Question about Ford Escape

1 Answer

I need a front wheel bearing diagram for a ford escape 2002

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 5,332 Answers

The front wheel bearings on the escapes are pressed in. If you plan on doing it yourself you will need to remove the entire knuckle and then have a machine shop or service center press out the old bearing and press in the new bearing.

To remove the knuckle you will
Remove the caliper and rotor
separate the lower ball joint from the knuckle
remove the axle nut
remove the knuckle to strut bolts.

After you have the new bearing installed and everything is back together make sure you tighten the axle nut to the proper spec. Failure to due so will cause premature failure of the bearing.

Posted on Oct 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 escape AWD, replace front hub bearing


Rather than just the bearing, I suggest a new half shaft as the bearings and ABS tone wheel are already assembled. These Escapes are notorious for cracking the tone wheel setting off a code and then disabling the AWD system. So for a very few dollars more than it would take to disassemble the shaft , install bearings and tone wheel just get a new one.

Jun 09, 2014 | 2006 Ford Escape

1 Answer

Want to replace ford 2002 escape front wheel bearing can I without taking off front axel.


No the axle shaft must be removed from the hub assembly, the hub contains the bearing.

Apr 29, 2011 | Ford Escape Cars & Trucks

1 Answer

DO YOU HAVE DO REPACK WHEEL BEARING ON A 2005 ESCAPE AFTER 120,000 MILES


If you're talking about the front wheel bearings, they can't be serviced. They can only be replaced. They are sealed for life (even if the life seems to be a little short).
Here's the front bearing:

zeevert_43.jpg
I never replaced the rear bearings on my 2002 Escape 4X4, but here's a picture of the rear hub.

zeevert_44.jpg

Feb 13, 2011 | 2005 Ford Escape

1 Answer

How to change front wheel bearings on ford escape 4x4


go to mitchell1diy online for the instructions

Aug 14, 2010 | 2002 Ford Escape

1 Answer

Generic problem for all Ford Escape Cars Front wheel bearings are noisy,need to change? how to?


Front wheel drive should be done by a shop. Rear wheel drive just a matter of removing the front wheel dust cover and remove the spindle hub. It is self explanatory thereafter.

Oct 27, 2009 | 2004 Ford Escape

1 Answer

2005 ford escape assembly diagram for the front axle


If they are sealed bearings, you will need a press to get them out. If they are bolt in, just remove the brake pads/rotors, then the axle nut, then the bolts holding the wheel bearing in. Install in reverse order.

Mar 07, 2009 | 2005 Ford Escape

1 Answer

Hearing growling whine sound from passenger side front. Growling produces fast vibration (not shimmy). Sound increases on left hand turns. Sound more pronounced below 60 mph.


You need to replace your wheel bearing. Ford Escape bearings usually need changed around 80,000+ miles from my experience.

Aug 04, 2008 | 2002 Ford Escape

1 Answer

Recently bought a 2004 escape with new tires. IO have to turn the sterring wheel to the right to go straight. I had tan alignment, problem persists.


Is there noise and/or vibration coming from the front end wheel area? If so you may have a bad wheel bearing. Also check your tie rod and u-joints.

Jul 28, 2008 | 2002 Ford Escape

1 Answer

Need to replace the front left wheel bearing on a 2003 escape two wheel drive v6, how do i get the bearing out?


You need to remove the tire, brake caliper and rotor. Remove the axle nut and hub bolts. Take the hub (bearing is pressed in it) to a machine shop to have new bearings pressed in.

A mechanic will usually charge around 300 dollars per bearing (cost included).

Jul 25, 2008 | 2002 Ford Escape

1 Answer

Wheel bearing


u have to take the hub off. and press the wheel bearing out. it takes alittle time to do bc u have to take your rotor and brake assembly off to get to the hub.

Jun 25, 2008 | 2001 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...