Question about 2004 Jeep Grand Cherokee

Open Question

Low brake pedal. 2004 Jeep Grand Cherokee. new pads all around.

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 47 Answers

SOURCE: 2000 Jeep Grand Cherokee brakes make a hissing noise

has your brake pedal seem to be stiffer than usual? the sound you hear is from the brake booster if it has a leak it will cause a noise but you would have a stiffer pedal because the booster is loosing vacuum.

Posted on Feb 08, 2009

  • 1 Answer

SOURCE: 99 jeep grand cherokee

i just had the same problem,replace your brake booster,oreilly auto parts $122.00

Posted on Mar 29, 2009

  • 1 Answer

SOURCE: 2005 Jeep Grand Cherokee (HEMI) Service Electric Brake System

Problem is a faulty Steering Angle Sensor (part of Steering Module) located in steering column ...replacement part $600.00.

Posted on Apr 16, 2009

  • 6982 Answers

SOURCE: brake pads specifications

I just searched google and looked at JC Whitney. They have brake parts and ship internationally. (don't know cost) But it's worth looking into!

Posted on Apr 30, 2009

  • 1 Answer

SOURCE: 99 Jeep Grand Cherokee Brake light problem

You can adjust the switch by putting your thumbs on either side of the switch plunger and pushing toward the brake lever. The switch shaft will ratchet into the new position which is will then be depressed by the brake lever when it is the brake is not being depressed.

Posted on Jun 23, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Installed new brake pads on 2000 jeep grand cherokee but experiencing brake drag on left wheel...strong odor of overheating. caliper is free and I suspect the piston seals may be binding on release of the...

Good chance of caliper to piston issues like you describe, the pistons must move freely (freely a relative term). Easiest to replace with rebuilt calipers. You need perfect brakes. Consider replacing rubber lines at the same time, pretty easy during caliper job and DO NOT let M/C run low on fluid during this process.

Oct 09, 2010 | 2000 Jeep Grand Cherokee

1 Answer

My Jeep has low brake pedal. I have bled the

Some time the brake fluid gets water in it and this can have a effect! Some vechicle recommend replacing the brake fluid every few years for this reason. Just a thought

Jul 01, 2010 | 2005 Jeep Grand Cherokee

1 Answer

2004 Jeep Grand Cherokee loud grinding sound when braking

It would be hard to guess at you electrical problems but get your brakes checked.It sounds like your pads have worn down to metal on metal.Very dangerous and can get expensive to fix the longer you leave it.A visual inspection can tell within minutes if this is the problem.If this isn't the problem the 2nd most common thing is a loose brake caliper or caliper mount.A friend with some mechanical knowledge will be able to check the brake pad thickness very easily and quickly with just a torch.Hope this helps

May 11, 2010 | 2004 Jeep Grand Cherokee

1 Answer

2004 jeep grand cherokee cruise control does no set. Is there a bad fuse?

try the brake switch located behind the brake pedal....had similar problem and this fixed it

Feb 14, 2010 | 2004 Jeep Grand Cherokee

1 Answer

The brake lights don't work on my 04 jeep grand cherokee, the fuse is good.

Check your bulbs and your wiring. I would also make sure to check around your brake pedal. Sometimes that area trips the wiring if caught up.

Sep 19, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Brake petal goes to floor

if you cant find any leaks in lines or cylinders or calipers u probaly have a bad booster
see lots come threw my shop like that but also their is a vacum line that runs to the booster and it hooks to a plastic valve that goes in to the booster those get gloged and you loose pedal as well try replacing that before you bye a new boooster

Mar 26, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Changed front brake pads. brake pedal goes to floor. no brakes

Something doesn't sound right, you shouldn't have to remove the brake line to install pads. Did you have to do this on both sides? Do the new pads and the old pads look the same? Did you get the caliper on crooked? Just recheck your work first before replacing more parts. When you install the caliper, You have to hook the pad on one side first before you slide it over the rotor.

Mar 26, 2009 | 2000 Jeep Grand Cherokee

2 Answers


hmm interesting have you done any wiring to the lights at all?

Dec 13, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides