Question about 1991 Toyota Previa

1 Answer

1991Toyota Previa DRIVER WON'T UNLOCK - 1991 Toyota Previa

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Does the handle have tension when you lift it , or is it free floating? Could be a broken plastic lever on the inside of the handle. Does the electric unlock work for the other doors? Can the door be opened?

You could call a locksmith who will reach in by the window glass and release the lock. $50 to !00. Less if you drive it to his shop. That will get you in, but it may happen again. I don't see much choice but to remove the door panel and take a look. Remove all visible screws, some can be hidden behind plastic plates. The rest of the attachments are probably plastic snaps and clips. Remove the panel and see what is not happening.

Auto parts stores, online, or perhaps the library may have a Chilton's manual. it will have full pictures and details. Well worth the $10. I've done numerous similar repairs to my wife's Sienna. Lock motors, door handles, blown speakers, power window motors, etc. All parts are available on line.

Spencer

Posted on Oct 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove egr valve on a 1993 toyota previa


That previa has a central engine, so all engine work requires you take out driver and or front passenger seat out.

The EGR placement is here >> http://www.autozone.com/autozone/repairguides/Toyota-Previa-1991-1997-Repair-Information/EMISSION-CONTROLS/Exhaust-Gas-Recirculation-System/_/P-0900c1528008a1d5

near the bottom of the page.
Good luck

May 13, 2014 | 1993 Toyota Previa

1 Answer

Why does my 1991toyota carolla shake when driving?


You need to do wheel balancing then your problem will be no more

Mar 08, 2013 | 1991 Toyota Corolla

1 Answer

Previa rear ac switch won't turn on. relay, resistor and all fuses ok.


may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: http://www.spobd2.com

Feb 17, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

1991 toyota previa van won't start sometimes and cuts off by it self sometimes was told not the fuel pump but the computer.What kind of computer needs to be replace to fix that?


probably the main one. did you try the map sensor. my dad had one that he spent alot of money on and come to find out it was a $26 map sensor that plugs in on top of the motor.

Jan 20, 2013 | 1991 Toyota Previa

1 Answer

Heater won't turn on on 1994 toyota Previa


bad resitor for the blower motor

Dec 01, 2012 | 1994 Toyota Previa

3 Answers

Where are location crankshft sensor??


DISTRIBUTOR IS THE CRANKSHAFT SENSOR.

Aug 25, 2011 | 1992 Toyota Previa

1 Answer

Whare do i find the engine number on a toyota previa???


well if you are loking for the v.i.n. it will be lower driver side corner of wndshield and on sticker inside driver's door jamb. if it's the engine code your looking for this is it 2.4 L 2TZ-FE I4 2.4 L 2TZ-FZE I4 supercharged. if your previa is a 1995 it would be the supercharged model as that was the only engine available that year. if this was helpful please rate 4 thumbs.

Dec 31, 2010 | 1995 Toyota Previa

2 Answers

Sliding passenger door will not unlock/ open


I assume you mean a 1991 Previa (that was the first year of the model). It is likely you have broken a small spring inside the door that connects the handle to the latch. The only way to tell is to remove the inner door panel (two screws: one under the door handle and one midway along the upper part of the interior door structure then pull out and up).

Apr 04, 2009 | 1991 Toyota Previa

1 Answer

Toyota Previa 1993 AM-FM Cassette Unit Model 11709


Send me the code for the radio, I have all of the unlock codes.

Jun 29, 2008 | 1993 Toyota Previa

Not finding what you are looking for?
1991 Toyota Previa Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...