Question about 1996 Nissan Pickup

1 Answer

What do i do to get new belt on - 1996 Nissan Pickup

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 14,036 Answers

FOR THE 3.0L ENGINE IF YOU REPLACE AC BELT LOOSEN TOP IDLER PULLEY CENTER BOLT. IF YOU REPLACING ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTMENT BOLT AND PIVOT BOLT.IF REPLACING POWER STEERING PUMP BELT LOOSEN POWER STEERING PUMP ADJUSTMENT BOLT AND MOUNTING BOLTS.****** FOR THE 2.4L ENGINE TO REMOVE POWER STEERING BELT LOOSEN TOP IDLER PULLEY.FOR ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTER BOLT, PIVOT AND MOUNTING BOLTS.FOR AC COMPRESSOR LOOSEN LOWER IDLER PULLEY.

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My new belt wont stay tight and i have all new pulleys, whats my problem


Recheck the routing of the belt because if you go the wrong way around a pulley the belt will be too long. Remember that with multi- groove pulleys the back of the belt goes around the idler pulley and the grooves go in the groves of the pulleys to be driven

Feb 19, 2014 | GMC Cars & Trucks

1 Answer

Replace fan belts


When replacing fan belts, route the new belt through the pulleys so that it uses the exact same path as the old belt. You may need to loosen the belt tensioner a little bit more in order to slip the new belt onto the final pulley.-------------------------------------------------------------------------
New UPA USB Programmer

Apr 20, 2013 | Cars & Trucks

1 Answer

Does anybody have a diagram and/or instructions for changing the serpentine belt on a 1998 celica?



REMOVAL & INSTALLATION

See Figures 12, 13, 14, 15 and 16
If a belt must be replaced, the driven unit must be loosened and moved to its extreme loosest position, generally by moving it toward the center of the motor. After removing the old belt, check the pulleys for dirt or built-up material which could affect belt contact. Carefully install the new belt, remembering that it is new and unused - it may appear to be just a little too small to fit over the pulley flanges. Fit the belt over the largest pulley (usually the crankshaft pulley at the bottom center of the motor) first, then work on the smaller one(s). Gentle pressure in the direction of rotation is helpful. Some belts run around a third or idler pulley, which acts as an additional pivot in the belt's path. It may be possible to loosen the idler pulley as well as the main component, making your job much easier. Depending on which belt(s) you are changing, it may be necessary to loosen or remove other interfering belts to get at the one(s) you want.


0900c15280074b92.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 12: On some components a front pulley bolt must be loosened ... .


0900c15280074b93.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 13: ... then the upper bolt so you can ...


0900c15280074b94.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 14: ... lift up and remove the drive belt


0900c15280074b95.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 15: Once the front belt is removed you can access the other belts in need of replacement
When buying replacement belts, remember that the fit is critical according to the length of the belt, the width of the belt, the depth of the belt and the angle or profile of the V shape (always match up old belt with new belt if possible). The belt shape should exactly match the shape of the pulley; belts that are not an exact match can cause noise, slippage and premature failure.
After the new belt is installed, draw tension on it by moving the driven unit away from the motor and tighten its mounting bolts. This is sometimes a three- or four-handed job; you may find an assistant helpful. Make sure that all the bolts you loosened get retightened and that any other loosened belts also have the correct tension. A new belt can be expected to stretch a bit after installation so be prepared to re-adjust your new belt.
After installing a new belt, run the engine for about 5 minutes and then recheck the belt tension.


0900c15280074b96.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 16: Make sure the belt is aligned on the pulley correctly

Oct 26, 2012 | 1998 Toyota Celica

1 Answer

How do I replace the serpentine belt on a 1999 Kia Sephia?


1.8L Engine
  1. Using a belt tension gauge, measure the drive belt tension and compare with the following specifications:
    1. Alternator belt (new): 86-103 lbs. (383-461 N)
    2. Alternator belt (used): 68-86 lbs. (304-383 N)
    3. A/C compressor and power steering pump belt (new): 110-132 lbs (491-589 N)
    4. A/C compressor and power steering pump belt (used): 95-110 lbs. (422-491 N)

      zjlimited_1999.jpg
      Fig. Using a tension gauge to measure the alternator belt tension - 1.8L engines (click HERE for zoom)


  2. Using the deflection method, apply moderate pressure (about 22 lbs) halfway between the pulleys, and compare with the following specifications.
    1. Alternator belt (new): 0.31-0.35 in. (8-9mm)
    2. Alternator belt (used): 0.35-0.39 in. (9-10mm)
    3. A/C compressor and power steering pump belt (new): 0.31-0.35 in. (8-9mm)
    4. A/C compressor and power steering pump belt (used): 0.35-0.39 in. (9-10mm)
  3. If the specifications fall outside the ranges given, adjust the belt as follows:
    1. Loosen the alternator mounting bolt and adjusting bolt.
    2. Adjust the alternator to get the specified belt deflection.
    3. Tighten the bolts, then recheck the tension.

      zjlimited_2000.jpg
      Fig. Adjusting the alternator belt-1.8L engines

Hope helps.

