Question about Geo Tracker

1 Answer

How get 1996 geo tracker back in time put on new belt & turned crank by mistake do put cam on E or I i took #1 plug out have it at TDC now what

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 8,531 Answers

Not E or I. There is a hole in the sprocket that has to align with the dip in the cover mating surface

how get 1996 geo tracker - a58bb0c.gif

Posted on Oct 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need cam to crank diagram for 1997 geo tracker


my wild guess, timing belt change out?
or valve lash or , no matter it's all here.

this is the G16B engine,
this full timing belt page, is here. and has link to actual FSM page.
http://www.fixkick.com/t-belt/16-fast-belt-install.html


related issues here

http://www.fixkick.com/t-belt/tbelt-index.html

Apr 18, 2014 | 1997 Geo Tracker 2 Door

1 Answer

1992 geo tracker firing order diagram


there are 2 engines, watch out those rag books mix them in a toxic soup. ( a real FSM is cheap and far better (ask)
8v it the TBI engine, single injector. I restored a 91 to mint, condition.
why not use numbers, low means zero, 150PSI wide open throttle is normal, and more warm or hot.
the 8v dizzy turns backwards from the 16v
your rotor turns CW, clock wise, crank it and watch it....
so the wires must be laid down per last link below.
if lots of advice, in fact could get it going in 1hr or less. hands on.
when you put the belt in, did you use the right marks?
there are false marks there for other engine usage.
the 60a mark is correct the 80c is wrong.
if you get that wrong, there is no hope. thus this page
http://www.fixkick.com/t-belt/tbelt8v.html

here is the dizzy page
http://www.fixkick.com/IGN_timing/8v-procedure.html

easy huh? TDC 0 deg. #1 firing, rotor at red dot.

28a5f249-baea-4641-91ed-90e5d16c05b5.jpg

Mar 18, 2014 | 1992 Geo Tracker

1 Answer

Cam gear installation


very old post
96s in usa (not canada) are all G16b , 16v engines
so
here it full page, and full fsm page linkes, all free.
all 16v have cam cog false marks 2 false
key false and TDC false.
the "I" marks are dead wrong, and few books warn of this fact


http://www.fixkick.com/t-belt/16-fast-belt-install.html

all ways to do it right and correct the wrong(all ways)

Feb 18, 2014 | 1996 Geo Tracker 2 Door

1 Answer

No just finished a valve replacement on 92 geo tracker 8v eng. set crank to TDC on #4 cyl and the cam to the proper alignment notch on rear valve cover and installed the new timing belt. However after all...


When timing belts are installed, the normal position of the crankshaft is for #1 cylinder to be at TDC. Here is a picture of the timing belt routing and the timing marks.

chuckster57_44.gif

Jun 04, 2011 | 1992 Geo Tracker

1 Answer

Am Replacing Timing Belt On 1990 GEO Tracker 4x4 1.6 motor & am trying To Find where my timing marks should be ( belt broke )


most of the time there will be one mark on the crank pulley gear and the one on the cam pulley gear.usually a dot or a straight line.

Apr 17, 2010 | 1990 Geo Tracker

2 Answers

Need to install new timing belt on 96 geo tracker. is this a difficult job?


http://www.kick-fix.com/t-belt/16-fast-belt-install.html

or just see how i did mine.
every step.

Oct 07, 2009 | 1996 Geo Tracker 2 Door

2 Answers

The timing on my Geo Tracker is off.


Sounds like you have the timing belt off a notch or two. Set the crank pulley at the notch and TDC then remove the top screws on the belt cover and pull the cover back far enough to shine a light to check the cam pulley mark against the notch it should align with !

Aug 09, 2009 | 1996 Geo Tracker 2 Door

1 Answer

Aligning the crank and cam on a 1996 Geo tracker


Use this to align the sprockets, it's critical, you risk engine damage if it is not correct.119164a.jpg

May 01, 2009 | 1996 Geo Tracker 2 Door

2 Answers

WON'T START


Check compression if its good, Check timing

Dec 30, 2008 | 1996 Geo Tracker 2 Door

3 Answers

93 GEO TRACKER


Check all of the battery terminals and cables and check the wires on the starter/selonoid, start from the battery and follow the cable out and check all conections , clean and tighten them and if it still does it the starter/selonoid is bad and needs replacement...

pls do rate the solution

thanks.
regards.
fixya expert team

Sep 02, 2008 | 1992 Geo Tracker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...