Question about 2001 Daewoo Lanos

1 Answer

Changed cam shaft sensor now code says low voltage

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 198 Answers

Remove the battery, put a full charge in it and reinstall it. Auto Zone will charge your battery for free, 30 min's to an hr. usually

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Voltage low on cam sensor what do I ck to fix the problem car spits and sputters on take off but when u get going it does ok


Voltage low on cam sensor ,how do you know that ? Is there a DTC - diagnostic trouble code associated with this ? Low voltage codes usually indicate an open on the circuit . Camshaft Position Sensor Circuit Quick Test

Apr 09, 2016 | 2002 Mercury Cougar

Tip

CMP - Cam shaft Position Sensor


<p><b><span>3.2) <span> </span><u>CMP - Cam shaft Position </u>(sensor)<u> </u></span></b><br /> <p><b><u><br /></u></b><br /> <p><b><span>What is it?</span></b><span><span> </span>This electrical device is very similar in concept to the crank position sensor (above) in that it detects the position of the rotation of a shaft, in this instance the cam shaft.<span> </span>It is the cam shaft signal that indicates to the ECU that cylinder one is at top dead centre at compression and in the process provides the ECU with the timing reference for fuel injection.<span> </span>The cam shaft sensor provides extra information, to that of the crank sensor, to fine tune timed events such as injection and spark delivery.</span><br /> <p><span> </span><br /> <p><b><span>Where is it located?</span></b><span> The location of this device depends on the design and age of engine.<span> </span>On many modern overhead cam shaft engines the cam shaft sensor is located either on the end, or to the side of the end, of the cam shaft housing.<span> </span>On older pushrod engines the cam sensor is found where the distributor would once have been located.<span> </span>This type sensor assembly makes use of the distributor shaft meshing directly, at its bottom end, with a gear on the cam within the engine block.<span> </span>In this respect the distributor shaft is just an extension of the cam shaft.<span> </span>On the top end of this distributor shaft is a magnetic armature.<span> </span>The cam shaft sensor, that measures the movement of this armature, is located in the cover and uses either magnetic or 'Hall effect' pickup modules.<span> </span></span><br /> <p><b><span> </span></b><br /> <p><b><span>How does it work?</span></b><span><span> </span>The sensor detects the position of a magnet or set of teeth on the gear on the end of the cam.<span> </span>An electrical waveform output signal is sent to the ECU as the cam turns.<span> </span>The cam sensor tells the ECU that cylinder 1 is at TDC on its compression stroke prior to ignition. <span> </span>The cam sensor ensures the correct timing of the fuel injection cycle.<span> </span>If the timing belt ever jumps a tooth on the cam the lack of agreement between the respective signals from the cam and crank sensors is indicated as an error condition by the ECU. </span><br /> <p><b><u><span><span> </span></span></u></b><br /> <p><b><u><span>Symptoms of faulty cam sensor</span></u></b><br /> <p><b><span>Associated OBD2 error codes DTCs: <span> </span>P0341 - P0349; P1345</span></b><br /> <p><b><span> </span></b><br /> <ul> <li><b><span>Hesitant acceleration - </span></b><span>miss-timing of fuel injection due to a faulty CMP can cause intermittent loss of power.<b></b></span></li> <li><b><span>Starting difficulty/failure.<span> </span></span></b><span>If the faulty CMP timing problems are severe they may cause the engine not fire at all, or to fire and then stall, or stall at some random time without warning.<b></b></span></li> <li><b><span>Hot engine stall and failure to restart - </span></b><span>Sometimes the fault of the CSS only manifests itself when the engine is hot.<span> </span>Over time thermal stress can cause cracking and can weaken electrical junctions within the CMP.<span> </span>The CMP may work well at cold start up but can then cause a hot running engine to stop with little chance of restart whilst the engine is still hot;<span> </span>once cooled the down the engine may readily restart and again run for a limited period until hot.</span></li></ul> <p><b><u><span>Note </span></u></b><span>The cam sensor body often protrudes into the cam shaft gallery and when it's 'o' ring seal<span> </span>becomes age hardened, engine oil may leak back into the sensor electrical socket plug connector causing errors due to interruption of signal. </span><br /> <p><b><span> </span></b><br /> <p><b><span>How to check? </span></b><span>It is not technically<b> </b>easy<b> </b>to determine that the CMP is at fault and, like the crank sensor, may require the use of an oscilloscope.<span> </span>If it is part of a sophisticated on board diagnostics system its failure may be logged as a specific error code in the ECU. Due to the variability problems with engine running are often experienced well before any error codes are set by the ECU.</span><br /> <p><span> </span><br /> <p><span><span> </span>2 pin socket (magnetic - sine wave output).<span> </span>One pin is 'ground' the other is 'signal'.<span> </span>A voltmeter set to 2 volts AC should measure a signal in the 0.2 to 2 volts range on the 'signal' pin.</span><br /> <p><span><span> </span>3 pin socket (Hall effect, magneto - square wave form output).<span> </span>One pin is 'reference' (5volts), one pin is 'ground' and the third pin is 'signal'.<span> </span>A DC voltage should be detectable in the 0.5 to 1.5 volt range from the 'signal' pin.</span><br /> <p><span>It is important that the voltage measurement take place at start up when the engine is cold and again, 20 minutes later, when the engine has fully warmed up to operating temperature. Often the voltage output from faulty sensors declines with temperature rise.</span><br /> <p><span> </span><br /> <p><b><span>How to fix?<span> </span></span></b><span>If the CMP failure is due oil leakage into the electrical connector then a thorough clean and a renewal of the oil seal on the CMP may correct the situation.<span> </span>It can be a wise precaution to change the connecting cable as oil migration beneath the insulation may possibly contaminate components at some distance to the CMP.<span> </span></span><br /> <p><span>If the CMP has an internal fault then it must be replaced.</span><br />

on Jul 22, 2011 | Mercedes-Benz E-Class Cars & Trucks

2 Answers

Code p0340, p0462 on subaru outback 2001


Po340 is a cam shaft sensor and po462 is low voltage on your fuel guage. So i assume you are haveing fuel level issues. If you can turn wrenches you can do these repairs yourself. Just do a google search and you can get some youtube videos of sensor replacement and location. Have fun.

Aug 29, 2014 | 2001 Subaru Outback

2 Answers

Pcm?


PCM= Powertrain Control Module. It is the brains of the car, it reads the sensor in put from all sensors including the cam shaft position sensor

May 14, 2014 | 2004 Toyota 4Runner

1 Answer

My 2004 VW Passat 1.8 turbo has had quite a few problems. In February my car started flashing OIL PRESSURE TURN MOTOR OFF whenever I'd hit 2000 RPM. SO I got my oil changed and my pressure checked and it...


With all of the low voltage problems going on here I would check the body computer. That is the only thing I can think of that would cause all of this. Some others may have suggestions on this.

Apr 06, 2014 | 2004 Volkswagen Passat

1 Answer

P0016 what is that n how u fix it


P0016 Crankshaft Position - Camshaft Position Correlation
P0135 O2 Sensor Heater Circuit
P0138 O2 Sensor Circuit High Voltage
P0340 Camshaft Position Sensor "A" Circuit
P0344 Camshaft Position Sensor "A" Circuit Intermittent
P0508 Idle Air Control System Circuit Low
P0522 Engine Oil Pressure Sensor/Switch Low Voltage
_____________--
JMA TRS-5000 Cloning Machine

Jun 03, 2013 | Cars & Trucks

2 Answers

05 kia amanti with diagnostics codes p0350,p0320,p0300,p0302,p0303,p0304,p0305,p0306.skipping at times.when it does skip & misfire the rpm gauge goes crazy.this problem is not consitant


