Question about 2006 Chevrolet Equinox

Open Question

I have a 2006 chevrolet equinox and i need to replace the steady bearing, i would like the procedure

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: replacing a brake light bulb for a 2006 chevrolet equionx

This is almost correct...instead f straight back pull straight out from the side, right light, pull to the right, left bulb, pull to the left.
Worked great.

Posted on Dec 29, 2008

  • 6982 Answers

SOURCE: I'm looking for the procedure to install a front

Hub bolts are around 65-70 foot pounds, axle nut is about 120-130 ft pounds. These are not super-critical. Many at shops are installed using air guns and work just fine. Your main objective is to not have them come loose. If axle nut has a cotter pin, never back off on nut to install. always tighten to get holes for pin aligned.

Posted on Sep 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace bearing in rear drum on a 2006 chevy equinox


You need to use a bearing press to get it out and the new one in. You can try to hammer it out with a piece of pipe if you can catch onto the lip. Sometimes wheel bearings get very stuck and if it scores or damages the drum on the way out you may need to get a new drum. If you don't have the tools you might be able to rent or borrow a press from a shop or auto parts store. If you take it to a brake shop and have them press out the bearing and put in the new one it shouldn't cost that much.

Dec 17, 2014 | 2006 Chevrolet Equinox

1 Answer

2006 chevy equinox makes a roaring noise when acelerating. what could it be?


Its a wheel bearing making that roaring sound now you just have to pin point which wheel its coming from.Have somebody ride in the back seat and set on one side then the other you'll here which side is the loudest then replace that side.These cars are famous for more than one wheel bearing going out so don't be suprise if have to replace more than one.

May 15, 2011 | 2005 Chevrolet Equinox

2 Answers

2005 Equinox has vibration through the steering wheel at 65 miles per hour.


check condition of front tire, also the balance of the fronts 65 is a common speed for tire vibration. do not overlook steering play(tie rods, ball joints) also bent wheel. any noise? could have wheel bearing issue. lots of places, like vip, pepboys, etc. will check front end for free hopeing to sell you a part. not bad deal because you do need "something" even if it is tires balanced.

Aug 20, 2010 | 2005 Chevrolet Equinox

2 Answers

Remove the wheel bearing/hub assembly from the


need detailed pictures of how to change rear wheel bearings on a chevy equinox

Aug 01, 2010 | 2006 Chevrolet Equinox

1 Answer

I'm looking for the procedure to install a front


Hub bolts are around 65-70 foot pounds, axle nut is about 120-130 ft pounds. These are not super-critical. Many at shops are installed using air guns and work just fine. Your main objective is to not have them come loose. If axle nut has a cotter pin, never back off on nut to install. always tighten to get holes for pin aligned.

Sep 15, 2009 | 2006 Chevrolet Equinox

1 Answer

2006 chevy equinox keyless remote programming


from the service manual:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Please go to the nearest GM dealer for assistance

Mar 26, 2009 | 2005 Chevrolet Equinox

1 Answer

2006 EQUINOX


iddle pulleys. o beltso alternator bearing

Jan 12, 2009 | 2006 Chevrolet Equinox

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...