Question about 2005 Nissan Altima

Open Question

Hood on 2005 altama will not open how do you get to the latch .will the grill come out ?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chain saw
  • 94 Answers

SOURCE: need to remove front grill to open the hood?????

JACK UP YOUR CAR AND REMOVE THE RETAINING BOLTS THAT HOLD ON THE PLASTIC UNDER TRAY.AND NOW YOU CAN GET AT THE LOCKING MECHANISM ITS SELF..............(NO DAMAGE)...........

Posted on Apr 09, 2009

bmw_tech_38
  • 113 Answers

SOURCE: Hood Won't Open, and Lever Broke

Hi viper852004 , the only way you can do this is to remove the front grills and then you will be able to see the 2 sprung bonnet pegs, you will need to loosen the adjusting nut where it screws into the hood and unscrew it until it becomes unattatched from the hood, do this for both pegs and then you should be able to release the hood to fix the problem. the pegs will need to be reinstalled before driving the car as the hood will not close, hope this is of some help, regards mark.

Posted on Jan 26, 2009

  • 3 Answers

SOURCE: My hood latch is broken

If the cable link to the latch is rusty or broken you have to take the front grid down. It's relatively easy. It's held there by plastic fasteners. Then reach for the latch with you hand, or the leftover broken cable. Pull it, it should release the first latch, than you just have to get to the security latch, like you usually do to open the hood.

Posted on Feb 17, 2009

  • 2 Answers

SOURCE: hood latch 93 sentra, cable is slack like it broken

Cables get stretched over time. Should be an easy fix just visit your local salvage yard.

Posted on Mar 07, 2009

  • 98 Answers

SOURCE: hood latch 93 sentra, cable is slack like it broken

the hood latch is stuck.U can try tapping on the hood by the latch while slowly pulling up on the hood.Or u can climb under the car and push the lock lever back and that will pop the hood

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hood safety latch want release the hood so it can open. How can I get around this


You will need to use a long tool and some spray lube to get it to pop. Have some one hold up on the interior latch while you try 'slapping down' on the front of the hood with your hands and if that doesn't work, try the spray through the grill area. Use the long tool with a flashlight to try pushing the latch from the grill area. Good luck!

Sep 13, 2015 | 2005 Chrysler Pacifica

1 Answer

Open hood latch not connected to the opening cable


You'll have to remove the 2 8 mm bolts either through the grill or underneath.not easy but can be done

Apr 27, 2014 | 2005 Mercury Mariner Premier

1 Answer

Hood wont open


try to peek/sneek thru the grille or under rad sport to push latch

Nov 05, 2013 | 2005 Chevrolet Cavalier

1 Answer

Hood wont open 2005 cavalier


Is the cable broke? If not, try having someone push up and down on the hood (Gently) while you pull the hood release. If it does open, get out the WD-40 and lube the latch and cable.
If not or the cable is broken, you might try "fishing" a coat hangar wire with a loop in one end between the grill and radiator to hook the hood release latch where the cable attaches. Pull the wire and it MAY open. Good Luck... ....

Nov 05, 2013 | Chevrolet Cars & Trucks

1 Answer

I own a 1997 e320 Mercedes. My latch wire that opens my hood was cut severing the connection to my two hood latches. My hood release lever in my car doesn't work nor my release lever in my grill. My...


only way i can think of is to remove the center grill so you can get at the mechanism but it means braking it im afraid you cannot get at it any other way

Sep 09, 2011 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

How to open the hood


After pulling latch under dash, it should just barely pop open. Use fingertips and lift on front edge of hood. Then use lever located in middle of the grill to release completely. Then, most important, lubricate all rubber moldings along hood that come in contact with body sections, and then lube the spring latch and clean the loop on underside of hood. It will still always be very tight to open. Just a design flaw I think.

Aug 23, 2011 | 2005 Toyota Tacoma

1 Answer

The hood will not open on my 2002 subaru legacy. can you help me?


try having someone hold the hood release open while you lift the hood. sometimes if you push down first then up it will release. If there is no way to get it open you might try to see the bolts through the grille to unbolt the hood latch through the
grille. If you cant get to it that way try to come from the bottom. Sometimes you can put a long screwdriver through the grille opening and reach the hood latch where the cable hooks and pry it the same way the cable would pull it. If you cant get it through the grille you will have to come from the bottom with a long screw driver to reach the hood latch at the radiator support and find the latch release action. you will have to remove some splash covers under the rediator support.

Dec 15, 2010 | 2002 Subaru Legacy

1 Answer

Broken hood latch cable S-10 chevrolet 2000 can not open hood


The best way to gain access is to remove the grille. Look in the holes of the grille and you'll see screws that hold the grille in place. Unscrew these and pull the grille out, then you can gain access to the bottom side of the hood latch with a screw driver to pop it open.
When replacing the release cable, be sure to grease the wear points at the latch and where the cable connects.

Jan 01, 2010 | 2000 Chevrolet S-10

1 Answer

Need to remove front grill to open the hood?????


JACK UP YOUR CAR AND REMOVE THE RETAINING BOLTS THAT HOLD ON THE PLASTIC UNDER TRAY.AND NOW YOU CAN GET AT THE LOCKING MECHANISM ITS SELF..............(NO DAMAGE)...........

Apr 09, 2009 | 2005 Audi A4

Not finding what you are looking for?
2005 Nissan Altima Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...