Question about Chevrolet Suburban 1500

1 Answer

Sway bar link replacement instructions for 1996 suburban

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

You didn't say if your vehicle is 2WD or 4WD but in this case both are the same to replace.

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528008f597

Basically you remove the nut from the sway bar link bolt, then remove the bushings, washers, and spacer as you withdraw the bolt. Reverse to install.

Posted on Oct 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace sway bars on a 1995 olds 88 royale?


you will need to disconnect the sway bar from the sway bar links(in most cases you might as well replace the links as well since they may snap while trying to remove them). You will then remove the sway bar bushing caps 2 bolts on each of the 2 caps and lower the sway bar. Is the bar cracked? should not require replacing if it isn't cracked. the rubber bushings and links do wear over time and yes the bar can crack.

Feb 17, 2011 | 1995 Oldsmobile Eighty Eight

1 Answer

Have a 1996 explorer sport with 200k. Daughter said the truck started to drive "like a boat tossing and turning" at highway speed. Front end was rebuilt not long ago. shocks seems fine and...


Yes this sounds like A sway bar condition and yes you can Replace just the links and bushings. I would not replace the sway bar its self unless that is infact what broke. I hope this helps you out. i would appreciate it if you would rate me.
thank you
Aaron

Nov 15, 2010 | 1996 Ford Explorer

1 Answer

Steering problem. It seems loose and allows the van to drift


check the sway bar links. the sway bar is the long solid bar that goes to each tire up front. the links are what connects the bar to the lower control arm. this is what controls the vehicle from swaying or drifting

Jun 22, 2010 | 1996 Dodge Caravan

1 Answer

Instructions for replacing sway bar on chevy venture


Not that hard using 13mm socket and wrench remove the 2 outer end links at the lower control arms.Then the covers and isolators on the subframe remove front sway bar.Now would be a good time to replace end links because bolts rust and get thin inside metal spacer.

Feb 11, 2010 | 1999 Chevrolet Venture

1 Answer

Sway bar


Incredibly easy. Two bolts hold each sway bar bracket to the frame, the bushing is inside. The end links are a bit trickier, however, not rocket science.

Jan 16, 2010 | 1996 Jeep Grand Cherokee

1 Answer

How to replace 2000 mercury sable sway bar links


It does require loosening of the sway bar mounting bolts. If you don't there is no way you will get this job done.Good Luck.

Aug 22, 2009 | 2000 Mercury Sable

2 Answers

Need help finding and installing swaybar endlinks


If your driving a 96 just look at tire wear if it is ok .. then you are probably doing ok .. That year is known for rough road rattles ... Just watch tire wear. tells you alot if your steering is tight also.

Jan 25, 2009 | 1996 Mercury Sable

1 Answer

93 caprice


besides changing the bushings, did you check the sway bar itself or the degree of the linkage bolts, in time seeing as it's 16 years old now it may have been stressed and bent, buying smaller linkage bolts with stiffer bushings may help tremendously...worst case scenerio you may have to replace the sway bar itself.

Dec 04, 2008 | 1996 Chevrolet Caprice Classic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...