Question about 1999 Chevrolet 3500

1 Answer

My right and left brake lights arn't working, just the top brake light works. But my lights still work, it's just when I press the brake, the brake lights don't come on?????

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

It is the turn signal switch. To change it, you have to pull the steering wheel. You will need a puller tool and a compression tool to get the componets out of the column and to reinstall. Beware of the airbag, it can cause serious injury.

Posted on Oct 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My right and left brake lights arn't working, just the top brake light works. But my lights still work, it's just when I press the brake, the brake lights don't come on?????


check brake light relay in relay box under hood.

Please see my tip at http://www.fixya.com/cars/r6022358-relay_check . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Oct 07, 2010 | 1999 Chevrolet Express

1 Answer

Brake light dont work. 2006 chevy truck, 4.8L 2wd


Some of these had two fuses for brake lights. One for the top/center stop lamp and another for the rear left and right brake lights. Usually one said "stop" and the other said "brake" and one was in the underhood panel while the other was in the dash fuse panel. It's not uncommon to blow a brake light fuse [LR and RR] if you tow a trailer but some of these had seperate fuses for the trailer lights also. If you have a test light check both sides of the two fuses for power [ignition key on] while stepping on the brakes. It should at lest narrow your search a bit.

Jun 08, 2010 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

1999 GMC Suburban, K1500 4WD. Top brake light bar


third light is different circuit. saftey reason check fuses grounds wires

Oct 10, 2009 | 1999 GMC Suburban

1 Answer

Brake lights not working


check the fusse for the brake ligt and the righht and left rear lights. also check the brake switch white is located underneath the dash board an over the brake pedal

Jul 28, 2009 | 2002 Chevrolet TrailBlazer

2 Answers

Right brake light out; tail light works fine


most rear tail lights and turn/stop lights are the same dual filiment bulb. it is possible for your tail light to work and your brake light not to and still have a bad bulb. I would check the bulb first, your brake light works on the left yes? this would mean that the fuse is fine

Mar 31, 2009 | 2006 Dodge Stratus

1 Answer

Why would my center top brake light work but the left and right


i have replaced many of these. it is the multifunction switch under steering wheel cover.the third brake light is on different circuit .so replace muti switch and you will fix your problem thanks please rate this answer

Feb 01, 2009 | 2000 GMC Jimmy

1 Answer

Right tail light not working when pressing brake w/ lights on.


There should be at least 2 bulbs in the light assembly. One light is the light that is on when you turn on your headlights with out the brake pressed, the other light only lights up while you press on the brake. Make sure you are replacing the correct bulb. You may have been replacing the bulb that stays on. Your lights may be set up to turn off the light that stays on when the headlights are on while pressing the brakes.

Nov 13, 2008 | 1993 Toyota Camry V6

2 Answers

2000 Mazda 626 brake lights


try brake light switch on top of brake peddle

Sep 13, 2008 | 2000 Mazda 626

2 Answers

Signal and brake lights


Igot the same problem on left side.The problem was the convertor for the trailler plug.

Jul 16, 2008 | 2005 Chevrolet Colorado

Not finding what you are looking for?
1999 Chevrolet 3500 Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...