Question about 2003 Ford Mustang

1 Answer

There is no power to the a/c clutch. but have power from the pressure switch. Is there a fuse or is it all connected to the control module located in the right front fender?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 8,215 Answers

It all goes thru the PCM, but the clutch has it's own 20 amp fuse. Check in the engine compartment relay box by the battery for this fuse.There is no power to - f25024c.gif

Posted on Oct 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How dose the 4x4 get it's power on a 1998 f250


How Does .
Well , the 4X4 mode switch on the instrument panel get Power from the GEM - genaric electronic moduel . The transfer case shift module get's power from fuse #17 30amp located in the power distribution box . The transfer case electric clutch relay gets power from fuse # 23 10amp located in the junction box fuse / relay panel . System controlled by the GEM module . Could have DTC'S - diagnostic trouble codes stored in the GEM

Mar 04, 2017 | Ford F-250 Cars & Trucks

1 Answer

Air condition clutch do not operate


check the pressure in the system as too high and no gas will not let the clutch work . Check fuse and connection to the clutch coil . Check that the ac switch and the blower motor switch is working or if you have a module control then check that it is operational.

Mar 01, 2014 | 1988 Chevrolet C1500

1 Answer

A C compressor want come on, no fire to the compressor nor low pressure switch


Your A/C compressor clutch is controlled by the Electronic Climate Control Module (ECCM) via the compressor clutch relay. The low pressure switch only completes the circuit between fuse #A3 in the engine compartment fuse block to the high pressure switch, which in turn, completes the circuit to the control (or primary) side of the clutch relay. It does not provide direct power for your clutch. The primary ground side of the relay is controlled By the Powertrain Control Module (PCM).

If there is no power on either terminal of the low pressure switch, it can only be a blown 10 Amp fuse #A3 or a broken wire between the fuse and the low pressure switch. If the fuse is blown, replacing the fuse will not fix your car unless you find out and correct the reason why the fuse blew.

If this is not the problem, the only EFFECTIVE way to diagnose this system is to scan your computer system for fault codes and diagnose it accordingly.

Please also review these articles:
What Else Could Be Wrong?

Where's The Fuse?

Jul 18, 2011 | 1994 Cadillac DeVille

1 Answer

I have a 02 lincoln ls . the air conditiong is not working . i took it to a local shop they check the compressor, fuses, relays, pressure swithches, all is checcking out good. They jump the compressor...


YOU COULD HAVE OPEN OR SHORT IN THE BLACK YELLOW WIRE GOING TO AC COMPRESSOR CYCLING PRESSURE SWITCH. CHECK FOR A SHORT OR OPEN IN RED YELLOW WIRES AT THE AC PRESSURE CUTOFF SWITCH. USE VOLT METER AND CHECK FOR VOLTAGE AT BOTH SWITCHES. PROBLEM COULD BE IN THE EATC MODULE THAT SEND POWER TO PURPLE WIRE THAT FEEDS THE AC PRESSURE CUTOFF SWITCH AND AC CLUTCH CYCLING PRESSURE SWITCH THEN FEEDS THE AC COMPRESSOR CLUTCH SOLENOID.

Jun 24, 2011 | 2002 Lincoln LS

1 Answer

On my 2007 Dodge 2500 diesal the AC clutch will not engage. I found the fuse box under the hood and there is only one 10 amp fuse that says hvac. so where is the clutch relay or fuse? Which big fuse...


there is no relay in that box that is called the tipm or totally integrated power module. that module is controlled by a computer and should be checked with a scanner to see if you have a code for the a/c. i m having the same problem i have been told it could be low freon but can not get the clutch to engage to check the high and low pressure. Also read where it may be the diode in the clutch on the ac compressor if you have a multimeter probe the compressor a good compressor will read somewhere between 3.5 and 4.0 anything else and clutch needs to be replaced. other possibilities may be the high or low pressure switch on the line. on myh 2006 2500 diesel it is located near the plug for the compressor on bottom side of motor. hope this helps.

Aug 22, 2010 | 2006 Dodge Ram 2500

2 Answers

A/c has full freon but the compressor clutch wont engage. i have found that the plug going into the compressor is not getting any power. what could be the problem?


On the low pressure line of the ac you have a pressure switch which allows the compressor to come on once a certain pressure is reached, and it will cut the compressor off if the pressure is too high or too low. Look at your ac hose and find the switch *you will see wires connected to it* you may need to replace this switch. You can use a test light to see if you are getting power to the switch. You should check you fuses, and the ac relay witch is usually in a black plastic box under the hood.

Aug 10, 2010 | 1997 Ford Crown Victoria

3 Answers

Have no power to the ac compressor. all fuses and


SOUND LIKE AC COMPRESSOR CLUTCH COIL IS OPEN.ITS GETTING POWER YOU HAVE A OPEN COIL CIRCUIT.