Generic OBD II Diagnostic Trouble Codes

DTC CODES P0300 to P0399

P0300....Random/Multiple Cylinder Misfire Detected

P0301....Cylinder 1 Misfire Detected

P0302....Cylinder 2 Misfire Detected

P0303....Cylinder 3 Misfire Detected

P0304....Cylinder 4 Misfire Detected

P0305....Cylinder 5 Misfire Detected

P0306....Cylinder 6 Misfire Detected

P0307....Cylinder 7 Misfire Detected

P0308....Cylinder 8 Misfire Detected

P0309....Cylinder 9 Misfire Detected

P0310....Cylinder 10....Misfire Detected

P0311....Cylinder 11 Misfire Detected

P0312....Cylinder 12 Misfire Detected

P0313....Misfire Detected with Low Fuel

P0314....Single Cylinder Misfire (Cylinder not Specified)

P0320....Ignition/Distributor Engine Speed Input Circuit

P0321....Ignition/Distributor Engine Speed Input Circuit Range/Performance

P0322....Ignition/Distributor Engine Speed Input Circuit No Signal

P0323....Ignition/Distributor Engine Speed Input Circuit Intermittent

P0324....Knock Control System Error

P0325....Knock Sensor 1 Circuit (Bank 1 or Single Sensor)

P0326....Knock Sensor 1 Circuit Range/Performance (Bank 1 or Single Sensor)

P0327....Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)

P0328....Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)

P0329....Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)

P0330....Knock Sensor 2 Circuit (Bank 2)

P0331....Knock Sensor 2 Circuit Range/Performance (Bank 2)

P0332....Knock Sensor 2 Circuit Low Input (Bank 2)

P0333....Knock Sensor 2 Circuit High Input (Bank 2)

P0334....Knock Sensor 2 Circuit Input Intermittent (Bank 2)

P0335....Crankshaft Position Sensor A Circuit

P0336....Crankshaft Position Sensor A Circuit Range/Performance

P0337....Crankshaft Position Sensor A Circuit Low Input

P0338....Crankshaft Position Sensor A Circuit High Input

P0339....Crankshaft Position Sensor A Circuit Intermittent

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

P0341 Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 1 or Single Sensor)

P0342....Camshaft Position Sensor 'A' Circuit Low Input (Bank 1 or Single Sensor)

P0343....Camshaft Position Sensor 'A' Circuit High Input (Bank 1 or Single Sensor)

P0344....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 1 or Single Sensor)

P0345....Camshaft Position Sensor 'A' Circuit (Bank 2)

P0346....Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 2)

P0347....Camshaft Position Sensor 'A' Circuit Low Input (Bank 2)

P0348....Camshaft Position Sensor 'A' Circuit High Input (Bank 2)

P0349....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 2)

P0350....Ignition Coil Primary/Secondary Circuit

Nov 17, 2010 | Kia Amanti Cars & Trucks

2 Answers

I have a dodge truck 2004 cummins engine with codes reading. p o 0191, 0193, 0652, 0341, 0069 can you tell me what all the codes mean?


0191 is fuel rail pressure sensor circuit range/performance 0193 fuel rail sensor circuit high input 0652 sensor reference voltage b circuit low 0341 cam shaft position sensor a circuit range/performance (bank1 or single sensor) and 0069 map barometric pressure correlation
i hope that helps you some what

Aug 14, 2010 | 2004 Dodge Ram 2500

1 Answer

MAF Low Voltage Cam shaft sensor at -45 degrees and trouble with transmission shifting properly was told was all related


Yes and no.....change the CamShaft position sensor first and it may clear the other problems

Aug 07, 2010 | 1997 GMC Sierra

1 Answer

I have a 1996 camaro, 3.8. Have really been having alot of problems, idle seems low, i get a code P300 ( random misfire) and a Cam shaft sensor code, I replaced the cam sensor 2 times, changed the plugs...


you can disconnect the battery for about 2 min and that should clear any codes that are stored in in it or take it to autozone or someplace that will erase the codes for you i hope this helps

Apr 11, 2010 | 1996 Chevrolet Camaro

Not finding what you are looking for?
2001 Daewoo Lanos Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...