Question about 1988 Nissan Pulsar

1 Answer

I need to change the headlight bulb - 1988 Nissan Pulsar

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 642 Answers

Pull the connector plug off. Remove the rubber dust cover. You will see a wire clip that holds the bulb in place. Push on the clip, slide it to the right of the vehicle and release. The bulb can now be removed. When replacing the new bulb do not touch the glass. Lift the clip, insert the bulb into the headlight, refit the clip. Replacing the dust cover can be a pain. Hook it in place on one side, with thumb and forfinger grip the other side and twist it as if to turn it inside out, press it against the rear of the headlight and release. Reconnect the wiring connector.

Posted on Oct 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to change the headlights in a 1998 cavalier but I don't know how to take off the cover for the headlights?


You change the bulbs from the back of the composite headlight assembly. Open the hood, turn the bulb connector counterclockwise-about a quarter turn, and pull connector and bulb out. Take old bulb out, put new on on-don't touch the bulb glass with your fingers, body oil may shorten bulb life.

Dec 23, 2012 | Cars & Trucks

1 Answer

How do I replace a headlamp?


    Follow these steps to change the headlight bulb on your vehicle:
    1. Open the engine compartment hood.
    2. Locate the back of the headlight to determine the lamp and bulb type.
    3. Decide which bulb you need to replace.
    4. Purchase the correct bulb for your headlamp.
    More items...

    Changing a Headlight ' DMV.org

    www.dmv.org > how-to-guides > headlight

Apr 10, 2012 | 2011 Chrysler 200

1 Answer

NEED to change daytime running lights


YOU NEED TO RAISE THE HOOD,YOU HAVE TO REMOVE HEADLIGHT HOUSING BY TWISTING THE HEADLIGHT HOUSING MOUNTING RODS OUT OF THEIR CLIPS AND PULL UP THEM STRAIGHT UP TO DISENGAGE THE HOUSING FROM VECHICLE. WITH HEADLIGHT HOUSING OUT VECHICLE REMOVE LIGHT BULBS, YOU NEED TO WEAR CLEAR PAIR OF LATEX GLOVES WHEN HANDLING NEW HEADLIGHT BULBS BECAUSE HEADLIGHT BULBS ARE HALOGEN BULBS OILS FROM FINGERS OR HANDS CAN CAUSE HALOGEN BULBS OVERHEAT AND BLOW OUT.HALOGEN BULBS VERY EXPENSIVE THEY COST FROM $10.00 UP TO $20.00 OR MORE SO WHERE CLEAN GLOVES WHEN HANDLING BULBS.

Aug 03, 2011 | 2007 Chevrolet Suburban Three-Quarter-Ton...

1 Answer

My car 2003 altima I need change light bulb. need know how to remove head light to change the bulb.


You don't have to remove the headlight to change the bulb. The bulb can be removed from the back of the headlight, usually by turning the bezel ring that holds the bulb onto the headlight housing. Just make sure you do not touch the glass part of the bulb while replacing it or it will burn out again fast.

Jan 27, 2011 | 2003 Nissan Altima

2 Answers

How do i change headlight on a 2003 Murano


To change the headlight bulbs, you will need to remove the wheel liner cover to gain access to the back of the headlamp assemblies. Then you can pull off the screw cap / cover that seals the bulb into the headlamp assembly for the bulb you want to change. Once the cap is off, you will need to disconnect the harness from the back of the bulb. With the harness off, you will then need to either twist a black lock ring to release the bulb, or you will need to push on a metal lever to release the bulb (this varies on models and high and low beams).
Install in the reverse order....

Nov 16, 2009 | 2003 Nissan Murano

1 Answer

I need to change the low beam headlight bulb


  1. Remove headlight mounting bolts and nut
  2. Remove assembly
  3. Install headlight assembly (with new bulb)
  4. Replace/tighten headlight mounting bolts and nut
e2ac826.gif


Oct 30, 2009 | Hyundai Motor 2003 Elantra

1 Answer

How do I change headlight bulb . Left side low beam headlight bulb is blowed . I have the new bulb and just need to know where the lever or turn object is to remove from the back side so I can change the...


Reach beind the headlight and just unscrew the cap that holds it in. However don't touch the new bulb with your bare fingers or you will drastically shorten the life of the bulb.

Oct 16, 2009 | 2003 Chevrolet TrailBlazer

2 Answers

How do you change the right front headlight bulb on a kia sedona


Remove the headlight assembly. Just remove the 3 bolts with a 10 mm socket and pull it out so you can disconect the wire harness. After that pull the whole assembly out and unscrew the bulb cover. The bulb is held in with a spring clip.

Dec 25, 2008 | 2003 Kia Sedona

2 Answers

Changed passenger side headlight bulb, now unable to adjust or align head lights


Changing the bulb should not have affected the housing adjustments.

The bulb is just inserted into the headlight housing. The adjustments on the headlight housing is what adjusts the alignment of the headlights.

Did you maybe not get the bulb not seated correctly in the socket? Or didn't get the socket not seated correctly into the housing?

Aug 12, 2008 | Ford Focus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...