Question about 1984 Chevrolet Chevy

1 Answer

I have a 84 silverado 1500 4x4 pickup. the dash lights and rear marker lights are off and cant figure out why. fuse is good and wiring all seems good. what can i do the manual doesnt help or chiltens

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,002 Answers

The headlight switch needs to be replaced. Hope this helps.

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put new after market rear bumper on my 2002 chevy Silverado 2500hd and my new license plate light has one wire and old light has 2 wire so I just connected the hot wire to new light and now my rear tail...


Check for that fuse in a fuse panel under the dash.
That second wire from the old light is a ground wire, whereas the new light's socket is case grounded if there is no ground wire for the light. If the fuse for the tail lights is good, check if the tail lights lost a ground .

Aug 07, 2013 | 2006 Chevrolet Silverado 2500HD 2WD

1 Answer

03 silverado, rr turn signal not working , fr turn signal does work, all new bulbs , fuses are ok . no vdc to rear plug, the outher lights on this harness do work . running ,break marker light, is the


could have a break in the wire going to the blinker part. would have to have that checked via a multimeter to make sure all connectors are getting power

Aug 16, 2012 | 2003 Chevrolet Silverado 1500

1 Answer

Marker lights do not work. 1994 nissan pickup SE


I would start by checking all the fuses, then check the headlight switch,test it for power as you did the tail light, then check the wiring coming out of the cab down the frame to the rear of bed check for a short but if all fuses are good then will not be a short, may be a bad switch and the most important is the bulbs, make sure they are good.

Jul 05, 2010 | 1994 Nissan Pickup

1 Answer

Brake light dont work. 2006 chevy truck, 4.8L 2wd


Some of these had two fuses for brake lights. One for the top/center stop lamp and another for the rear left and right brake lights. Usually one said "stop" and the other said "brake" and one was in the underhood panel while the other was in the dash fuse panel. It's not uncommon to blow a brake light fuse [LR and RR] if you tow a trailer but some of these had seperate fuses for the trailer lights also. If you have a test light check both sides of the two fuses for power [ignition key on] while stepping on the brakes. It should at lest narrow your search a bit.

Jun 08, 2010 | 2006 Chevrolet Silverado 1500 2WD

2 Answers

Where is tail light fuse in 1996 chevrolet silverado pickup


Left of the steering wheel & under the dash is the fuse panel for this. No.9 is for the tail lights, but also for many other lights such as licence lamp/parking lamp/side marker/tail gate/etc...
There is also an under the hood fuse/relay panel, but it does not have the tail light fuse in it.

Jan 29, 2010 | 1996 Chevrolet K1500

1 Answer

Keep blowing a fuse on marker lights and dash lights (same fuse for both)


disconnect marker lights from power re insert fuse if dash stays on search for trouble in marker light circuit possible bad ground or bulb short in socket if dash blows fuse than look under dash for a damaged feed line shorting or ground short

Nov 01, 2009 | 1995 Chevrolet Silverado 2500

1 Answer

Trailer running lamps will not work


Your running lights/marker lights and tail lights are on the same circuit. I all thetruck lights work, the problem is in the plug or plug harness.

Jul 01, 2009 | 2007 Chevrolet Silverado 2500HD

1 Answer

Dashboard Lights will not go on Mazda Pickup B2500 1999


As long as all fuses are good, you need to check the light switch its self. Remove the light switch assembly from the dash. With a 12 volt circuit tester, check the wiring coming out of the switch. The dash lights will be powered along with the side marker lights.

Probe each wire that joins the switch, turning the switch on and off. If you don't have any loss of power here, it can be at the printed circuit board at the dash.
Bill

Nov 19, 2008 | 1999 Mazda Pickup

2 Answers

License Plate Lights


Probably not... For some reason license plate light wiring and sockets are VERY prone to corrosion. Make sure to check the light sockets and try to get to the wiring close to them, your problem is more than likely very close to the lights.

Aug 12, 2008 | 2005 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...