Question about 1994 Ford F350 Crew Cab

Open Question

94 f350 duelly,abs and brake light comes on,when i kill truck they go off until i touch them again,,if i hook up a trailer and have to brake a little hard the rear brakes will lock up,,new brakes speed sensor,bled system several times!

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1993 F350 ABS light

i had a problem with my abs light one night i had a brake line behind the driver front tire broke and it was leaking out all of the fluid and the abs light came on i replaced the line and filled up the master cylinder and it went away so check your lines and master cylinder

Posted on Mar 30, 2009

  • 4 Answers

SOURCE: 94 f350 abs brakes slowly go to floorw/engine

you can "try " to take it off not recommended though you could severly screw up the computer or even kill yourself or someone elese. leave it alone and take it to a mechanic that knows abs

Posted on Apr 02, 2009

  • 5537 Answers

SOURCE: Can I bleed my 94 Crown Vic brakes with out

I have done the brakes many times on my own 1994 Vic and never had a problem. Just start at the farthest brake in back and work your way forward. The drivers side front is the shortest line. If you do have any problems, I use a Vacuum handheld bleeder pump.

They make it nice because the 4 ounce cup that comes with it holds enough discharged fluid that you get very little spill, if any at all. You can gravity bleed them too.

Posted on Nov 06, 2010

Testimonial: "You have built up my confidence. I have been told that I needed to take my Crn Vic to the Dealer because special equipment is required. "

  • 986 Answers

SOURCE: ABS and Brake LIght come on after driving about 80

you need to see what the fault is. its resetting itself

Posted on Feb 10, 2011

  • 382 Answers

SOURCE: I have a 2004 F350

you may have a style of t/signal switch that is notorous for going out, so if your t/s lights are working and you're trying to hook up trlr wires just install saddleback wiring connectors and wire pig tails and connect them to your trlr light harness and remember, always hook up all 4 wires. 1 goes to R, 1 goes to L, 1 goes to Tail Lights and the other wire goes to ground.

All turn signal lights have 2 wires going to them and one is always ground. Same with the tail lights. The body of the vehicle is always the ground point, so@@@ with the switch on and either t/signal on hook up the trailer light on that side then switch the other side on to hook them up.

Then shut them off the t/s and turn on the tail lights so you can hook them up. And Black is always GROUND...

The color of the trlr hook up wires you use in any position doesn't really matter just so you use the black for the ground. A last note: If your wire harness doesn't have 4 wires just make sure to hook up a ground wire from the frame to the trailer hitch or trailer so you can get a decent groung thru the metal. Don't put grease on the hitch if you want a good ground with no ground wire connected...

Posted on May 14, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

No power to trailer turn signals and brake lights. everything else works.

make sure to check the wiring on the trailer and to make sure that there is no damage or loose wireson the hook ups themselves. the wres could have come loose on your truck where they hook into the hook up for the trailer wiring. if any wire has come loose or the ground wire for the lights have come off, they will not work.

Feb 27, 2013 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

Have a 2008 f350 with integrated brake controller. with or without a traler connected the message center says no trailer when i use the brake controller manually it says trailer disconnected. when i hook...

Sorry no idea here iam sorry but i sawmy first F350 diesel manual for the first time in a car dealer yesterday ,what a monster and a bigger engine than a transcontinental volvo or scania 40ton truck .Well taken in awe i can tell you you need scaffolding to work on the engine ,no tilt cab .but iam guessing here could their be a sensor on the lift up flap for the plug socket by any chance ?

Oct 15, 2011 | Cars & Trucks

1 Answer

1995 F350 We pulled a trailer today and after we got a little down the road the ABS light started flashing. When we stopped for gas we could not get the shifter out of park without pulling the #18 fuse....

Well, it could mean that the emergency brake has not been fully released.The ABS system light is on if something has occurred within the ABS system. Something faulty may have happened there, get it checked out!

Aug 05, 2011 | 1995 Ford F350

1 Answer

All lights work and brake light at top works. brake lights on bottom left and right don't work. It was hook up to trailer wires connection. going down the road and when you turn on the right turn signal...

Check a few things...
- The bulbs
- Check for ground at brake lamp connectors
- Check your wiring at the connectors for power
- Check for another fuse blown
- Do not hook up the trailer until you fix the ground problem on the trailer
- On some models, there is a module to control the rear/trailer lighting system. There may be a problem in the module.

Jul 24, 2009 | 2000 GMC Safari

1 Answer

94 ford ranger blowing fuses when i turn on headlights

I would check the trailer light wiring to make sure it doesnt have any wires that are exposed or touching metal.Odds are that is what is causing the fuse to blow

Apr 23, 2009 | 2004 Ford Ranger

1 Answer

1993 F350 ABS light

i had a problem with my abs light one night i had a brake line behind the driver front tire broke and it was leaking out all of the fluid and the abs light came on i replaced the line and filled up the master cylinder and it went away so check your lines and master cylinder

Aug 18, 2008 | 1993 Ford F350

Not finding what you are looking for?
1994 Ford F350 Crew Cab Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides