Question about 2004 GMC Envoy

1 Answer

2004 gmc envoy. has a 6cyl and a serp belt. the center pully off set to the left (i think its a water pump) has a bad wobble and making a horrible noise. Not over heating and no leaks. should i just change the pully? possible just baerring issue in the pully?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GMC Master
  • 5,332 Answers

If the fan is attached to it than it is the water pump making the noise and it will need to be replaced. If the fan clutch is not attached to it than it is either the idler pulley or the tensioner pulley. The tensioner is on the passenger side (left) of the front of the motor.

Posted on Oct 07, 2010

Testimonial: "the fan is not on it. good call thank you"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screaming noise coming from motor gets louder as rpm changes gears sounds like something screaming


if not alternator ,power steer pump,air con ,water pump \
serp belt tensioner or idle pullys

check crank pully is not running out of true

could be serp belt squeal
replace the serp belt

2004-dodge-ram-1500-slt-4.7l-rlvjad5rfjfbkkiwkdzzrtel-1-0.jpg

Mar 11, 2017 | Cars & Trucks

1 Answer

How to replace water pump on a 2001 caravan


3.0 timing belt driven, if a 3.3 or 3.8 serpentine belt driven,darin cooling system,remove serp belt,remove water pump pully & pry motor over to left while feeding the pully past the rt frame rail,unbolt water pump then reverse what you took off.

Oct 04, 2014 | 2001 Dodge Caravan

1 Answer

2004 Mitsubishi Outlander started squealing loudly when turning right


If it's the sound I'm thinking of you might just need a new belt or a pully. Typically water pump going out sounds like you have a turbo winding up and steering will growl.

Mar 18, 2014 | 2004 Mitsubishi Outlander

1 Answer

I installed a new powersteering pump on a 88 gmc k1500, now it eats serpentine belts cant get the pullies lined up right how do i fix?


I would install a reman pump,never try & remove a pully
The pump wasn't the problem

Your problem is most likely that the crank damper has
worn & moved. The rubber in it is the issue & it is hard
to see any misalignment

Jun 13, 2012 | Cars & Trucks

1 Answer

My fan vibrates on my envoy, it looks like the housing that the serp. belt goes around is loose causing the fan to vibrate, but I can't figure out how to tighten the housing. I tried turning the big...


The tensioner pulley may be faulty. There should be a lot of tension on the pulley to keep the belt tight. If the tensioner can be moved easily, it should be replace.

Dec 21, 2010 | 2004 GMC Envoy

1 Answer

WHERE IS THE WATER PUMP LOCATED...2003 ELANTRA


hi from uk fortunately the water pump on your car is not driven by cambelt ! the pump is driven by serp belt the pumps location is = if you look at front of engine view from front wing as you look down front you will see a large pully on left of cambelt covers and this is the water pump access to pump is best by supporting car and removing wheel and then the under wing cover that is secured by screws some advice for you if you intend renewing pump the pump pully is secured by 4 bolts use a 10 mm cranked ring spanner or socket loosen these bolts before you remove the drivebelt as belt holds pully and helps to prevent pully turning as you try to loosen these bolts hope this helps ?

Jan 26, 2010 | Hyundai Motor 2003 Elantra

1 Answer

FAN WOBBLES AND MAKES NOISE?


Water pump is going out and that is the first thing that happens

Jan 20, 2009 | 2004 GMC Envoy

1 Answer

Code reading


replace the serp belt and check idler and tentioner pullys. serp belts make noise after antifreeze or oil has been on them. good luck

Jun 23, 2008 | 1995 Chevrolet Tahoe

Not finding what you are looking for?
2004 GMC Envoy Logo

694 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...