Question about 2002 Mitsubishi Eclipse

1 Answer

Where can I find a 6-wire pigtail for Idle Air Control

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 75,767 Answers

You can check with the mitsu dealer, they can get repair connectors from speciality suppliers for most sensors and controls on the engine, I know this because I did this type of work for years, the only other choice you will have is a salvage yard, many Mitsubishi cars will use this same connector so u are not limited to your particular model and year.

Posted on Oct 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the idle air control valve wiring harness located on a 2001 ford windstar


idle-air-control-valve-wiring-harness-prnuo4xtyj5wakm52h23pt2g-5-0.jpg

idle-air-control-valve-wiring-harness-prnuo4xtyj5wakm52h23pt2g-5-2.jpg


idle-air-control-valve-wiring-harness-prnuo4xtyj5wakm52h23pt2g-5-9.jpg

idle-air-control-valve-wiring-harness-prnuo4xtyj5wakm52h23pt2g-5-14.jpg this is the idle air control and the plug the wires may not be the same color the valve is located on the throttle body the photo's will make it easier to find it

Apr 05, 2015 | 2001 Ford Windstar LX

1 Answer

'93 chevy S-10 Blazer 4wd (automatic) high idle & I have already replaced the idle air control/throttle positioning sensor & have checked for vaccuum leaks. (none of the above have fixed the...


dont know if this will help but have you replaced the coolant sensor (by the thermostat ) and the pigtail that connects it to the wiring also the map sensor may be part of the problem my 92 s10 did some what of the same thing and I replaced the temp sensor and that didnt fix it untill I put a new pigtail that connects to the wireing my son had a blazer that also did that I think ( its been a while ago ) and we replaced the map sensor and that fixed it

Sep 17, 2011 | 1993 Chevrolet S-10 Blazer

1 Answer

Just started idling rough, sometimes stalling


Shot in the dark here without knowing the vehicle but it could be an Idle Air Control valve starting to fail. An IAC (idle air control) motor is designed to adjust the engine idle RPM speed by opening and closing an air bypass passage inside the throttle body. The cars computer or PCM (powertrain control module) receives information from various sensors and will output signals to adjust the idle air control motor in or out to adjust engine idle speed by controlling engine idle air. An idle air control motor can fail one of two ways, either the motor short circuits and stops working or the motor will develop high resistance and cause the idle air control motor to react slowly, either failure can cause the engine to stall at idle. When a trouble code scan is performed it sometimes won't always detect a failed or weak idle air control motor. To check the idle air control motor remove the unit, with the wires connected turn the key to the "on" position without starting the engine, the idle air control should move in or out. If the idle air control motor does nothing it has probably failed, replace it with a new unit and recheck system. Note: while the idle air control motor is removed clean (use aerosol carburetor cleaner) the passages the idle air control uses to control idle air speed, also inspect the idle air control for a build-up on the seating (pointed) end and clean as necessary.

Jul 20, 2011 | Mazda B2300 Cars & Trucks

1 Answer

A c not blowing hot or cold air


The wire harness is know to melt in your Yukon, there is a wire harness upgrade that GM has in there parts department to address your Blower motor issues. This harness has been updated to address the failures in the original (OEM) harness and previous versions of the AC Delco PT2195 pigtail and GM 15862656 pigtail. All wire gauge sizes have been upgraded to easily handle the current demands of the Blower Motor at all speeds. Heavy duty 12 ga. wires for the 12v power, ground (-) and the high blower circuit.
Good luck and thank you for using Fixya.

Mar 16, 2010 | 2002 GMC Yukon Denali

1 Answer

3.2 liter yamaha engine manual IAC valve How do I replace the IAC valve on this engine? Steps? I just bought a new one and I need to get it replaced. FORD 1994 Taurus SHO 3.2 liter engine YAMAHA


may just need cleaning with carb cleaner.

here is 1996, oldest I have:

Section 03-14: Engine Controls, Electronic 1996 Taurus, Sable Workshop Manual
REMOVAL AND INSTALLATION Idle Air Control (IAC) Valve Removal
  1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
  1. Disconnect the engine control sensor wiring (12A581) from the idle air control valve (IAC valve) (9F715) at the idle air control valve electrical connector.
  1. Remove the two idle air control valve retaining bolts.
  1. Remove the idle air control valve and idle air control valve gasket.
Installation
  1. NOTE: If scraping is necessary, be careful not to damage idle air control valve gasket surfaces, or drop material into intake manifold (9424) or throttle body (9E926) (depending upon application).

    Clean idle air control valve gasket mating surfaces.
  1. To install idle air control valve, reverse Removal procedure.
  1. Tighten the idle air control valve retaining bolts to 8-12 Nm (71-106 lb-in).
33b4417.gif

Jan 14, 2010 | 1994 Ford Taurus

2 Answers

Doesnt want to idle and when i shut it off all the gauges go all the way up and back


If no codes I would suspect the Idle Air Control Valve. Especially if it runs normal off idle.

Nov 09, 2009 | 1999 Jeep Grand Cherokee

3 Answers

I need an iac pigtail for a Nissan Maxima 2001


try an electronics supply store. They will carry various 4/6/8 pin connectors for use in autos.

May 16, 2009 | 2001 Nissan Maxima

1 Answer

I need a iac pigtail for a Nissan Maxima 2001


call your local salavge yard or pick n pull if you have one.
Nissan does sell a alrge wiring repair kit to dealers, but only a few have bought them. Call a bunch of delaers and ask if they have the kit with the platic hard shell connectors and wiring pins.

May 16, 2009 | 1998 Mitsubishi Galant

Not finding what you are looking for?
2002 Mitsubishi Eclipse Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...