 12, 2017 | 1999 Pontiac Bonneville
Mar 13, 2010 | 1999 Pontiac Bonneville
Oct 07, 2009 | 1999 Pontiac Bonneville
Sep 02, 2009 | 1999 Pontiac Bonneville
Jan 27, 2009 | 1999 Pontiac Bonneville
206 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: