Question about 2005 Nissan Sentra

1 Answer

Injector coil replacement of injector coil

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 241 Answers

THIS IS FOR A 2.5
Removal and Installation
REMOVAL

  1. Remove the engine cover using power tool.
  2. Disconnect the harness connector from the ignition coil.
  3. Remove the ignition coil. CAUTION: Do not drop or shock it. INSTALLATION Installation is in the reverse order of removal.

SAME FOR THE 1.8
NEED EMAIL TO SEND IMAGES

Posted on May 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My car is showing a p0304 code and it wont start, it was running bad I think timing is off how do I fix


Please go to this site, It will give full details on po304. God-Bless! www.obd-codes.com/po304

May 21, 2016 | Cars & Trucks

1 Answer

06 Cobalt LT 2.2 misfire on #1 cyl. Local parts check code


misfires can be caused by plugs , HT leads and coil/s-- AND--- bad injectors, low fuel pressure. Pull the injector for no 1 and have it checked out.as t may be the injector or the wires and connections for that injector. Make sure that the HT leads are not touching each other as it may cause a misfire on the cylinder as well

Dec 01, 2013 | 2005 Chevrolet Cobalt

1 Answer

I have a 1997 ford escort and it keeps blowing fuel injector fuses.can you point me in the right direction.


You probably have a shorted fuel injector coil or driver transistor. To find the problem, you need an ohmmeter (digital multimeter set to 200 Ohm scale). This test procedure is done with the car shut off.

Remove the connector from one of the fuel injectors. Measure the resistance between the two terminals and write it down. Next, hold the black (common) test lead of the ohmmeter to a nice, clean ground spot (anywhere on the engine is OK) and push the red (+) lead of the ohmmeter into one of the sockets on the injector connector. Repeat with the other socket. Both should read very large or open values. If you get a reading under 1 Ohm on the connector, you have a shorted driver transistor and the ECM will have to be repaired or replaced.

Plug the injector connector back in, and repeat the test with the next injector. If you find an injector with a coil resistance much less than the others, that injector has a short in the coil and it must be replaced. The readings should be within 5% of each other.

If your car has throttle body injection (only one injector), the coil resistance should probably be about 10 to 20 Ohms. I suggest calling the service department at the local Ford dealer and asking what the fuel injector coil resistance is supposed to be.

Do not be surprised if you find the driver transistor is shorted and the coil is also shorted or burned out; if one part goes bad there is a good chance it will ruin the other (a shorted transistor will keep the injector on all the time and overheat the coil; a short in the coil will allow too much current in the transistor and overheat it. If you are having a "not-so-bad" day, the fuses blew quickly enough to prevent the double failure.

Mar 22, 2011 | Ford Escort Cars & Trucks

1 Answer

PO301 code on Hyundai Sonata. Replaced wires, plugs, coil packs, and mass air flow sensor.


P0301 - Cylinder 1 Misfire Detected.


Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder


Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Jan 17, 2011 | Hyundai Motor 2003 Sonata

1 Answer

Giving a 300 and a 301 code where do i start sounds fine when started and then when you put in gear it start misfiring


P0300 - Random / Multiple Cylinder Misfire Detected

Possible Causes:
- Improper spark plug
- Insufficient compression
- Incorrect fuel pressure
- The injector circuit is open or shorted
- Fuel injectors may be faulty
- Intake air leak

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plugs
- Replaced Injectors
- Replaced Ignition Coils

P0301- Cylinder Number 1 Misfire Detected

Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Most likely your issue is with cylinder number 1. Follow the info I have provided and you should be able to solve this issue.

Jan 14, 2011 | 2002 Toyota Tacoma

1 Answer

308 code i change sparks ignition coil same problem


Code P0308 - Cylinder 8 Misfire Detected

Possible Causes:
- Improper spark plug at cylinder #8
- Insufficient compression at cylinder #8
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #8
- Fuel injector #8 may be faulty

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #8
- Replaced Injector #8
- Replaced Ignition Coil #8

Jan 14, 2011 | 2000 Ford Expedition

1 Answer

2001 mazda tribute fuel injector diagram. #4 cylinder missing so I need to replace plug, injector(this is where I think the problem is-had the cleaned with drip procedure and got better, now worse again,...


if you have a cylinder 4 miss fire it is more likely to be the coil and not the injector. I have replaced a ton of coils on these for miss fires but don't think I've done an injector for this problem yet.

Jul 13, 2009 | Mazda Tribute Cars & Trucks

1 Answer

Missing on one cylinder


Replace the coil going to that cylinder, and then replace the valve cover gasket to prevent further oil from getting on the new coil. If it is not the coil, the crank sensor could have gone bad in it.

Aug 02, 2008 | 2001 Pontiac Grand Am SE

Not finding what you are looking for?
2005 Nissan Sentra Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...