Question about 1995 Chevrolet Tahoe

2 Answers

My 1995 Chevy Tahoe brake light switch wont stay in position and the brake lights stay on. I replaced the switch and had the same problem.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

All lights work on my 95 two dr thane except back parking lights, brake lights good, turn signal good, just no power to back parking lamps...? help please, try to do this by my self

Posted on Dec 17, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

Brake Light Switch REMOVAL & INSTALLATION

  1. Disconnect the negative battery cable.
  2. Disable the SIR system (if equipped).
  3. Remove the clip (R/V Series) or unclip the switch (C/K Series) and unplug the electrical connector from the brake light switch.
  4. Remove the switch.
  5. Installation is the reverse of removal.
My 1995 Chevy Tahoe brake - prev.gif next.gif

Posted on Oct 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fix cruise control on my 2009 Chevy tahoe


Most common failure (other than fuse) is the switch at the brake pedal which kicks it out of cruise. Switch must be in correct position and adjusted such that it is depressed fully when brake pedal is up.

Aug 01, 2014 | 2009 Chevrolet Tahoe

1 Answer

Break light stays on in my 2002 chevy tahoe?


Check the brake light switch on the end of the steering column close to the firewall...

Feb 05, 2014 | 2002 Chevrolet Tahoe

1 Answer

I have a 1995 tahoe and just replaced the brake power booster. I had to pry off the switch interruptor, which is located on the brake pedal, to remove to the power booster cable. I've got it all back...


The retainer that was damaged upon removal does not provide a ground path for the lights, however the spring tension does hold the switch in position.
These retainers are available at your local dealership as brake switch recalls are quite common on GM trucks.

Feb 26, 2010 | 1995 Chevrolet Tahoe

1 Answer

95 chevy tahoe no BRAKE LIGHTS


first thing I would suggest is replacing one of the bulbs to see if they are both just burned out.Other than that it may just be a fuse

Jan 24, 2010 | 1995 Chevrolet Tahoe

2 Answers

Chevy tahoe 1999 all 3 brake light wont work good fuse, bulbs, brake switch


Chevy uses a rear lamp junction board that is under the truck at the rear frame/tire area. Check there for your problem.

Jun 19, 2009 | 2000 Chevrolet Tahoe

4 Answers

Emergency brake light stays on on my 03 tahoe


I have an '03 Chevy Tahoe and I had a similar problem. I discovered that there is a bare copper striking plate or tab that the medal emergency parking brake pedal touches when the emergency brake is set. It turns on the idiot brake light in the dash. It had broken off and the light stayed on all the time with the say issue of chiming whenever the vehicle is in motion. You or the dealership must replace that striker plate to fix the problem.

Jun 02, 2009 | 2003 Chevrolet Tahoe

1 Answer

Brake light stays on after replacing brake line and bleeding


You may need to do a code scan,this will reset the computer and reset any codes if the brake problem has been taken care of.Autozone Shucks/Kragen/O'Reilly's will do this for free.

May 31, 2009 | 1996 Chevrolet Tahoe

1 Answer

Brake lights don't stay on when I press on brake pedal. I have a 1998 chevy tahoe. Can someone help?


Stay on or go on when brake peddle is used?  If there is no brake lights check the fuse, and there is a brake light switch by the blrake peddle arm. Check the wire and check to see if the switch need to be re adjusted. Worst youmight have to replace the switch. Good Luck

Apr 06, 2009 | 1999 Chevrolet Tahoe

1 Answer

Ab sensor or anti brake light wont go off how to fix/94 tahoe


If you have an autozone near you ,go there ask them if they could hook up a code scanner for the abs light to find out why it's on.If not take it to a dealer. you need to get the code to pin point the problem.

Jan 28, 2009 | 1995 Chevrolet Tahoe

Not finding what you are looking for?
1995 Chevrolet Tahoe Logo

809 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6910 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...