Question about 2001 Hyundai Sonata

1 Answer

Removing rear door panel

I rolled down the rear window of my sonata on sunday only to not be able to roll it back up again. seems to have slipped a clip or the motor to move the window up and down is broken. I need instructions to remove the door panel so that I can take a look and get an idea of the parts I need.

Any idea where I can get instructions like this?

Posted by on

  • Anonymous Mar 15, 2014

    pulled door panel saw no broken parts all looked ok windows seems to slide forward while rolling up

  • Anonymous Mar 16, 2014

    how do i remove rear door panel of 2009 sonata?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 241 Answers

Remove the door window regulator handle and then remove clip using a piece of cloth (Manual type only)
Remove the rear door inside handle housing.
Remove the mounting screws (3EA) from the trim fasteners and the door trim panel to pry off. Disconnect the connector.
Insert a trim panel remover between the trim fasteners and the door trim panel to pry off. Disconnect the connector.
Remove the door pull handle mounting bracket and door inside handle.

Posted on May 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair rear window that won't roll up or


You'll need to remove the door panel from the inside of the door. Go to an auto parts store and ask them for a trim removal tool and a pry tool to help remove the window crank handle - tell the clerk what you want to do. Use the trim tool to unhook the catches around the outside of the door panel. Remember to unscrew the arm rest before you try to pull the panel off the door. Once you have that off, you will likely find that that the glass has slipped off of the track that the bottom of the glass rides on. It helps to have someone help you hold the glass as you lift it up and reset it on the track. Make sure that it is seated squarely on the window track and that it rides up and down smoothly before you put all the parts back together.

Good luck!

May 14, 2013 | Cars & Trucks

1 Answer

2007 denali drivers side back door window will roll down but not back up


Problem should be in the rear door switch. The motor is powered from both switches.

Jul 21, 2012 | GMC Yukon Denali Cars & Trucks

1 Answer

I came out of work yesterday and noticed the rear window rolled all the way down and I know I hadn't done it and then again the same issue. it rolls up fine and does not seem to roll down when jostled...


I had similar problem it was the key switch in the rear tailgate. You need to remove the upholstered panel and then the steel panel and with the window all the way up you can unplug the key switch harness connector to remove it from the circuit. I left mine unplugged and now works fine with just the front panel switch.

Hope this helps

Rick

Mar 24, 2010 | 1998 Toyota 4Runner

1 Answer

I cant seem to get my window to roll down, the motor is working perfectly but the window just dont want to roll down? what should i do?


sounds like the either the spline on the motor has worn or the window track has detached from the window. Remove the interior door panel just enough to see inside the door & try rolling it down you should be able to see what the motor is doing from there should be an easy fix. If its a worn spline you may have to replace the motor

Mar 12, 2010 | 1995 Hyundai Sonata

2 Answers

1998 BMW 528I rear passenger window won't roll back up


replace the window control switch it is defective.

Aug 06, 2009 | BMW 325 Cars & Trucks

1 Answer

I was rolling up one of my rear power windows and it made a terrible noise and then fell back down. It now will not roll up and it slides freely when I pull up on the glass.


You will have to remove the screws of the door panel, than take flat-tip screwdriver and pry off door panel. Than you will have to put window back on the track.

Jun 22, 2009 | 2006 Acura MDX

1 Answer

Power windows roll down slowly


You can try a dry lube or lithium grease on the slow ones, but it sounds more like you need new window motors. Unfortunately Saturns are plastic cars, and... The window motors are not too difficult to change and it requires removing the outer door panel to make it easier to access.

Mar 19, 2009 | 1997 Saturn SL

2 Answers

1994 jeep grand cherokee power window problem


most of the time it is wires in the drivers door that break in the loom

Feb 20, 2009 | 1994 Jeep Cherokee

1 Answer

Manual window won't roll up


so is the right rear door ??
if so here are some instructions.
  1. If applicable, remove the regulator handle by pulling the clip out with a wire hook.
  2. Remove the inside door handle and disconnect the latch rod.
  3. Remove the screws and detach the clips attaching the door panel (see trim pad remover.
  4. Disconnect the power window and courtesy light harnesses.
  5. Remove the door panel bracket and carefully remove the plastic cover
  6. Remove the screw attaching the door lock crank. Disconnect the latch rod from the latch side.
if you have an email address i can send some images on how to do it.
hope this helps

Jun 07, 2008 | 1991 Honda Accord

Not finding what you are looking for?
2001 Hyundai Sonata Logo

1,017 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...