Question about 2006 Dodge Charger

1 Answer

2006 dodge charger pcv valve location - 2006 Dodge Charger

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

5.7L


2006 dodge charger pcv valve - 9491.jpg The PCV valve (3) is mounted into the top/right side of the intake manifold (2).

9493.jpg
1.The PCV valve (1) is sealed to the intake manifold with two O-rings (2).
2.Remove PCV valve by rotating counter-clockwise 90 degrees until locating tabs (3) have been freed. After tabs have cleared, pull valve straight up from intake manifold.3.After valve is removed, check condition of two valve O-rings (2). __________________

Posted on Oct 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of the pcv valve on 2006 dodge magnum 2.7


Have you checked the parts store to see if they even list one for that car? Some cars do not have one.

Dec 13, 2014 | 2006 Dodge Magnum

3 Answers

Replace the PCV valve on the '09 dodge grand caravan


Hello! Here is the location of PCV valve for 3.3L, 3.8L, and 2.4L....Guru....saailer



saailer_87.gif

Mar 08, 2011 | 2009 Dodge Grand Caravan

1 Answer

How do you get the pcv valve out of the valve cover


Usually you grasp it an pull it out.

Positive Crankcase Ventilation (PCV) Valve Removal & Installation To Remove:
PCV Valve location (3.3L & 3.8L engines shown, 2.4L similar) chry-04-33-829.gif

  1. Disconnect the vacuum hose from the positive crankcase ventilation (PVC) valve.
  2. Remove the positive crankcase ventilation valve from the valve cover.
To Install:
  1. Install the positive crankcase ventilation valve in the valve cover.
  2. Connect the vacuum hose to the positive crankcase ventilation valve.
prev.gif next.gif

Jan 16, 2011 | 2006 Dodge Grand Caravan

1 Answer

2006 Grand Caravan: Can't get pcv valve from a 3.8 dodge grand caravan...


I just replaced mine and had the same problem. If you look at the new one, you should find a small hole at the base of the metal tube. Using a mirror, I located the same hole in the one in the valve cover and inserted a pointed awl into it and was able to pry it out. Do it slowly since you are prying against plastic. When inserting the new one, I found that it should not be inserted as far the original one was and has a gentle snap.

May 17, 2010 | 2006 Dodge Grand Caravan

1 Answer

Hoping you can help......need the location for the Pcv valve for 2006 Dodge,Durango, 8 cylinder w/ a 4.7L?


On a 2000 Durango V8 the PCV is located on the side of the oil fill tube under the cap

May 06, 2010 | 2006 Dodge Durango

2 Answers

Where is EGR Valve located on a 2006 dodge charger 3.5L pic would be helpful


to find the egr valve you will have to remove the purge soleniod from the bracket.

1. EGR tube
2. EGR Valve



8cd5dac.jpg

Oct 04, 2009 | 2006 Dodge Charger

1 Answer

SPARK PLUG INSTALLATION ON 2006 DODGE CHARGER 2.7L


In my experience with the 2.7L engine, the spark plugs are located on the top of the engine below the individual ignition coils. The coils are placed between the intake manifold and the valve covers, 3 per side. The coils are held in with "torx" screws. Simply remove the screws, and disconnect the connectors to remove the coils. The spark plugs will be underneath. Be sure to properly gap the spark plugs for maximum life and emissions compliance. Also, an improperly gapped plug can shorten the life of the coil packs.
Hope this helps!

Jul 25, 2009 | 2006 Dodge Charger

Not finding what you are looking for?
2006 Dodge Charger Logo

1,058 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...