Question about 1994 Jeep Grand Cherokee

2 Answers

Transmission need blueprint of all parts inside transmission to assmble it is a 42re can you help can not pay for any one to do this for me

Posted by on

  • Doug Smith May 11, 2010

    ha year and type of vehicle is the trans out of?



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can find the service manual for the 42re on ebay for anywhere between 10 to 30 bucks. most chassis service manuals from the car maker will have rebuild steps in is a good place to look for service manuals.with the book right there with you and following it closely, I'm sure you can get it back together. just take your time and go step by through the steps and look at the parts before you start.check yourself at different stages of building it up.really sucks to pull it back out to find out you cut a seal or forgot a checkball.

Posted on Dec 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 350 Answers

Hi if you not done one before you will not be successfull as even with a blue print it won,t show you the parts that need replacing and you will need special tools for correct assembley if your strapped for cash the cheapst way out for you would be a breakers yard second hand box trust me it is not a job for a do it yourshelf all the best someone who,s trying to save you time and money yates210456

Posted on Oct 14, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I'd like to rebuild transmission with a few new parts plus need blueprint on how to assemble it and will also need gasket etc. Can you help?

look online or some auto stores not all carry transmission rebuilt kits the kits run about 450 and up check with the kits if they come with a rebuild manual (most rebuild manuals about $45 -70) if it does not come with kit also will need some special tools which can be bought or some auto places rent ---biggest hurdle to start with will be the removal of the transmission

May 21, 2016 | Cars & Trucks

1 Answer

Automatic transmission 42RE valve body

Buy the ATSG Book for the 42RE at a local trans parts
supply house or on the internet

Your not a member or shop that uses ATSG, so you won't have
access to just the color diagram

Try the internet or maybe a data base at a repair shop

Aug 10, 2014 | 2000 Jeep Grand Cherokee Laredo

1 Answer

1994 jeep 42re transmission shifting problem

wow you know it's a 42RE
shocking here, to see that.
42RE has TCM, the only question is how to scan it and find it.
during the late 90s it was moved inside the ECU and became a PCM.
no need to post 23 years of normal service parts.
focus on 42RE, only it. please,
my guess is , not scanning the TCM blinds you to whats UP.>
read the real SM yet> on topic, chapter 21?
click ZJ and read.
ever seen topic , transmission in limphome mode (jeep limp-in)
this mode skips gears. (due to inputs to TCM wrong or other causes)
this box has an electronic governor.
it also does 4>3 downs shifts and TCC lockup on overheats.260f
lots of things it CAN do.
below 50F the TCC is disabled, to warm it up faster.
what does the OD lamp do.?
the lamp tells you when OD 4th gear is disabled, now in 3rd.
there are 2 speed sensor , one is a backup to main.
chapter 21 all this is clearly stated.
The PCM runs the trans, totally no separate TCM
says you need a DRB tool to scan this TCM section...
(my guess why you have no scans, and work blind,)

says there is a kickdown valve, so is the cable jammed full on
stuck in passing gear endlessly?

do not overfill the box. read how.
as some do , in a panic to get it to work , based on more is better.
its not. it foams up and DOOM sets

wish we had more symptoms.?
goes to 3rd gear after a short distance
does that mean is starts in 3rd gear stopped?
in DRIVE or LOW? and does REverse work, at all times?
1 range and 2 range ? work? at all times? (lever names)
chapter 21, page 12 table. see that?
elaborate all Tranny issues, hot /cold engine, and all modes of travel and direction, good and bad, (both matter @!!!!) called a shop test drive and gathering all evidence , and the 0D lamps actions.

here is the step your shop skipped. step 1.
what if the PCM (tcm brain) says
sensor, bad, TCM, VSS, or other errors, most do,
it is the not looking first, that is the problem.
why replace a tranny for one bad wire, ???? that was clearly reported to you, if you only looked, (scans)

drb-tmsiu2m2gbqj4p32vnuvvaj4-4-0.jpg I hope scans , are a REVELATION.

Mar 04, 2017 | 1994 Jeep Grand Cherokee

1 Answer

1994 jeep 42re transmission shifting problem

I'm having a problem with my tranny not wanting to shift automatically at all. Seems like a dead stop its stuck in low gear. Have to manually shift and does not go into overdrive. I have a 1993 Jeep Grand Cherokee. Can anyone help me cause I've swiched out throttle control sensor, filter change, new tranny cooler and heavy duty lines. I'm at a loss and scratching my head. Any advice would be greatly appreciated

Sep 22, 2012 | 1994 Jeep Grand Cherokee

1 Answer

Transmission filter rplacement how much fluid?

Automatic Transmission, 46RH Initial Fill..........4.1 quarts
Automatic Transmission, 44RE Initial Fill..........4.1 quarts
Automatic Transmission, 42RE Initial Fill..........4.1 quarts
Automatic Transmission, Total Fill
4 speed 44RE..........11 quarts
4 speed 46RH..........14.4 quarts
4 speed 42RE..........11 quarts

Jan 29, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Where is the speed sensor located on a 2000 jeep Grand cherokee v6 4.0 L?

Since you have the die hard, can not kill 4.0, I believe this mated with the 42RE transmission. My understanding It use's a single sensor (located on the overdrive gear case, over the park gear).The 42RE transmissions use a single sensor (located on the overdrive gear case, over the park gear). The 42RE transmissions use a single sensor (located on the overdrive gear case, over the park gear).

Oct 02, 2009 | Jeep Grand Cherokee Cars & Trucks

2 Answers

I have a 94 cherokee limited 5.2 v8. which transmissions are come

The 46rh is a hydraulic transmission as where the 46re is an electric transmission. With minor wiring you can replace the 46re with the 46rh but not the other way around. Your transmission would stay in limp mode and wouldn't shift out of 2nd gear. So the answer is no.

Aug 23, 2009 | 1994 Jeep Grand Cherokee

1 Answer

What other yrear transmissions will fit in the 95 grand cherokee with the 6cyl besides 95?

42RE: The 42RE four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines. 46RH: The 46RH four speed automatic transmission was used in 1993 to 1995 Jeep Grand Cherokees with 5.2L engines.

May 29, 2009 | 1995 Jeep Grand Cherokee

2 Answers

94 Jeep Grand Cherokee Transmission Problom

1994 is the same as 1997. parts are interchangeable

Dec 31, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides