Question about 2001 Isuzu Trooper

1 Answer

Check engine and trans light are on a 2001 Isuzu trooper 2 X 4, I took it to auto zone the diagnostic check showed loose band on transmission I know that I need a torque wrench to adjust I need to know where this adjustment bolt is and how much torque to use. Thanks a million

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The band adjustment in not a torque adjustment. Drop the main pan on the transmission. You will see the valve body with filter on it. At the rear drivers side you will see a round dome piece with a flat flange with four bolts in it. Remove the bolts and take this cover off. Now you will see a round piston with an adjustment screw in it. Break the jam nut loose and tighten the allen bolt in until tight. Back off five complete turns and reset jam nut. When you have the pan off, take note of how much clutch material is in it. If you have a lot it could be time to replace the clutches. Also it is a good idea to put in a new filter if you are in there. Good luck

Posted on Feb 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2002 Isuzu trooper 4X4, on a dashboard 2 lights are on, Engine Check and CHECK TRANS blinking every 2 seconds. Car itself operates very well, shifts gears etc. when I drive around town it works...


Have you checked for Diagnostic Fault Codes yet? Have your local auto parts store check for codes if you don't have access to a code reader. New Bluetooth OBD readers (ELM327) that pairs with your smartphone or laptop and a free app. (Called "Torque") Great reader for under $20 in most cases. Start there first. Is there a Temp Gauge for coolant? If so.......what is the operating temp doing during those highway trips? If the coolant is overheating, it may be heating the transmission too.
1. Check for codes.
2. Have cooling system checked, cleaned, flushed, and new coolant installed.

Oct 05, 2013 | 2002 Isuzu Axiom

1 Answer

2001 Isuzu Trooper 4wd automatic trans. It will shift ou of 1st at about 20 mph into 2nd then loses power, rpm's drop until it slows to about 10mph then down shifts back to 1st. Any ideas why?


Sounds to me that your transmission is put itself into what is call (Limp Mode). This happens when the transmission fluid in the trans hydraulic valve body located on the bottom and in the trans pan are not within the parameters of the transmission computer. You can remove the trans pan and gasket to check for metallic material in the bottom of the pan. There is normally a strong magnet in the pan catch the material so I can't move freely through the transmission itself. It only takes a very small piece of foreign material to stop the flow of the valve body fluid. I would first take it to somewhere that had a automotive diagnostic scan tool that can read transmission codes to see if there are any active codes. Next you can drop the transmission pan yourself and look for material in it. Basically do a visually inspection and service the transmission fluid, gasket, and filter. Remember, all a automatic transmission is a extremely complicated fluid pump. If its pumping trans fluid properly it's probably working just fine. Been when the trans fluid gets hot, scorched, and stops moving. It will not work. Hope this helps

Nov 28, 2012 | 2001 Isuzu Trooper

1 Answer

I have 2001 Isuzu trooper my problem with it now is the transmission light is flashing and the check engine light is on


Okay if you have checked you fluids and made sure they are full then you may need to reset the computer. You may also have a sensor switch problem. To check these problems you can go to auto zone or o'reilly's and borrow a diagnostic meter. That should give you the option to reset or give you the code to what else may be wrong. It's pretty easy you just plug it in and follow the on screen menu. They let you use it for free and it does a really good job. Hope that helps and good luck.

Nov 08, 2012 | Cars & Trucks

1 Answer

2001 trooper losing transmission fluid not find any leaks


Is it a automatic or standard if it is an auto.I would check the modulator valve on the trans,pull the vaccum line off and check for trans fluid in the line.

Sep 13, 2012 | 2001 Isuzu Trooper

1 Answer

Mmy tod check light keeps flashing,check engine light stays on,brake light comes on and off,it drives fine at times then goes into 4 wheel drive and i cant make turns. there is no mechanic within 100 miles...


you need to check out the code first, I know ps701 can diagnose your car. Or you can take it to the auto zone or local dealer to check out, Hope help.....

Aug 20, 2011 | 2001 Isuzu Trooper

1 Answer

Just replaced front pump seal on transmission because diagnostics test said it was bad. replaced all spark plugs,diagnostics test also said EGR vavle had bad flow-nothing done. check engine light went off...


depending on the wear and mileage of your Trooper, I recommend taking it to a transmission shop for a maintanence and band adjustment, the systems you are relying on can be giving mixed values due to other variables (vacuum leaks, etc. for example) current condition could do alot of damage

Oct 01, 2010 | 2001 Isuzu Trooper

1 Answer

The dash transmission indicator changes without any gear change


trans nuetral saftey swich needs replacing
internal switch contacts are shorting together causing the PRND21 lights to move when this happens the trans ECU doesnt know what gear its in which causes clunky shifts and can lead to check engine light coming on

Jun 04, 2009 | 2000 Isuzu Trooper

1 Answer

This is in a 1995 isuzu trooper,4x4, Automatic. 1)What causes intermittent check engine light activation, but when you stop at a light it goes out. the smallest touch of the accelerator turns it on. if...


If you live in the US Take it into an Auto Zone store and they will read off the stored code for you , once you have this you can determine your next course of action.
Other Auto supply outlets may offer the same service.

Hope this is of some help.
Ed

May 05, 2009 | 1998 Isuzu Trooper

1 Answer

Auot transmission light


Your best bet to figure this out is to take the vehichle to a local parts store, like AutoZone, Napa, or Advance Auto Parts.  Once there you can request the to test the check light for you and they will bring a small handheld computer out to the SUV to check the codes and then you can look it up to see what the code error is for.  You can also take it to a mechanic but they will charge you to read the code.  Good luck.

Nov 13, 2008 | 2001 Isuzu Trooper

Not finding what you are looking for?
2001 Isuzu Trooper Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...