Question about 1984 Chevrolet Camaro

1 Answer

Wiring I'm trying to find a schematic diagram so I can hook up the engine wiring hjarness. In other words I guess I need to know where each wire connects. The car has 6 wires because it's electric windows etc. HEELLPP

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 99 Answers

Check your local library for a Mitchell Manual. If that doesn't help, you can either buy your local mechanic a 12 pack to peek at his schematic or you can visit the local junk yard and see how the harness in another car is installed. Don't worry if you don't find your exact vehicle as the wire colors generally do not change much between models and years. I can't help to wonder why you don't have an existing harness to guide you in your replacement.

Posted on Jul 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need wiring schematics to troubleshoot some electrical shorts


Way to many diagrams to guess to send. What components are working. Check engine light on?

Nov 01, 2015 | 1992 Buick LeSabre

1 Answer

I need to know how to put these wires back togather on my 1965 Ford Deseial Tractor


this is a difficult request but generally if the wire have been cut the wires of the same color will be able to be rejoined ok
so any red wires are generally power wires so connect to red wires and black are earth wires so connect black to black and so on
you local ford tractor service dealer may have a schematic for the wires in an old manual
a judicial use of a multimeter is also a good idea
try -going google and typing in-- wiring schematic wiring diagram for --- your make and model of machine and see if there is a pdf version available

Aug 10, 2015 | Ford Cars & Trucks

1 Answer

Tachometer connection


you can search your particular vehicle schematic or find it in a chiltons or haynes book look for the engine schematic and the wire will be connected to your #1 coil + wire on separate coils if you have coil packs for 3-4 plugs each there should be 3 wires 2+ones 1-return find the + associated with the #1plug

Aug 14, 2014 | Cars & Trucks

2 Answers

How to connect a new era alternator voltage regulator wiring diagram.Or a schematic diagram of the charging system.


knowing the color codes can be a great help..usually in 12v reg system,from the regulator there are 6 white wire having a stripe codes,blue means neutral,green means field,black means ground to body,white means hot wired to +12v,yellow means to bat charging indicator going to instrument panel and finally red means to ignition....and always secure the regulators case to ground.

Jul 19, 2011 | Isuzu i-Series Cars & Trucks

2 Answers

Vacuum lines diagram 351m


Click over diagram for zoom...

zjlimited_1008.jpg

Fig. 6: Vacuum schematic - 351M engine





zjlimited_1007.jpg

Fig. 7: Vacuum schematic - 351M engine


Hope this helps (remember to rate and comment this answer).

Apr 12, 2011 | 1981 Ford F 150

2 Answers

Trying to install a push button ignition need to know which two wires to run to the button, without having to spend hours tracing and guessing. A diagram showing the wires would be great.


Your switch has 4 terminals.

1. Red is the hot wire from the battery.
2. Dark Blue is the run wire. This wire powers PCM, and engine and well as all accessories when the key is on.
3. Yellow is the start wire. It powers the engine, ECU and starter circuit when the key is turned to start.
4. Last terminal is accessories. I don't know the color, but it will power the radio, blower, windows, mirrors, etc. when key is turned to ACC. Some diagrams of the switch are below. Please let me know if you have any questions.


jturcotte_142.gifjturcotte_143.gif

Nov 12, 2010 | 1996 Dodge Dakota

1 Answer

I need to know how many wires go to a 1989 ford econoline fuel pump with a 460 efi engine


I suggest check this wiring diagrams for code color wires...


1989 5.0L & 5.8L & 7.5L ENGINE SCHEMATICS

2fa9322.gif




1989-91 CHASSIS (GASOLINE)SCHEMATICS

6dd87e2.gif



1989-91 CHASSIS (DIESEL) SCHEMATICS

1887a7c.jpg


Hope this help.

Mar 23, 2010 | 1989 Ford Econoline

Not finding what you are looking for?
Cars & Trucks Logo

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...