Question about BMW 1 Series

1 Answer

Need a fuse schematic for tail light brake light fuse is okay,directional light is okay can't tell which fuse to replace for tail light. thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

I don't know the year or model vehicle we are speaking of. If you suspect a fuse is blown and you are not sure which one, you can tell by looking at the top of the fuse to see if it is still making a connection. If it is making a connection, you know the fuse is good. Check the sockets at the rear of the vehicle and make sure the bulbs are good and the connector is not corroded.

Posted on Oct 08, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Brake lights work but tail lights out - Help! (Thanks)

Tail lights are on a different fuse than the headlights. If you already checked the bulbs then check the fuses. They're under the dash, on the left side of the driver.
Hope this helps.

Mar 26, 2015 | 2011 Honda Pilot EX-L

1 Answer

No dash or tail lights, but headlights, turn signals, high beams and brake lights work, all fuses okay?

It could be the headlight switch. Did you check the fuses with a test light? If so then check the appropriate terminals coming off the headlight switch. Look at the schematic for this circuit to find the colour codes coming from the switch.

Mar 31, 2014 | 2003 Pontiac Sunfire

1 Answer

2004 Tacoma - tail lights don't work but brake lights and reverse lights do work. Bulbs look ok. fuse looks okay. Wiring looks ok. Could it be a relay or is there something else to check? Than

try cheaking the light switch its self may be faulty not normally a relay for but it shold tell you on fuse box which relay runs light ign ect

Sep 21, 2012 | 2007 Toyota Tacoma

2 Answers

Back turn signals aand brake lights are out, but the the tail light s work. What does this mean and how can i fix it. i checked the fuses and did not see any burnt out

Because the brake and tail(or running lights) are two different circuits. You should find that the stop and turn-signals have their own fuse. Even if the fuse looks okay it may not be. But if you replace the fuse and it still doesn't work try the four-way flasher. If the lights in the rear flash and the brake lights still don't work. Your problem then becomes a power distribution problem. If you know about test lights and troubleshooting this type of problem check for power at the connections for the stop/turn-signal fuse. The power side of the fuse should be the one that has two wires hooked up to it.

Jan 04, 2011 | 2005 Dodge Caravan

1 Answer

I have an 1986 camaro iroc. i have brake lights and turn signals but no tail lights or dash lights, i have power to the tail light replaced both bulbs. i cant seem to find the fuse . does anyone know where...

Bulbs work just like a fuse. When old they just short out like a weak fuse bowing out. Since the lights do not have a fuse you need to replace the headlamp switch for this switch controls the tail lamps. The directionals are controlled by the directional switch, and the brakes are controlled by a brake light switch. Those have fuses for they have switches. Headlight switches do not have a fuse

Apr 15, 2010 | 1986 Chevrolet Camaro

1 Answer

90 nissan pick up have brake lights, blinkers, no tail lights.. is there a fuse that might need to be replaced

tail lights and dash lights usually operate on a single fuse so yes, check the fuse panel and it will tell you which one to replace. Good luck

Nov 20, 2009 | Nissan Pickup Cars & Trucks

3 Answers

Tail lights work, but not one brake light when braking at night.

2001 jeep grand cherokee left brake does not work period. I replaced bulb to no avail. the entire tail lamp assembly looked brown as though it heated up. However, the tail light, signal light and back-up lights still work. Please help.

Sep 03, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Need fuse schematic

if the fuse was blown the stop lights on both sides would be inop, also if the stop light circuit were dead u would be unable to get the trans out of park, use a 12 volt test light and test the brake light switch at the top of the brake pedal, u can buy a test light from Autozone, kragen and others for about $5 US. If the system has power cjheck the bulb socket it may be defective, use the 12 volt test light while someone pushes the brake pedal. let me know what u find and i will give u further assistance as ness.

Dec 31, 2008 | 1999 Dodge Durango

4 Answers

2005 Corolla LE brake lights not working

to ss1957, i have exactly the same problem as yours. At first i thought the bulbs of both side are okay because the filaments (there's two on each) are intact. It turned out that they're not. The brake lights came back as soon as I replaced the bulbs.

Nov 16, 2008 | 2005 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers


Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides