At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Usually the washer pump is located in the bottom side of the washer tank . It is easily accessed by removing the tank from the car first so it can be replaced.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
usaully located at the bottom of washer tank where you fill the window washer fluid some have fuses in the fuse box others the wires corrode or break at the pump or pump burnt
The pump motor is located in the washer fluid reservoir. It simply pushes into a rubber grommet in the lower end of the reservoir. It looks like the picture below.
Your washer pump and resorvoir are located inside the drivers fender. You may need to take off the wheel to have better acces but, you will need to remove the plastic fender trim and you will see the resorvoir located inside. The pumps are attached to the resorvoir.
Open the hood and locate your washer fluid reservoir. This is normally located on the driver's side of the engine bay.Locate the fluid pump. It should be underneath the reservoir.Remove the bolts holding the pump to the vehicle's frame.Remove the electo the pump.Install the new washer pump. Installation is the reverse of removal.vote for me if it helps you and you can write a testimonial also.
The windshield washer pump is part of the windshield wash reservior.
There is an electrical connector located on the bottom of the reservior.
That is the pump .
If the pump is not in the reservior. I would just trace the washer fluid lines from the sprayer on the vehicle back to the pump. The lines just might lead back to the reservior for the windshield wash solution. Then you will have confirmed the pump is in the reservior.
You may have to get a new reservior. The pump might not be seperate item, I am not 100% sure on that.
I also would double check the fuses and any relays related to the washer pump.
Finally, I would check the washer switch if you replace the pump and still is not working .
×