Question about Ford Taurus

1 Answer

Turn signals work and then turn off -nothing, then may work again a few times and off again

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 128 Answers

I can only think of 2 things , 1 is that your flasher relay needs changing , this usualy is under the dash in most vehicles near your legs whilst driving , this relay is usualy round shaped like a mini coke can , i would suggest replacing this first as this is the cheaper option , if not succefull it may be the indicater arm itself which would require you to remove steering wheel to remove and replace!

but the first option sounds like the cause as relay contacts may be shorting out and getting stuck , thus being the reason for working intermittantly . if both these solution fail then you may have a short in the wiring , but have faith and try the cheaper option first .

good luck

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 kia sorento keyless entry not working


If both remotes light up and don't work even right next to the car, the car and remotes may need to be paired again. I found where someone mentioned disconnecting the car batter for more than one minute but less than five and seeing if it works again. If not, you may have to get it checked at a dealer. Most of these fobs are only programable with special tools at the dealer. I've purchased nissan oem fobs new on ebay, but still had to pay the local dealer to get them to work.

Apr 17, 2017 | 2003 Kia Sorento

1 Answer

My blinkers work sometimes and then stop working for a while, then will start working again for no reason, its very random. I dont know what i should do to get this fixed.


The turn signal flasher is bad. It is built into the hazard switch. Replace the hazard switch. The next time the turn signals quit turn the hazard switch on and off a few times and see if they start working.

Oct 12, 2010 | 2004 Oldsmobile Alero

1 Answer

Turn signals stop working


turn signals work for a few times and then won't come on -completely then will come on again for a while and then
off again

Oct 03, 2010 | 1993 Ford Probe

3 Answers

1993 Geo Prizm turn signals dont work. Hazard lights DO work. Checked fuse several times & its ok. Any suggestions?


You have a bad turn signal switch if the hazards work and the turn signals do not. It has nothing to do with the fuse or the flasher unit. Your switch is bad or you have a bad connection some where.

Feb 15, 2010 | Geo Prizm Cars & Trucks

1 Answer

Turn siganl malfunctioning, already replaced the hazard switch and the turn signal module


had the same problem as you. I replaced the relay twice before it worked right. Just to test if it is the relay what I did was when the turn signal quit working I pushed the hazard button a few times then the turn signal started working again. Good Luck hope this helped

Jan 17, 2010 | 2004 Pontiac Grand Am

1 Answer

2006 Durango Turn Signal Issues


SOUNDS LIKE YOU HAVE A FAULTY MULTIFUNCTION SWITCH

Jul 27, 2009 | 2005 Dodge Durango

1 Answer

Turn signal problems on 98 Grand Voyager


Replace the turn signal relay. (daylight running lights and turn signal in one unit) It costs about 50 dollars.

Jun 21, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Turn signals will not work on 2000 cherokee sport


the problem is most likely the flasher module.

Apr 09, 2009 | 2000 Jeep Cherokee

1 Answer

Turn signals sometimes don't work


Change the flasher to an electronic unit. They are far less likely to give you trouble.

Dec 14, 2008 | 2002 Chevrolet Malibu

1 Answer

1998 S90 Turn signal problem


I had the same problem with a 960. I checked the rear turn signal bulbs and they were okay. I took a look at the front left turn signal bulb and the two contacts on the bottom of the bulb had melted into one contact. If you remove the bulb, the turn signal will function again when the parking or headlights are turned on, but will flash fast since there is no bulb in the socket. You may also want to check the socket of the bulb to be sure that they are not shorted together.

Hope this works.

Nov 18, 2008 | 1996 Volvo 960

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...