Question about 1993 Mercedes-Benz Mercedes Benz 300 Class

Open Question

I got a ssangyong musso 97 it seems to misfire or not be igniting in all cylinders changed leads plugs coil pack that seemed to be the problem but is still the same problem if not worse wondering if it could be something else? sorry about spelling but if you got any ideas appreciate it thanks

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1997 Ssangyong Musso engine has erradic idle & intermittent start

i think the problem is in the fuel line. i have encounter it too.. the best way is to replace all fuel filter. muzzo have 3 fuel filter. 2 located at the engine and the other one located at the fuel tank they called it as strainer. u can see the opening of the tank underneath the back seat of the car. also good suggestion clean the tank. duel dirt is the main cause of your problem cause muzzo have only a small tip that why only little dirt can cause plunging in engine. sory for bad English

Posted on Jul 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Firing order on 97 firebird 3800 series


i would change plugs and wires change one at a time. i would also test the coil pack. may want to do that first.b84cc0c0-1c21-4fba-8806-a21253bc63d6.jpg
http://easyautodiagnostics.com/gm/3.1L-3.4L/ignition-coil-pack-tests-1

Feb 22, 2017 | Cars & Trucks

1 Answer

P0303 cylinder 3 misfire in 2008 Chrysler sebring convertible, changed all spark plugs & coil pack. Engine light continues to come on with this code ?


Recheck all work you have done. Sometimes folks replace the wrong coil pack as they can be easily confusing. If everything seems ok, there are still two possibilities. First, ensure that the fuel injector is consistently firing for the cylinder, and also ensure that it is not constantly firing. Either can cause a misfire, one for too little fuel, one for too much fuel. Lastly, check compression in the suspect cylinder. A broken or burnt valve can cause loss of compression, leading to misfires.

Aug 10, 2016 | 2008 Chrysler Sebring Convertible

1 Answer

Initial start up the engine sounds like its running on 2 cylinders under powered intil the temp gauge reads normal ???? any body got the answer please


Cold starting misfires can often be caused by either tired high tension spark plug leads or ignition coil packs. If replacing leads, then replace with a full, new set. Coils can be changed individually, but it is often the case that if one has failed, then the others aren't far behind. Some cars have individual coil packs on each spark plug. Some cars have a single pack for all plugs and some have coil packs which may control two or more plugs.

To check for a misfire (ignition failure) follow these steps:

(Cold start) (Use a pair of insulated pliers)

1) Start the vehicle

2) When the vehicle starts misfiring, disconnect plug leads or coil pack connections one at a time. If the vehicle idles even more roughly, then that plug or pack should be considered fine.
Replug each connection before disconnecting the next one. Once you disconnect a plug lead or coil pack connection and find no difference in poor engine running, then you have likely found the offending cylinder. Check the spark plug condition, lead and/or coil condition and connections on that cylinder.

3) Replace components as necessary.

Oct 12, 2014 | Cars & Trucks

1 Answer

What is causing this? my 2001 alero has misfire on cylinder 1, i have changed plugs, switched coil packs, it doesnt seem to get up to speed. what is the problem??


The compression could be too low to create the bang it needs, I have seen it a lot, try the connecting wiring harness first it might just have a bad connection, but it does sound like low compression

Aug 29, 2014 | 2001 Oldsmobile Alero

1 Answer

Code P0300 misfired detected. I have cylinder 1 and 4 that doesn't spark. I'have changed one of the coil pack and still no sparks. I have voltage tested on the coil wire (brown) and it shows around 13 or...


sound like bad ignition module.make sure where coil pack set in module contacts is clean and making good contact.also make sure plugs and wires is good.

Jan 09, 2010 | 1997 Chevrolet Cavalier

3 Answers

Misfire on cylinder 4 only when accelerating


Try a compression test. You could have a bent valve or a bad ring on the piston. If the compression test shows it to be much lower than the other cylinders then its a mechanical problem. The valve may not be seating or a weak spring isn't allowing the valves to close and its leaking under load.

Jul 13, 2009 | 2001 Ford Focus

1 Answer

Code p306 misfire on injector 6


Random misfires are usually caused by a leaking vaccum pipe, and will only be apparent at idle and sometimes at low engine speeds under part throttle.
Isolated misfires are usually caused by a faulty injector, coil pack, ignition lead, or low compression.

Well, you're going to have to check the spark plug,  spark plug wire, the coil pack, low compression, and the ignition lead, which only really leaves the injector, or even an intake leak at the offending cylinder. 

Start the engine and then spray intake spray or the like around the intake at the offending cylinder and see if the engine note changes. If it does, then you have an intake leak, otherwise, they need to check the injector in the offending cylinder. 

Good luck and hope this helps. It might just be time for a tune up: new spark plugs and wire or some fuel injector cleaner every fill up for now.

May 05, 2009 | 1998 Oldsmobile Eighty Eight

1 Answer

A4 Quattro,misfire detected cyl4.


Coil packs are relatively common failures on the B5 A4, although it's usually on the four-cylinder turbo. Swap the coil pack with another one on the bracket, clear the code, and then run the car and scan for codes. If the code doesn't change, then the problem is plug or wire. If it follows to a new cylinder driven by the same coil that is currently failing at cylinder four, then it's the coil pack.

Aug 15, 2008 | 1998 Audi A4

2 Answers

Engine misfirering on 1 cylinder


I had similar problem, first it was misfireing on all 4 cylinders so garage changed coil pack which worked for a while! The started misfireing on 1 cylinder so had to change plugs and leads which so far seems to do the job.

Jul 15, 2008 | 2003 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...