May 27, 2010 | 2002 GMC Yukon Denali

2 Answers

I need a fuse box diagram for a 2003 Ford Explorer Sport


I believe that this is what you are looking for.....
Fuse and relay locations--2nd generation power distribution box Layout- I think this is a good sticky candidate--

attachment.php?attachmentid=29397&d=1133918512

Fuses are listed here

* = maxi fuse

1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay

6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay

mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator


Interior fuse panel (mini fuses)

1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**

15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

Oct 10, 2009 | 2003 Ford Explorer Sport

1 Answer

NO POWER TO AC COMP


Fuse #5 is for your ac.

On the Hi/Low pressure switch conection Terminal 1 and 2 are for AC clutch bridge them briefly to see if clutch engage if so system is low on refrigerent.

If you get cold air its more then likely Hi/Low switch is bad.

Note engine must be running and ac fan in on position.

Good luck

May 20, 2009 | 2000 Volkswagen Jetta TDI

2 Answers

Diagram of fuse panel under dashboard


2003 Excusion, V10, 2wd, Eddie Bauer

I had a hardtimefinding this informaton, hope it helps.

fuses
Fuse link
cartridge
2A Grey Grey — — —
3A Violet Violet — — —
4A Pink Pink — — —
5A Tan Tan — — —
7.5A Brown Brown — — —
10A Red Red — — —
15A Blue Blue — — —
20A Yellow Yellow Yellow Blue Blue
25A Natural Natural — — —
30A Green Green Green Pink Pink
40A — — Orange Green Green
50A — — Red Red Red
60A — — Blue — Yellow
70A — — Tan — Brown
80A — — Natural — Black
Passenger compartment fuse panel / power distribution box
The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
Roadside Emergencies
To remove the fuse panel cover,
turn the panel fasteners
counterclockwise.
To remove a fuse use the fuse puller
tool provided on the fuse panel
cover.

The fuses are coded as follows.
Roadside Emergencies
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse Panel
Description
1 15A* Adjustable pedals
2 20A* Power point -floor console
3 20A* Power point – 3rd row
4 20A* Power point -instrument panel
20A* Power point -right rear quarter
6 20A* Trailer tow turn/stop relay
7 30A* High beam headlamps / Flash to pass
8 — Not used
9 20A* Heated mirrors
10A* A/C clutch
11 20A* Radio (main)
12 20A* Cigar lighter / OBD II
13 5A* Power mirrors/switches
14 15A* Daytime running lamps
10A* Driver’s seat module memory
16 15A* Rear seat controller
17 15A* Exterior lamps
18 20A* Turn lamps/Brake on-off switch (high)
19 10A* Body security module/4x4 module
— Not used
21 25A* Rear wiper motor
22 20A* Engine control
23 20A* Engine control
24 15A* Air suspension
10A* 4-Wheel Anti-Lock Brake System
(4WABS) module
26 10A* Airbags
27 15A* Ignition switch Run feed
28 10A* EATC module module/Front blower relay
coil
29 10A* Customer access
Roadside Emergencies
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse Panel
Description
30 15A* Highbeam headlamps
31 15A* Clutch interlock switch
32 5A* Radio (start)
33 15A* Front wiper
34 10A* Brake on-off switch
35 10A* Instrument cluster
36 10A* PCM Keep-Alive
37 15A* Horn
38 20A* Trailer tow park lamps and backup lamps
39 — Not used
40 20A* Fuel pump
41 10A* Instrument cluster
42 15A* Delayed accessory
43 10A* Fog lamps
44 10A* PATS module, transceiver
45 10A* Ignition switch Run/ Start feed
46 10A* Left-hand lowbeam
47 10A* Right-hand lowbeam
48 10A* Rear wiper motor
101 30A** Trailer tow electric brake
102 30A** Door locks/Body security module
103 50A** Ignition switch
104 40A** Heated backlite
105 30A** Injector driver module
106 30A** Front wiper main
107 40A** Front blower motor
108 40A** Auxiliary blower motor
109 30A** Heated seats
110 50A** Ignition switch
111 30A** 4WD/Shift on the fly
112 30A** Left-hand power seats

Roadside Emergencies
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse Panel
Description
113 30A** Starter motor
114 30A** Right-hand power seats
115 20A** Trailer tow battery charge
116 30A** Ignition switch
601 30A CB Door window motors
602 60A** 4-Wheel Anti-Lock Brake System
(4WABS) module
210 — Not used
211 — Not used
212 — Not used
301 — Front blower motor relay
302 — Powertrain (EEC) relay
303 — Injector driver module relay (Diesel
only)
304 — Heated backlite relay
305 — Trailer tow battery charge relay
306 — Delayed accessory relay
307 — Starter relay
* Mini Fuses ** Maxi Fuses

Jan 27, 2009 | 2002 Ford Excursion

Not finding what you are looking for?
2003 Ford Mustang Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...