Question about 1998 Toyota Corolla

1 Answer

Over flowing the secondary jet of my carburator.my engine is 2e toyota.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,122 Answers

Hi Vidsha, How do you know the secondary jet is over flowing? Your carb has two chokes or venturie....You'll see both when looking from the top of the unit....Do you mean that fuel is flooding from one of these?
If so the most likely cause will be found in the float chamber of the carb and this will mean stripping it....If no-one has tampered with it before, the float level setting will most likely not have moved, which means that in all likelyhood there's dirt causing the needle not to close against the seat correctly....I think before we go further, do you want to get into disassemling the carb, or would you prefer to take it to a shop....If you decide to go ahead youl need a carburator repair kit, which will be specific to your carb....Its a lot of work and you'll need to set up the carb properly afterwards....Re adjusting it and so on....Let me know what you decide....Regards Johngee

Posted on Oct 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many intake valves does a toyota tazz 2e engine 2004 model have


earlier 2Es have one inlet one exhaust
after the east west front wheel drive were introduced
most 2E toyota engines have three valves per cyl
two inlets and one exhaust

if you need the correct information on your 2004 2e engine
,,,,undo the rocker cover

e397a648-22cf-4373-b847-0ca46d719837.jpg

Jun 28, 2016 | Toyota Cars & Trucks

1 Answer

Where is the Exhaust gas recirculation valve egr located on a toyota corolla 2e engine? carburator type.


EGR is on passenger side of engine at the end of the intake manifold, It should be a ROUND vacuum actuator being held on with 2-12mm nuts.

Aug 22, 2015 | Toyota Corolla Cars & Trucks

1 Answer

What is the genuine jet size of a carburator in toyota corolla ae91 1994 version???


Primary Man Jet size # 99-101
Secondary main Jet size # 150
Hope that works.

Oct 23, 2014 | Toyota Corolla Cars & Trucks

1 Answer

Toyota 2E motor carb overfueling


-Flow assembly and needle jet is not position as it suppose to.


Good luck

Mai

Mar 19, 2014 | Cars & Trucks

1 Answer

Acceleration is too slow from 0 to 25 mph


i would assume that your engine still runs on carburetor. have your primary jets(in the carb) replaced. normal carb primary/secondary jetting for 1.6cc engine is 105/135. primary jets basically is responsible to acceleration, secondary jets are for speeding.

Aug 06, 2011 | 1987 Toyota 4Runner

4 Answers

What are the valve clearances for a 2e 12 valve engine?


I have Toyota Corolla EE80 2E engine with 12 valves. I recently top overhaul but the engine is not running in perfect condition. The engine rpm goes up and down (engine shaky). I set the rpm around 1200, if i set it lower than that the engine will stop. I check the engine timing with both the cam and crank on the correct mark. Sounds like the carburetor failure but i had service it but still the same. If i turn the distributor to the right (******) the engine rpm drop, than i turn it to the left (advance) but the rpm drop too, as i know the engine rpm should raise high and could hear the pinking sound from the valves if the the engine accelerate. For your info, i bought the cylinder head from someone who previously general overhaul his engine about 6 months ago. He dismantle his engine because of con rod problem. I just fix the cylinder head to my engine without grinding and adjusting the valves because it had been grind and adjusted 6 months ago. I check the spark plugs but look all black. I pull the plug cable one by one during the running it sounds all ok. Now i wonder what is actually wrong with the engine? Do i need to adjust the valve clearance too? What is the valve clearance for both exhaust and inlet, hot and cold? If i do the valve adjustment and yet still the problem, what is next?

Jan 02, 2011 | Toyota Corolla Cars & Trucks

2 Answers

Toyota 4K Engine Caburetor


replace or adjust the jet, primary jet 110 and secondary jet 140, adjust the air valve, and the throttle valve.

Jan 09, 2010 | 2009 Toyota Avalon

1 Answer

Carburator


Dear Sir,

Recently i brought a Toyota Tersel Car, its every things are ok but its fueal Consumtion is very bad, its 98 brand New miodel , running total KM is 103,000
Eng No is 2E-3148032.

PLEASE GIVE ME SOLUTION FOR IT, I AM expect 12 Km Per Ltr, its carbulator model. but engine condition is good,

your kind cooperation in this regard is highly appriciated

Thanks & Best regard

Saaranga

Jul 29, 2008 | 1998 Toyota Tercel

Not finding what you are looking for?
1998 Toyota Corolla Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...