Oct 09, 2011 | 1999 Kia Sephia

1 Answer

How do I replace the serpentine belt?


1.8L Engine
  1. Using a belt tension gauge, measure the drive belt tension and compare with the following specifications:
    1. Alternator belt (new): 86-103 lbs. (383-461 N)
    2. Alternator belt (used): 68-86 lbs. (304-383 N)
    3. A/C compressor and power steering pump belt (new): 110-132 lbs (491-589 N)
    4. A/C compressor and power steering pump belt (used): 95-110 lbs. (422-491 N)

      zjlimited_1999.jpg

      Fig. Using a tension gauge to measure the alternator belt tension - 1.8L engines (click image for zoom)


  2. Using the deflection method, apply moderate pressure (about 22 lbs) halfway between the pulleys, and compare with the following specifications.
    1. Alternator belt (new): 0.31-0.35 in. (8-9mm)
    2. Alternator belt (used): 0.35-0.39 in. (9-10mm)
    3. A/C compressor and power steering pump belt (new): 0.31-0.35 in. (8-9mm)
    4. A/C compressor and power steering pump belt (used): 0.35-0.39 in. (9-10mm)
  3. If the specifications fall outside the ranges given, adjust the belt as follows:
    1. Loosen the alternator mounting bolt and adjusting bolt.
    2. Adjust the alternator to get the specified belt deflection.
    3. Tighten the bolts, then recheck the tension.

      zjlimited_2000.jpg

      Fig. Adjusting the alternator belt-1.8L engines


Hope helps.

Oct 09, 2011 | 1999 Kia Sephia

1 Answer

New Serpentine Belt Causes Squeeling. Added gobs of belt dressing, still squeels. Old belt was only half a belt--totally worn out. New belt is therefore tighter and putting more force on pulleys. Do I...


Take off the new belt ... toss it ... get a new belt ... before you put it on ... clean all the pulleys twice ... final cleaning should be alcohol.

Oct 27, 2010 | 2003 Mini Cooper

2 Answers

Change serpentine belt on 06 sienna


  1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
  2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
  3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
  4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
  5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
  6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
  7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
  8. 8 Remove the wrench and close the hood.
Thank you and good luck,
Lee

Aug 26, 2010 | 2006 Toyota Sienna

1 Answer

Retractable seat belt wont close


Is this a NEW seat belt?  Or a junkyard part... Per the Toyota 1988 Repair Manual - the belt is allowed to be pulled out at a tile of 15 degrees or less; and cannot be pulled out at over 45 degrees of tilt.

Your problem is the belt is not retracting.  The manual states to replace the assembly.  It also states: "Whenver installing a new belt assembly, verify proper operation before installation."

If a new part does not have proper operation; have it replaced. If this is a 'used'  new part - get a NEW seat belt.

Apr 07, 2009 | 1988 Toyota Camry

1 Answer

Installing new serpentine belt


i would put a new belt on and when your done try to twist the belt if it twists more than half of the way the tesioner is worn out if it was me i would probally replace it just to be safe because it is a 93 and a turbo d which has more vibration which can wear out the spring

Dec 20, 2008 | 1993 Ford F250

1 Answer

Changing belts


Air conditioning system Drive Belt (INSPECTION) Deflection : Used belt : 6.0~7.0mm (0.24~0.28 in.) New belt : 5.0~5.5mm (0.20~0.22 in.)
6f4a2c5.gif NOTE These items when adjusting belt tension : If there are cracks or any damage evident on the belt, replace it with a new one. "Used belt" means a belt which has been used for five minutes or more. "New belt" means a belt which has been used for less than five minutes.

ADJUSTMENT 1. Loosen the tension mounting bolt(B). 2. Turn the adjusting bolt(C) to obtain the proper belt tension, then retighten the mounting bolt. 3. Recheck the deflection of the drive belt.

Aug 17, 2008 | 2005 Hyundai Elantra

Not finding what you are looking for?
1996 Nissan Pickup Logo

674 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...