Question about 1998 Dodge Dakota

Open Question

How do you adjust the clutch on a 98 dodge Dakota 4 cylinder

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76132 Answers

SOURCE: ac clutch going out on 93 dodge dakota

If the clutch is noisy from a bad bearing then don't drive far,if the compressor clutch pulley bearing seizes up it will freeze the pulley and the belt will burn off, and you are stuck, if you mean the anything else besides this drive it.

Posted on Dec 08, 2008

Ad
rockitman187
  • 2559 Answers

SOURCE: 1998/99 Dodge Dakota clutch and manual transmission problems

clutch needing replaced, very common on all manuals

pedal travel adjustment,yes
gear shift adjustment,no

Posted on May 12, 2009

  • 2187 Answers

SOURCE: Bleeding Clutch Cylinder with no bleeder screw

I have not tried myself but see if the link below will work for your case. It is not the same model as you have but most vehicles have the same components for the non electronic parts. http://www.2carpros.com/forum/1988-dodge-dakota--bleding-air-out-of-clutch-master-cylinder-vt248517.html

Posted on Jun 04, 2009

  • 29 Answers

SOURCE: 1990 dodge dakota cooling system capacity???

at the max two gal, mix 50/50

Posted on Oct 01, 2009

  • 204 Answers

SOURCE: 98 dodge dakota steering noise

take a look at your cv joints

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you bring the pedal height closer to the floor


There are clutch adjustments in the linkage between pedal and the clutch itself. I recomend you review a repair manual. your Library may have one. Auto parts store may have one. Try this: http://www.filepeep.com/ or google 1999 dodge dakota clutch adjustment in the "images" I bet you can find a good answer.

Mar 11, 2015 | 1999 Dodge Dakota

1 Answer

2001 dodge dakota sport with 2.5 engine idles high when I start it up, continues idling high, when pushing clutch in to change gears it idles extremely high


Does it do it if you disconnect the idle air control valve ?
You need to know if its a vac leak or if the computer is making the valve open too far.

Feb 09, 2014 | 2001 Dodge Dakota

2 Answers

Need to know the firing order


For all Dodge V8 truck engines, the firing order is 1-8-4-3-6-5-7-2. For all Dodge V6 truck engines, the firing order is 1-6-5-4-3-2. For Dodge inline 6 cylinder engines, the firing order is For all Dodge 4 cylinder engines, the firing order is 1-3-4-2 All dodge distributors rotate clockwise.


look at your distributor cap while standing on the driver's side of the vehicle.
Start at number 1, which is labelled on the cap, and go
clockwise

Good Luck

Oct 28, 2009 | 1998 Dodge Dakota

1 Answer

1998/99 Dodge Dakota clutch and manual transmission problems


clutch needing replaced, very common on all manuals

pedal travel adjustment,yes
gear shift adjustment,no

May 12, 2009 | 1998 Dodge Dakota

1 Answer

Changing from 98 2.5 man.tranny,to 01 3.9


WOW. You want to put a 3.9 ltr V6 from a 2001 Dakota into a 1998 Dakota with a 2.5 ltr 4 cylinder? And you want to keep the manual trans? Have you considered what you will be using for a fuel and engine managment system? If you have a wrecked truck as a host vehicle then the changover may work. But it will take patience and a lot of work. I don't think the 4 cylinder trans will bolt up but I am not sure - never tried that. However that light duty trans will probably not handle the torque for very long even if it did bolt up. Your local Auto Salvage Yard will have a changeover guide and be able to tell you if that trans will fit either engine. My recommendation is to swap everthing and change that 98 to a 01, auto trans and everything.
Good Luck
Let me know how it goes?

Mar 08, 2009 | 1995 Dodge Dakota

1 Answer

1998 Dodge dakota 4 cyl. manual trans.


You may want to try adjusting the clutch. I think Dodge have adjustment options. it seems that the throw out bearing is too close to the clutch and does not "throw out' as it should.

Oct 24, 2008 | 1998 Dodge Dakota

Not finding what you are looking for?
1998 Dodge Dakota Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...