Question about 2005 Honda Odyssey

Open Question

How to replace high mount rear brake light in Honda Odyssey 2007

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 496 Answers

SOURCE: 2003 Honda Odyssey Brake light replacement

open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).

Posted on Jan 24, 2009

Ad
  • 496 Answers

SOURCE: 2002 Honda Odyssey brake light replacement

open the rear hatch. Next to the brake light assembly, between it and the hatch there are two flap doors in the brake light trim. Take a small flat blade screwdriver and open these doors. The hinge side of the flap is nearest the hatch opening. when opened, the flaps will reveal two screws. Remove these. then wrap a flat blade screwdriver with some tape (protects the paint) and put the blade at the front outside corner of the brake light assembly. Pry gently rearward and a plastic spear point clip will release. With the assembly off, you can see how to twist out the bulb sockets and replace the bulbs. to replace, put the spear point clip in first, replace the screws, and close the flaps in the trim.

Posted on Mar 05, 2009

dr_greg
  • 192 Answers

SOURCE: Both 2005 Honda Odyssey brake lights don't work.

make sure u have put the right bulbs in. rear brake lamps are dual filament....

Posted on Apr 15, 2009

  • 496 Answers

SOURCE: 2004 Honda Odyssey EX brake light replacement. How do you remove

open the rear hatch. Next to the brake light assembly, between it and the hatch there are two flap doors in the brake light trim. Take a small flat blade screwdriver and open these doors. The hinge side of the flap is nearest the hatch opening. When opened, the flaps will reveal two screws. Remove these. Then wrap a flat blade screwdriver with some tape (protects the paint) and put the blade at the front outside corner of the brake light assembly. Pry gently rearward and a plastic spear point clip will release. With the assembly off, you can see how to twist out the bulb sockets and replace the bulbs. to replace, put the spear point clip in first, replace the screws, and close the flaps in the trim.

Posted on May 30, 2009

polarcycle
  • 1392 Answers

SOURCE: car brake lights won t turn off when car is shut down 1996 Honda Odyssey

It should be your brake light switch. There is a little plate welded to the arm of the pedal that has a hole with a rubber stopper. The rubber stopper is most likely missing, or damaged. You should be able to take a flashlight and see the plate and the switch. If the hole is plugged up, you will need the brake light switch, if not, replace the plug.

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All brake lights on my 2007 Honda Odyssey do not work


The brake light switch is a very common failure on Hondas. The horn is on the same fuse, if it works, the fuse is good.

Sep 20, 2014 | 2007 Honda Odyssey

1 Answer

3rd light diagram


Found these online for you... hope they help.
This first link is specific to your 1st Generation Ody....it's a great forum and hope you get your answers there
http://www.odyclub.com/forums/28-1995-1998-odyssey/20360-need-help-96-third-brakelight.html



http://www.odyclub.com/forums/52-2005-2010-odyssey/57976-how-replace-high-mounted-rear-brake-light.html
In my 2002 Honda Odyssey, the high brake light is accessed by removing a small triangular red piece from the right side of the cover. This piece often breaks but I was successful by soaking the area with STP silicone spray, waiting 15 minutes and then prying the piece up in the slot on the left side with a miniature flat bladed screwdriver. You then remove the underlying screw amd remove the housing. Twist the bulb holder out and remove the bulb by pulling straight out. Push the new bulb in - I usually hold it in a paper towel because by this time my hands are dirty. Twist the bulb holder back in. Push the housing back in starting on the left side. Replace the screw. Put in the triangular piece starting with the right side clip. I then pry the housing open with my screwdriver very carefully to fit the left clip in. If you break the piece it's under $10 at the Honda dealer. The piece is not well designed but you can make it work if you're patient.

Also, be sure you purchase the replacement light bulb lamp first before you tear everything apart. See sources and related links below for more light bulb information.

Read more: http://wiki.answers.com/Q/How_do_you_replace_high_rear_brake_light_on_a_Honda_odyssey#ixzz1nFpCWpiu

Feb 23, 2012 | 1996 Honda Odyssey

1 Answer

While driving our 2006 honda odyssey a b3 warnng light came on, ?


that is telling you that it is do for maintenance schedule b maintenance Replace engine oil and oil filter
Rotate tires

Inspect front and rear brakes

Check parking brake adjustment

Inspect tie rod ends, steering gear box, and boots

Inspect suspension components

Inspect driveshaft boots

Inspect brake hoses and lines (including ABS)

Inspect all fluid levels and condition of fluids

Inspect exhaust system#

Inspect fuel lines and connections#

#: See information on maintenance and emissions warranty on page 329 of your owner's manual.


Independent of the maintenance messages in the multi-information display, replace the brake fluid every 3 years.

Inspect idle speed every 160,000 miles (256,000 km).

Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy.

B3 Maintenance also includes changing the transmission fluid

Sep 12, 2010 | 2007 Honda Odyssey

1 Answer

I just replaced my brake stop with on my Honda


it could be just a bad earth on that side give all the earths a good cleaning up and then try it again,,,

Oct 31, 2009 | 2002 Honda Odyssey

1 Answer

Both 2003 oddyssey brake lights dont work High


clean bulbs socket out using the electronic spray cleaner for electrical connectors.

May 13, 2009 | 2003 Honda Odyssey

1 Answer

How do I remove the right rear fender brake light assembly in a 2005 Odyssey to change the bulb


open the tailgate. you will see two taps on the side of the lense assembly. pull them back and there is 2 bolts. then you need to pull the lense straight out.

Mar 08, 2009 | 2007 Honda Odyssey

1 Answer

2003 Honda Odyssey Brake light replacement


open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).

Jan 22, 2009 | 2003 Honda Odyssey

Not finding what you are looking for?
2005 Honda Odyssey Logo

Related Topics:

718 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...