Question about 1996 Pontiac Grand Am

1 Answer

How to replace spark plugs2.4 1996 grand am - 1996 Pontiac Grand Am

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 3,640 Answers

On 2.4 engines, remove the 4 bolts that hold on the ignition coil cover, top of engine. pull the cover straight up-some of the plug boots may stick to the plugs, but can be pulled from plugs with a puller or similar tool. pull the boots from the plugs and reattach them to the coil towers on the bottom of idi cover.

Posted on Oct 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the spark plugs


Locate the spark plug wires in the Cherokee cylinder head. In the 4.0 liter engine, the spark plugs are below the coil rail assembly. On the 4.7 liter engine, the spark plugs are located under each corresponding engine coil.


Read more: How to Replace Spark Plugs in a Jeep Grand Cherokee ' eHow.com http://www.ehow.com/how_4484626_replace-spark-plugs-jeep-grand.html#ixzz27zi6736d

Sep 30, 2012 | 2000 Jeep Grand Cherokee

1 Answer

My 1994 Jeep grand cherokee won't start. It tries to start but doesn't. Tried replacing cap and rotor and still will not start. When I checked the spark it was yellow. What does that mean?


Yellow means weak spark should be blue check the coil tower where the coil wire attaches on the coil for corrosion. Also check the spark plugs for wear.

Feb 03, 2012 | 1994 Jeep Grand Cherokee

1 Answer

I got code PO 305 on a 2002 Mercury Grand Marquis, what is the spark plug wire part called, is it #5 coil, and should I replace the coil and spark plug and what should the spark plug be gapped at? Thank...


I got code PO 305 on a 2002 Mercury Grand Marquis, what is the spark plug wire part called
This will have a direct coil over ignition with a coil over each spark plug. The coil is the electrical part over the spark plug. The coil also has a rubber part that is called the boot or spark plug boot. The boots can be purchased separately but the coils will come with new boots.

is it #5 coil,

Have you checked to see if there is any spark coming out of the number 5 coil?



and should I replace the coil and spark plug and what should the spark plug be gapped at?

When was the last time the spark plugs where changed? It may be due for all the spark plugs to be changed. The spark plug gap is usually listed on the emissions sticker under the hood. It should be .050 - .056 or very close to that.

May 16, 2011 | 2002 Mercury Grand Marquis

2 Answers

How to replace spark plugs on 2000 jeep cherokee classic 6 cyl.? Also does 2000 cherokee have inline fuel filter?


TO REPLACE SPARK PLUGS YOU REMOVE COIL PACK MOUNTING BOLTS THEN REMOVE THE COIL PACK WITH BOOT OVER THE SPARK PLUG.YOU HAVE 6 INDIVIDUAL COIL PACK TO EACH CYLINDER. YOU NEED A 3/8 RATCHET WRENCH - LONG 3/8 EXTENSION -SPARK PLUG SOCKET - SPARK PLUG GAUGE.AND TORQUE WRENCH.THE 2000 MODEL JEEPS FUEL FILTER INSIDE THE TANK.1993 - 1996 MODEL JEEPS FUEL FILTER LOCATED LEFT SIDE OF THE VECHICLE NEAR THE FUEL TANK.

Jul 20, 2010 | 2000 Jeep Grand Cherokee

2 Answers

Where are the spark plugs located on a 2000 Mercury grand Marquis?


There are eight COPs (coil-on-plugs) to remove. Using a 7mm or 9/32" socket, remove each bolt securing each COP to the intake manifold on top of the engine. Remove all eight COPs, and the spark plugs are underneath. When replacing the spark plugs, use only the proper Ford/Motorcraft plugs, even if they cost twice as much as the aftermarket ones. You will avoid further headaches this way. Hope this helps.

Mar 30, 2010 | 2000 Mercury Grand Marquis

1 Answer

93 jep grand cherokee spark issues


Just a thought you might want to check the plug that connects the coil to the wiring loom .......maybe some corrosion .

Jun 26, 2009 | 1996 Jeep Grand Cherokee

2 Answers

96 grand cherokee crank no start, no spark from


have the crank sensor replaced this controls the spark and injector pulse it is located on the drivers back side of the engine above the transmission housing!

Jun 08, 2009 | 1997 Jeep Grand Cherokee

1 Answer

No spark


Check the asd relay in the fuse block. Replace it with a known good relay

Apr 26, 2009 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Pontiac Grand Am Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...