Question about 2000 Chevrolet Tahoe

1 Answer

Drivers window on 2000 tahoe wont roll up. How do you determine if it is the switch or the motor

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Check for busted fuse first and electrical connections If everything is ok, then roll up the window with engine shut-off and hear if there is a noise coming from the motor when you pressed the up down button. If none, Your two options are:
1. Dismantle the switch and clean the contacts.
2. Replace the motor. the carbon brass are worn out.
If you can hear a noise then,
The nylon riser is worn out or derailed.

Posted on Oct 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers side window wont roll up or down


If you can hear the motor when you try to operate the window then it'll be a problem with your window regulator (the mechanism that moves the window up an down), if you can't hear the motor then It's more likely to be a fault with the motor as you said it wouldn't work with the central locking. This means your car has a total closure system, ie you press a button and all windows and sunroof close. These systems are usually seperate wiring from the switched circuit used to operate the windows from inside the car, so, if the windows don't work on either circuit then the one thing they do have in common is the motor.
26006989-zy45ljngluccdhwoffciremx-5-0.jpg
myLightSmile

Dec 14, 2015 | 2008 Chevrolet Tahoe

2 Answers

Hi the passenger side window rolled down one day and wouldnt roll back up so we did some checking and discovered the motor was good so we figured,and was told it probably was the master switch on the...


Need to get a wiring diagram. Buy a book and follow the wiring schematic. It should help you out majorly. Can't really work on electrical issues without one.

Mar 17, 2013 | 2000 Oldsmobile Silhouette

1 Answer

Power window wont work on driver side


could be 2 things 1- the window motor is wore out. 2- the switch has gotten wet and is now corrioded. Start by testing switch with a light tester. if it works then its time to get a new motor. most likly the motor

Mar 13, 2013 | 2000 Chrysler Grand Voyager

1 Answer

2000 ford explorer master switch problem


Check for broken wires inside the rubber boot from the body to the driver door . Happens all; the time ,wires breaking . Also you should have check for B+ voltage at the master switch before replacing .
How To Diagnose your Power Window Problem Is the Switch or motor bad BUY...
The Trainer 24 Power Window Troubleshooting

Apr 29, 2017 | 2000 Ford Explorer

1 Answer

Ive got a chevy tahoe 2002 and the passenger side window wont roll up all the way. When i get it up all the way it slides down about 4 inches


Assuming you have power windows. Had similar problem on 2000 Buick LaSabre. Had to replace electric motor drive assembly inside of door. The motor moves a steel cable around nylon/plastic pulleys. In time the cable cuts into the pulley. Access motor assembly by removing inner door panel. I had to purchase assembly from the dealer ($$$). Digital snapshots as you disassemble will help you reassemble. Job took about 1.5 hours, and I had never done it before.

Feb 20, 2011 | 2002 Chevrolet Tahoe

1 Answer

On my 2000 Mitsubishi eclipse, the driver side window wont roll up, and it can't be the motor, cause the passenger window will roll up, and when I try and roll up the driver side it'll make a noise like it...


It could still be the motor.. a small internal short in the motor will let it run but not under a heavier load like pushing the window up. If you can get to the window motor connector by removing the door panel and have a good volt meter you can back prob that connect with small paper clips as just and example. key on engine off, and run the window.. if you get a reading of 12V Then it's most likely an internal short of some kind in the window motor.
Just my thoughts.. Hope it's helpful

Oct 28, 2010 | 2000 Mitsubishi Eclipse

1 Answer

2000 Chevy Blazer Power Window


i have same problem with my drivers side window and now as of today,the drivers wiper wont work???????

Nov 16, 2009 | 2000 Chevrolet Blazer

1 Answer

My back window will not roll down All other


Not much info you gave....manual or power? I either way, if it is power, your switch may be bad in the door panel....most pop off and you can disconnect it and reconnect it to check it. Unplugging the battery for up to 5 minutes also helps in resetting relays.

If the switch works then it is very possible that the motor has gone bad. If it sounds like it wants to go down, then the motor is bad.

If manual, the nylon roller could have jack-knifed in the window glass sash. Removing the door panel will be able to let you see what is really wrong.

Jul 17, 2009 | 2000 Chevrolet Tahoe

2 Answers

2000 Ford expedition window problem


Sounds like you need a window motor. Try hitting in center of door trim panel to see if you can get it to work if so replace motor.

Jul 05, 2009 | Ford Expedition Cars & Trucks

1 Answer

Driver side power window on 2000 s-10 will not go up


The switch has a bad connection or the motor is bad. There are small brushes in the motor that lose connection. Until you get it fixed try holding the switch button to roll up window while slamming the door this might jar the motor enough to work to get the window up

Jun 14, 2009 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?
2000 Chevrolet Tahoe Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...