Question about Jeep Wrangler

1 Answer

1995 wrangler door won't open from inside or outside. Took panel off and everything is connected and working so what is causing it not to work?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

The latch itself on the door is probably froze up. spray it with blaster and just let it soak, spray it again and pull the handle lever right where it meets the latch pul back and forth while pushing on the door, spray and repeat

Posted on Oct 08, 2010

  • sooorelaxed Oct 12, 2010

    Found that the mechanism wasn't sliding up all the way to activate the catches to release. Replaced the whole latch mechanism and it still isn't working. Must be something with the door lock as I can now open the door from both sides as long as I don't lock it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Chev Impala - back driverside door won't open from inside or out.


take the panel off the other side door and have a look and compair the two, though there is a small part between the two mechanisms that maybe missing

Jun 11, 2012 | 2006 Chevrolet Impala

1 Answer

97 Mercury Mountaineer driver side door won't open. Outside handle flops around; inside handle won't open door


Try a slim jim first, down the side of the window. Or AAA or locksmith. If no luck, remove the seat first. Find the screws and bolts around the door handle and arm rest. Most Ford's have screws around the outer side of the panel. I don't believe your's does. The panel lifts or pops off. Once the panel is off, you can reach down and open the door. Just a note. I have done some to where the panel came out in pieces.

Mar 14, 2012 | 1997 Mercury Mountaineer

1 Answer

The inside door handle won't open door from inside outside door works fine it's on drivers side 2006 ford fusion selv6


It sounds like the connecting rod popped out of its plastic connector. Pull the door panel off and check both ends of the rod. It must be unhooked at one end or the other.

Feb 29, 2012 | 2006 Ford Fusion

1 Answer

Outside drivers side door will not open the door, inside hadle works just fine


the plastic connection on the inside of the door lever has broke off with old age ,take door panel off and have a good look then come back if you cannot sus it

Jul 27, 2011 | 1995 Volvo 850

1 Answer

My sons's has a 1995 Grand Prix. He can not get in to either front door. He can unlock it from the inside, but can't open from the outside.


You will need to open the door, take the door panel off and reattach the connecting rod that goes to the outside handle.

Mar 19, 2011 | 1995 Pontiac Grand Prix

1 Answer

I have a jeep wrangler 1998 model and i can open from the outside but i cant from the inside


Most likely the rod that connects from the inside lever to the latch has come disconnected. There are small plastic clips that hold the rod to the latch, that may have broke. Would require removing the door panel.

Mar 11, 2010 | 1993 Jeep Wrangler

2 Answers

Door wont open from inside or outside


I have just fixed mine. You have to remove the rear seat then remove the side panel that the door is jammed on.Now looking at the door post you will see two screw heads that are crome in colour. I took a small grinder and took of some of the length of the screw These two screws is what holds the door latch to the body which holds the door closed I then drilled a hole threw the bracket and the screws both screws then broke the bracket loose,pushed the screws in and the door opened.Had to buy a new lock assembly from a wrecking yard and took out the to screws I drilled out.of the same car I got the lock assembly Good Luck It worked for me

Jan 19, 2010 | 1998 Volkswagen Beetle

1 Answer

Drivers side door will not open from the inside but works from the outside.


Open the inside door panel.
There is a big wire that connecting door open lever to the door lock,
The wire could be not in the proper posiiton, and its cause the door cannot open from inside.

Sep 06, 2009 | 1997 Mercury Cougar XR7

1 Answer

1998 Jeep wrangler


Remove the inner door panel and check to make sure that the linkage rod that goes between the outer handle and the latch is connected. It's possible that the plastic end clip broke.

Jul 10, 2009 | 2006 Jeep Wrangler

1 Answer

First my drivers door wouldnt shut but i was able to lock it clos


I have a 2003 jeep sahara and experienced the same problem ..........with mine the lock mechanism was stiff and i had to remove the door panel and lube everything and work the locks and the release handles until they worked freely.
hope this helps!

Jan 09, 2009 | 1998 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...