Question about Honda Civic

1 Answer

What all needs to be removed to replace the head gasket .

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Honda Master
  • 715 Answers

I would like to explain it all , but I don't think there it enough time or space, get a manual, if you have never done a head gasket, don't try with out experianced mechanic, the head will need to be mechined, valve timing is tricky, always replace the water pump and timing belt, the top of the engine has to be disassembled, cleaned, vacumn lines connected properly, fuel lines, electrical connectors, ect. I personaly would get a junk yard motor with a warranty (most offer a 90 day), and drop it in the car, less time and trouble.

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the head gasket on an 86 FORD BRONCO


A torque wrench to tighten the bolts to spec. Necessary tools to remove the head bolts. A gasket scraper for the rocker cover gasket and the head gasket.. If you have a blown head gasket the chances of a warped head is about 98%, so be prepared to have the head machined flat before reinstalling the head. You might want to do a valve job and replace the valve stem seals since you're going to remove the head. If you decide to do a valve job, you MUST do both heads or the engine will never run good.

Aug 12, 2016 | 1986 Ford Bronco II

3 Answers

How do you replace the head gasket


with great difficultry, It is verry time consuming end verry costly to have it (Replaced)

Nov 27, 2012 | 2000 Kia Sportage

1 Answer

How do you disassemble a head gasket for a 2004 toyota camery?


replacing a head gasket is a major repair and really should not be attempted if you dont have adequate knowledge and experince withthe process. That said, the head gasket is sandwiched between the cylinder head and the engine block. It requires removing everything from the top of the motor, then removing the cylinder head itself. The old gasket must be completely scraped off the head and the top of the block and any adhesive removed as well... The new gasket is placed on the top of the block in it correct place. Each side of the gasket must be covered with a thin coat of gasket compound. The place the head on top of the gasket, sandwiching it in between and replace the head bolts and torque them down to the required torque. Replace everything removed from top of motor in reverse order. Keep in mind that in replacing a head gasket, it is entirely possible that your problem may be the head itself instead of the gasket. While the head is off, take it to a machine shop and have them inspect it and if its needs it, have them repair it. Again . this is not a do it yourself job.

Mar 26, 2011 | Toyota Camry Cars & Trucks

2 Answers

Where is the head gasket located at on a 1994 grand marquis


The head gasket (in your case gaskets) is located on the top of the engine block under the engine cylinder head which is under the Camshaft cover which is the very top of the engine. This car is a V8 engine so it has 2 heads and 2 head gaskets, one on each side of the engine. It is a very expensive job to replace head gaskets.

Mar 25, 2011 | Mercury Grand Marquis Cars & Trucks

2 Answers

Would like to know how to determine if I need to replace my cylinder head or if it is the gaskets, I got white smoke coming from exahust and going through antifreeze


Hi, we are never sure if the problem is the gasket or a cracked head until the head is removed and pressure tested for a crack. Oftentimes, we remove the head carefully to preserve the gasket as much as possible so that we can inspect the gasket for leaks. If it is obvious that the gasket was leaking based on visual observation of breaks in the gasket, then we may skip the pressure test and just replace the gasket; however, there is no way of knowing until the head is off the engine.

Feb 10, 2011 | 1992 Ford Explorer

1 Answer

I have a honda civic ex i will like to know how to change the head gasket whether i have to remove the engine from the car


Dear Sir,
For replace head gasket you no need to remove engine you can replace gasket there only but you have to remove cylinder head and do head facing and then put it back with new gasket thanks.
yogesh

Jan 30, 2011 | Honda Civic Cars & Trucks

1 Answer

Leaking head gaskets in cooling system....reservoir is dry...no external leaks visible...


If you have leaking head gaskets in your cooling system you will have to remove the head gasket. You will need to remove the head bolt and remove the old head gaskets. Be sure to note the length of the head bolts in case some are long or short so you can replace them in the correct place. Fit in the new head gasket, replace the bolts, and torque to the factory specifications.

Nov 05, 2010 | 2004 Pontiac Grand Am

2 Answers

Can i just replace the head gaskets or do i need to replace alll gaskets


when u replace the head gaskets u must also replace any parts gasket that u remove (valve covers, intake manifold etc.) to get the heads off, they sell what is called a "Valve Grind" gasket set that is what u need, it will have all the gaskets in it u need..

May 27, 2010 | 1991 Buick Century

1 Answer

Need to remove fuel injectors to replace cracked


Unscrew the lines to the fuel injectors, there is no need to remove fuel injectors to replace a head gasket.

Nov 22, 2009 | 1988 Volkswagen Fox

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...