Question about 2000 Oldsmobile Silhouette

1 Answer

I have not been able to find the oxygen sensor that is before the catalytic convertor. Do you know where it is?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Good Evening, I am sorry to hear you cannot find the upstream oxygen sensor. Unfortunately it is a difficult one to get at from up top because the way that the firewall sits over the top. It is on the back exhaust manifold, if you were to able get underneath and could follow your exhaust pipe up to the engine you can see it. I hope this helps, and if you have any more questions let me know.

Posted on Oct 07, 2010

  • pvillwock Oct 07, 2010

    Thanks, I look there and see if I can find it.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sensor oxygen


they are in the exhaust. Look for them in the manifolds, before the catalytic convertor, and after the catalytic convertor, but before the muffler.

Nov 05, 2013 | 1997 Mitsubishi Magna

1 Answer

How any oxygen sensors are on a 1999 grand cherokee laredo 4.0 & were is it/they located?


On Grand Cherokee oxygen sensor locations for 4.0 and 4.7 engines, check this diagrams...


12_18_2011_2_25_33_pm.jpg


12_18_2011_2_26_23_pm.jpg

The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the emission package, the vehicle may use a total of either 2 or 4 sensors.

Federal Emissions Package (4.0L and 4.7L engines):
Two sensors are used: upstream (referred to as 1/1) and downstream (referred to as 1/2). With this emission package, the upstream sensor (1/1) is located just before the main catalytic convertor. The downstream sensor (1/2) is located just after the main catalytic convertor.


California Emissions Package (4.0L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the rear/upper upstream sensor (2/1) is located in the exhaust downpipe just before the rear mini-catalytic convertor. The front/upper upstream sensor (1/1) is located in the exhaust downpipe just before the front mini-catalytic convertor. The rear/lower downstream sensor (2/2) is located in the exhaust downpipe just after the rear mini-catalytic convertor, and before the main catalytic convertor. The front/lower downstream sensor (1/2) is located in the exhaust downpipe just after the front mini-catalytic convertor, and before the main catalytic convertor.


California Emissions Package (4.7L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 13, 2011 | 1999 Jeep Grand Cherokee

1 Answer

P0171


Ho Joanne:
On Grand Cherokee oxygen sensor locations for 4.0 and 4.7 engines, check this diagrams...


12_18_2011_2_25_33_pm.jpg


12_18_2011_2_26_23_pm.jpg

The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the emission package, the vehicle may use a total of either 2 or 4 sensors.

Federal Emissions Package (4.0L and 4.7L engines):
Two sensors are used: upstream (referred to as 1/1) and downstream (referred to as 1/2). With this emission package, the upstream sensor (1/1) is located just before the main catalytic convertor. The downstream sensor (1/2) is located just after the main catalytic convertor.


California Emissions Package (4.0L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the rear/upper upstream sensor (2/1) is located in the exhaust downpipe just before the rear mini-catalytic convertor. The front/upper upstream sensor (1/1) is located in the exhaust downpipe just before the front mini-catalytic convertor. The rear/lower downstream sensor (2/2) is located in the exhaust downpipe just after the rear mini-catalytic convertor, and before the main catalytic convertor. The front/lower downstream sensor (1/2) is located in the exhaust downpipe just after the front mini-catalytic convertor, and before the main catalytic convertor.


California Emissions Package (4.7L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 13, 2011 | 1999 Jeep Grand Cherokee

2 Answers

I have 4 oxygen sensors 1 is bad code po431 bank 2 is the upper or lower sensor


DESCRIPTION The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the engine or emission package, the vehicle may use a total of either 2 or 4 sensors.

On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

Left and right are distinguished by sitting in the vehicle, not looking at the vehicle from the front

Aug 17, 2011 | Jeep Wrangler Cars & Trucks

1 Answer

2005 jeep have 4 oxygen sensors 1 bad its 2 bank is it the upper or lower one


DESCRIPTION The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the engine or emission package, the vehicle may use a total of either 2 or 4 sensors.

On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

Left and right are distinguished by sitting in the vehicle, not looking at the vehicle from the front

Aug 17, 2011 | 2005 Jeep Wrangler

2 Answers

2/1 oxygen sensor where is it located


The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the engine or emission package, the vehicle may use a total of either 2 or 4 sensors.
Federal Emission Packages : Two sensors are used: upstream (referred to as 1/1) and downstream (referred to as 1/2). With this emission package, the upstream sensor (1/1) is located just before the main catalytic convertor. The downstream sensor (1/2) is located just after the main catalytic convertor.
California Emission Packages: On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

May 19, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

ENGINE LIGHT CAME ON. ADVANCED AUTO SAID TO REPLACE O2 OXYGEN SENSOR NEAR CATALYTIC CONVERTOR DO NOT KNOW WHERE IT IS LOCATED IN ENGINE


the convertor is located under the car its part of the exhaust system you will see the 02 sensor sticking out of the exhaust pipe

Feb 09, 2011 | 2000 Buick Park Avenue

2 Answers

Will a bad oxygen sensor cause a catalytic convertor to stop up


yes to much fuel air mixture could clog up your catalytic converter and they arent cheap

Jan 11, 2011 | 1998 Nissan Sentra

1 Answer

Looking to repalace oxygen sensors on my 2001 blazer. I don't have a repair manual but need to know the locations of them on the block.


The o2 sensors are in the exhaust system.#1 is before the catalytic convertor and #2 is after the convertor,#1 is the most failed sensor.

Aug 29, 2010 | 2001 Chevrolet Blazer

2 Answers

My 2003 1500hd Silverado 6.0L has the error code of P0420. Can you help?


P0420 is a catalytic convertor efficiency below threshold, basically the convertor is not working to specs. As long as you are under 80,000 miles the convertor is covered under federal warranty for 8years/80K miles at the dealer. If its not covered, you need Bank 1 Catalytic convertor replaced possibly with Oxygen sensors.

Feb 25, 2010 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
2000 Oldsmobile Silhouette Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...