Question about GMC R1500

1 Answer

Location of fuel pump assembly on 89 gmc suburban 1500

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • GMC Master
  • 5,332 Answers

If its electric its in the fuel tank. Depending on where you live the sending unit may be in pretty rough shape. Also the older GM's are pretty well known for burning up the terminals in the connector on the inside of the sending unit. So even if you replaced the pump the sending unit could be bad and the pump could still not work.

Posted on Oct 07, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2002 Chevy express 1500 fuel relay location

    images for 2002 Chevy express 1500 fuel relay location

    More images for 2002 Chevy express 1500 fuel relay location

    GM Fuel Pump Relay Testing - YouTube

    ? 27:40

    Mar 14, 2012 - Uploaded by ScannerDanner
    1999 Chevy Suburban with no fuel pressure. The following is covered in this video: 1. How to test a fuel pump relay in a power distribution box.

Oct 23, 2015 | Cars & Trucks

1 Answer


ZUnder the hooed in the fuse and relay center on drivers side.

Jun 19, 2014 | 1993 GMC Suburban

1 Answer

1993 gmc suburban rough idle, stall in reverse

Idle air control (IAC) control rpm idle during idle.

Test it on idle with ALL electrical on full force.
RPM should increase.
If RPM remain the same then IAC is question.

Jan 13, 2014 | 1993 GMC Suburban

1 Answer

How do I remove the front clip on an 89 GMC Suburban 1500 4X4 to facilate engine access?

its alot alot of work but the whole nose will come off cab and frame in one piece

Mar 07, 2011 | 1989 GMC Suburban

1 Answer

Where is the fuel filter canister located on this 2006 GMC sierra 1500

The fuel filter on this vehicle is located inside the fuel tank and is a part of the fuel pump module. As such, it can only be serviced by replacing the pump module assembly. In theory, these are a lifetime filter and I've only seen a couple of them plug so far and those were due to dirty fuel that came out of a private service tank. The only real test to see if the filter is restricted is to have someone road test the vehicle with a fuel pressure test gauge hooked up to the fuel rail so the actual pressure can be observed while the vehicle is under load. Hope this helps out!

Jul 13, 2010 | 2006 GMC Sierra 1500 2WD

1 Answer

Where is the fuel safety switch located in a 1999 gmc suburban 4x4 1500

There is no fuel safety switch, thats a FORD trick. What is the problem?

Mar 18, 2010 | 1993 GMC Suburban

1 Answer

Hiw do you replace the fuel pump in the gas tank of a 89 gmc suburban?

you'll have to unbolt and lower the gas tank, removing the clamps for the filler neck and vent, also unhooking the fuel pump wiring and the fuel lines. it works best to run it as low on gas as you can; the tank is much easier to raise and lower when it's not full of gas. once you get it down, you'll see that there is a lock ring that you have to use a hammer and punch to rotate counterclockwise to unlock the fuel pump assembly from the top of the tank. Put the new one in as you took the old one out, and return the tank to its original position, hooking everything up as you go. put Fuel in it, and you should be good to go.

Nov 29, 2009 | 1989 GMC Suburban

1 Answer

Where can i find the fuse for the fuel pump relay and fuel pump on an 89 suburban

You should find it under the hood in a fuse box near the firewall

Aug 10, 2009 | 1989 GMC Suburban

1 Answer

96 chevy 1500 suburban wont start

check the catalytic converter i had the same problem with my suburban and mine was a clogged converter.

Jan 19, 2009 | 1996 GMC Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

76051 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides