Question about 1995 Jeep Grand Cherokee

1 Answer

Removing and reinstalling a new headlight assembly in a 95 jeep grand cheerokee

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,826 Answers

LIGHTING Headlights REMOVAL & INSTALLATION Cherokee, Wagoneer and Comanche Models Fig. 1: Remove the top corner headlight bezel mounting screw removing and reinstalling a new headlight assembly - 91076p12.jpg
Fig. 2: To access the turn signal bulb or headlight bezel mounting screws, remove the 2 turn signal housing retaining screws 91076p13.jpg
Fig. 3: After removing the turn signal housing from the headlight bezel, removing and reinstalling a new headlight assembly - 91076p27.jpg bezel mounting screws . . . 91076p27.jpg
removing and reinstalling a new headlight assembly - 91076p11.jpg4: . . . then carefully pull the headlight bezel away from the headlight assembly 91076p11.jpg
Fig. 5: Remove the 4 headlight assembly retaining ringremoving and reinstalling a new headlight assembly - 91076p06.jpg. 91076p07.jpg
Fig. 6: . . . then pull the retaining ring off of the headlight assemblremoving and reinstalling a new headlight assembly - 91076p28.jpg="http://i.fixya.net/uploads/images/91076p06.jpg" alt="91076p06.jpg" class="h_mi" />
Fig. 7: Pull the headlight assembly away from the vehicle just far enough to disengage the electrical connector from behind the headlight 91076p28.jpg

  1. Remove the headlamp bezel and retaining ring attaching screws. Remove the bezel and retaining ring.
  2. Pull the headlight out, disconnect the wire harness and remove the headlight from the vehicle.
  3. Install the headlight in the reverse order of removal.
Grand Cherokee and Grand Wagoneer Models
  1. Open the hood, reach into the engine compartment and locate the lock ring supporting the bulb assembly.
  2. Rotate the lock ring 1?8 turn counterclockwise and pull the bulb straight out from the housing. To install:
  3. Install a new bulb and position the bulb assembly in the lamp housing.
  4. Rotate the lock ring 1?8 turn clockwise to secure.
----
The Grand Cherokee will have an assembly that is fastened with bolts and screws to the body.
Get the new assembly and compare to the old one to see where to unfasten the bolts and other fasteners to aid in removing quickly.

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Need to replace right side low beam headlight on 2003 jeep grand cherokee. do i need to remove the battery?


the glove box , operators guide covers this,,, in most cars
seems its not , in the last free year published 2004
but is in the FSM, on mpage 8L-17
2003 WJ "lighting"
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

Rtm
excerpt: this is step 1, (step 3 is bingo)
25308090-43uikwyueni1btdprhgcswjj-2-0.gif

Dec 05, 2014 | 2003 Jeep Grand Cherokee

1 Answer

How to remove a headlamp assy from a 1998 jeep grand cherokee


I believe the headlight assembly just pulls straight out. There are locating lugs on the headlight assembly which line up with corresponding lugs on the body work. There is also a problem with the headlight glass falling out as well. Replacements can be bought at the right price on e'Bay.

Feb 27, 2010 | 1998 Jeep Grand Cherokee

1 Answer

Remove tailight assembly from 2003 jeep grand cheerokee


open the lift gate. look on the side that you are taking off. there should be two phillips head screws holding on a small bracket. remove them. next gently pull on the tail light assembly. once loose unplug the wiring harness and you are done. installation is reverse of removal.

Feb 13, 2010 | 2004 Jeep Grand Cherokee

1 Answer

Looking for instructions on how to replace headlights on a 1996 Jeep Grand Cherokee; purchased replacement fixtures, but can't figure out how to remove/replace.


Is this the headlight bulb replacement or headlight (assembly) replacement? For bulb replacement:
1. Disconnect negative side of battery.
2. Open hood.
3. Reach behind the neadlight assembly and disconnect the wiring connectors.
4. There is a locking ring around the back of the headlight assembly. Turn this counterclockwise.
5. Gently pull out the bulb.
6. Insert new bulb into the locking ring.
7. Place these back onto back opening and turn clockwise making sure it is flush and totally engaged.
8. Replug wiring connector.
9. Reconnect negative side of battery.
10. LIGHTS!!

Nov 25, 2009 | 1996 Jeep Grand Cherokee

1 Answer

How do I change the Driver's side Front Headlight on the 1998 Plymouth Grand Voyager?


  1. Unscrew the three screws that secure the headlight assembly to your Dodge Caravan. Put the screws in your pocket or another safe place, so you won't lose them before reinstalling the headlight assembly.
  2. Pull the headlight assembly away from the front of the vehicle. Turn the bulb retaining ring counterclockwise to unlock the electrical connector. Remove the electrical connector from the bulb assembly by pulling it straight out.
  3. Replace the old bulb with a new halogen headlight bulb. Connect the electrical connector and turn the bulb retaining ring clockwise to lock the bulb into place.
  4. Reinstall the headlight assembly and secure the screws tightly before closing the hood. Turn on your Dodge Caravan, flip on the headlights and verify they're working properly.

Oct 16, 2009 | 1998 Plymouth Grand Voyager

1 Answer

1993 Jeep Grand Cherokee headlight assembly removal


Thairs 2 screws under head light and one on top corner of light.

Sep 19, 2009 | 1993 Jeep Grand Cherokee

2 Answers

Jeep Grand Cherokee Laredo 1998 headlight assembly instructions


youtube.com type in 1998 grand cherokee headlight assembly, I just fixed mine in 10 minutes, both of them!

Mar 31, 2009 | 1998 Jeep Grand Cherokee

1 Answer

Want to replace the headlights on my 2001 jeep grank cherokee lar


They are very simple to replace, only a few screws then you pull the light out. Open the hood, on top there is I think a 10mm screw. It's very long in length goes from the top of the light down through the bottom. If I remember correctly there is another screw, once these are removed the light will wiggle and you can pull really hard outward. The lights pop right out.

Dec 17, 2008 | 2001 Jeep Grand Cherokee

2 Answers

No headlights


Try looking under the Air Filter intake box under the hood driver side. You will probably have to take the box out to get to the Plug. There is a Plug there that corrodes and the wires break off.

Jul 13, 2008 | 1995 Jeep Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

764 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...