Question about 2000 Ford Windstar

1 Answer

My ABS light is on and the ABS keeps going off when I push my brakes. Can I just change the ABS fuse to start? I didn't want to take it to a mecanic to be charged $50. to check it out only to find out it's a bad fuse.

Posted by on


1 Answer

You should pay about $80.00 to diagnose the ABS System failure
More to repair if there is a problem

Fuses don't fix anything
Fuses don't get bad
Fuses protect circuits, from overheating, due to high current loads or a short to ground.
If a fuse blows,replacing it, just cause another to blow,until problem is corrected

Posted on Oct 08, 2010


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: My ABS light is on and the ABS keeps going off

It is not going to be a fuse. You need to get it checked out. If the fuse were bad the light would be on and it would not work at all.

Posted on Oct 07, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine starts but does not go into gear brake light , abs light , engine lite on Radio, ac/heater, clock, cig lighter, door locks, brake lights, etc not working

Well, check if you have brake lights to start with? If you dont have brake lights, it is possibly a brake light switch under the brake pedal or a stop fuse blown. ( with brake switch malfunctioning, this could set ur check engine light and also ur brake and abs light. Check this and get back to me. By the sounds of the other accessories not working, check your 10 amp guage fuse which i am not quite sure, could be under the hood or in the cabin. keep me updated.

Dec 10, 2013 | 2012 Toyota Tundra Tundra Crew Cab Pickup...

1 Answer

Brake pedal loosing pressure

Honda had two brake reservoirs one on the normal brake master cylinder the other on the ABS module. If abs fuse has no power the module has no power. that power comes from the main fuses in underhood fuse box. the abs system is supplement system to normal braking system loss of brake pedal is a air problem or drum brake adjustment problem or a loose wheel bearing pushing the caliper piston back into caliper requiring more fluid to get brake to work causing a low pedal.

Nov 12, 2013 | 1995 Honda Accord

1 Answer

Abs light and the brake light come on when starting the car and never turn off. Mecanic says the brakes are fine. What could be the problem?

The abs system does a self check every time you start your vehicle. If something fails during the self check the ABS light will stay on and the brake light will turn on as well. Have the ABS scanned to find out what trouble code is stored. The usual cause for this to happen is a bad wheel speed sensor. If the stored code is for a speed sensor it will tell you which wheel to look at.

I’m happy to assist further over the phone at

Sep 28, 2010 | 2002 Chevrolet Cavalier Coupe

2 Answers

Will not come out of Park,and the ABS light is flashing.

check to see if you have brake lights, if not you will need a brake light switch. if the brake light switch goes bad it will not let the shift interlock selenoid to release.

Apr 26, 2010 | 1996 Ford F350 Crew Cab

3 Answers

Parking brake and abs light stays on, service 4wd message display and a/c wont turn on

check your fuses. check your fuses. check under the hood on the top row there will be a 60amp fuse i beleive its the second one from the right it controls the abs system its blown. your probably gonna need a new altenator.

Jun 24, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

Fixing brakes

Try bleading the brakes, sounds like you have in them. Than the ABS light should go out & you shouldn't have to worry about the fuses.

Jun 02, 2009 | 1993 Plymouth Voyager

1 Answer

ABS light, gear won't change

Sounds like he may have blown the brake light fuse while messing with the bulb. Make sure the correct bulb is installed. It should be a double filament bulb not a single.The wrong bulb will blow the fuse.
The shift lock solenoid uses the brake light switch to unlock.
The ABS code will be for the brake light system and will clear itself when the power is restored to the brake light switch.

Apr 05, 2009 | 2008 Toyota Sienna

1 Answer

Abs light/brake light/traction light.keep come on and going off why iam driving.this start after I had the tranmission fix. 01 cadillac deville

hello there

You neeed to replace the ABS fuse located in the fuse box. Sound like it might be just loose but I always change them anyway.

Hope this helps. Please don't forget to rate me.


Mar 15, 2009 | 2001 Cadillac DeVille

1 Answer

Abs relay

Good Day,

The easiest solution is to locate the abs fuse in the fuse box. Remove that fuse and ABS is now disabled(this will trip you abs light), brakes will function normal but keep in mind you will lock the wheels up under heavy braking. Possible cause are bad abs sensors, or bad abs module. If you don't mind no abs then problem solved, otherwise take it to a shop and have a code pulled from the abs module to diagnose further.

Hope this helps and Good Luck

Jun 30, 2008 | 2001 Chevrolet Suburban

Not finding what you are looking for?
2000 Ford Windstar Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides