Question about 2002 Chrysler Town & Country

3 Answers

I think my van has a clogged windshield nozzle. The wiper fluid comes out but doesn't even squirt high enough to hit the windshield.

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 412 Answers

First try to clean out the squirter nozzles.Take a very small wire, sometimes a staple works great, and stick it into the nozzle to clear any debris.Then try to spray it again.If this didn't solve the problem and the debris is cleared, then you either have a weak or blocked pump, which is located on the washer reservoir itself.Hope I could help!!! Rate me accordingly!! Thanks!

Posted on Oct 06, 2010

Testimonial: "Great info. I made it through step one and no fix. Being a female car moron, I'll have to research how to locate the pump. Many thanks for your help"

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Try running vinigar through the windsheild washer reservoir that or manually aim the nozzle higher up.

Posted on Oct 07, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Try unhooking the hose from just one spray nozzle, then see how far that line sprays.if it sprays lots higher the nozzles are clogged ,if there is not much improvement replace the washer pump usually located in bottom of washer fluid container.

Posted on Apr 18, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2004 envoy .the windshields washer squirting water on front windshield but not on rear .does it have a rear resivory?? What might be the problem


no same tank but two pumps possible clog of line and or nozzle pull hose off nozzle and try to see if fluid squirts if yes use a pin or air or clear nozzle if no fluid possible pump in washer fluid tank shot

Aug 02, 2015 | Cars & Trucks

1 Answer

Windshield washer fluid not spraying


Sounds to me part of the tubing is frozen shut from the pump to nozzle, nozzle may be clogged as well. The pump motor might run, but pump on the end faulty. Remove tubing from pump and see if it squirts out, if so replace tubing to pump and remove tubing from nozzle on hood or wiper, check to see if it squirts from there. IF it does then your nozzle is clogged with wax or ice.

Dec 16, 2013 | Hyundai Cars & Trucks

3 Answers

My 2006 Dodge Dakota windshield washer fluid does not spray. I checked the washer pump and it works. The fuses are all good. And the wipers work. When I press the windshield washer button inside the truck...


If the pump works, something should be flowing thru the hose to the spray nozzles.
And if the pump works, everything electrical is working.
How do you know the pump works ?

Apr 14, 2013 | 2006 Dodge Dakota

2 Answers

Toyota 4runner washer fluid does not come out


Open the hood and listen when some helper operated the "squirters".
You should hear a high-pitch whine that the washer pump makes.
No noise? Bad pump or bad wiring or corrosion at the terminals of the pump.
Noise heard?
Hoses are plugged up.OR the hose fell off the bottle and the bottle is empty.
You can use a small wire from a wire brush to un plug the squirt nozzles on the hood.Use pliers to feed the wire into the nozzles-you may poke your finger(sharp!).
Un plug the hoses that lead to the hood and apply air pressure to the hose from the windshield washer bottle.
Washer fluid is not toxic in small doses.

Feb 22, 2013 | Toyota 4Runner Cars & Trucks

2 Answers

Only one winshied wiper spray works


Check the rubber hoses to the sprayers. If they are on the hood they can come unplugged when you open it. Have a friend work the sprayers as you watch for leaks. An old toothbrush can be used to clean spray nozzles by scrubbing over the hole.

Feb 13, 2011 | 2004 Chevrolet Cavalier

1 Answer

05 chevy equinox windshield washer fluid is not coming out. It is coming out for the back windshield tho.. I think it is a fuse becausenothing seems to be frozen.


replace the nozzle sprayer for washer located on wiper or windshield cowl. nozzle is clogged up prob. has corroded.

Jan 14, 2011 | 2005 Chevrolet Equinox

2 Answers

Windshield washer will not squirt


Make sure you have water or windshield wiper fluid in the reserve (open your hood and add more, look for a blue plastic cap) if you hear it humming when you turn it on then the pump is working. Also check the little nozzles on the hood (one on each side) and see if they are clogged, stick a small safety pin into the holes and move it in and out to free up ant debris inside that may stop the water from squirting out

Nov 19, 2009 | 2008 Chevrolet Equinox

1 Answer

WINDSHIELD WASHER FLUID


Could be that the line is clogged, or the spray nozzle itself is clogged up a bit. Begin by inserting a piece of fine wire into the nozzle, that may solve your problem.

Feb 23, 2009 | 1998 Chrysler Sebring

2 Answers

Windsheild Wiper Fluid will not squirt on windshield


While you were filling the tank you may have disconnected the pump wires. If you can hear the pump activating when you use the switch then the pump may have gotten clogged , check for sediment in the tank.  For the person with the mustang - if its only coming out of one side then its a nozzle clogged or a pinched hose.

Dec 11, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

781 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...