Question about 1997 Buick LeSabre

1 Answer

A/c comp not kicking in - 1997 Buick LeSabre

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Buick Master
  • 715 Answers

Hook up A/c gauges, see if you have freon in the system, if to low the compressor will not engage (add freon), check power to compressor.

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replace every thing for an ac on a 1998 sts cadi and it still wont cool


There three main parts to the ac system. comp, dyer and lines. when you replaced them you used and made sure the all orings where in? charged and added dye to check for leaks? insure that the comp is kicking on and that the fan is working?
let me know
M.Woodring

Jun 21, 2011 | 1998 Cadillac DeVille

1 Answer

My dash reads refrigeration low/ no ac. My mechanic added 2 pounds of freon and installed a new relay switch. The ac still will not come on and the compressor still will not turn. Please help!


the compressor may be locked up, make sure that you are getting power and ground to the plug on the comp. and if you are not then the problem may be in the high or low preassure switch, if ther is + and grount then try running a jumper wirefrom the comp. to a ground and one from the comp to the pos. side of the batt. and see if the clutch kicks in and out if it does then run the engine and run the same test and you will be able to tell very fast if the comp. locked up. more often then not it will be a preassure switch

May 13, 2011 | 1998 Cadillac DeVille

1 Answer

1986 chevy S10 has no power (12v) at fuse box on the fuse for ac clutch. checked both sides of fuse to ground 00v. ac/heater fuse 12v both sides (fan) works fine


hello, check all fuses, and relays, make sure wires to ac is not broke or has been pinched, sometimes you can run hot wire from battery, to compressor, touch hot side of plug in on comp wire see if it will kick on, if so sounds like a short, if compressor dont kick on with hot wire run to it, tap the out side of comp clutch and see if it kicks on, these compressors will not kick on any way if they are low on freon, once freon is full it should work.

Apr 08, 2010 | 1986 Chevrolet S-10 Blazer

2 Answers

AC COMP TURNS AND OFF


System is probably a little low on refrigerant. Once it kicks on, it drops the low side pressure enough to trip the low pressure switch. When the system goes off, and the pressure equalizes, it has enough pressure at the low side switch to kick it back on. Add a can of refrigerant with leak detector and stop-leak to find out why it's low. (or get a sniffer to find te leak).

Aug 10, 2009 | 2004 Nissan XTerra

1 Answer

A/C COMP. WILL NOT KICK ON EVERY. SOMETIMES I CAN


THE AC COMPRESSOR JUST NEEDS TO BE REPLACED.

Jun 18, 2009 | Nissan Frontier Cars & Trucks

2 Answers

My A/C turns on anff quickly without cold air


look under the car. there is a small wired it sounds like the wired is broken in half...it only takes ten minutes to repair the wired... good luck

Jun 02, 2009 | 2003 Mercury Mountaineer

1 Answer

2000 Ford Taurus AC compressor not working;I tried putting freon......compressor has to kick-in in order to take in the Freon; compressor wouldn't kick in ; by pass the low pressure switch, Comp didn't...


the compressor doesn't have to be working for the gas to go in
you connect the gas to the inlet line and as the gas pressure in the system rises , the ac compressor will cut in normally and suck in the rest until the pressures are correct
of course you have to be putting in the correct gas because the switches are different

Nov 08, 2017 | 2000 Ford Taurus

Not finding what you are looking for?
1997 Buick LeSabre Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...