Question about 1998 Chrysler Cirrus

Open Question

Dome light doesn't work, keyless entry doesn't work, electric door locks don't work, and the radio doesn't work. This all occurred after I installed a new AC and heater controller unit. Everything listed worked before that. Did I knock something loose or is there a fuseable link or or something up in there?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
redgto046m
  • 10 Answers

SOURCE: 2004 Chevy Impala Keyless Entry System Stopped Working

Do the power door locks work when used with the switches located on the interior doors? If so, then it sounds to me like you got a problem with your key fob. Probably a dead battery in it.

Posted on Dec 28, 2008

Ad
  • 10 Answers

SOURCE: radio, dome lights, and keyless entry not working (Fuses Ok)

Take the vehicle to Autozone and they will do a free computerize check of the vehicle.

Posted on Jan 19, 2009

  • 1 Answer

SOURCE: keyless entry for 05 Kia Sportage

i have a kia optima my keyless quit working to.I took it back to the dealer and the said it was common on a lot of kia models.They replaced the module for the keyless remote,that seams to have fixed it.

Posted on Mar 21, 2009

  • 1 Answer

SOURCE: ''1992 Cadillac DeVille keyless entry doesn t always work''

your vallet button is pushed mine is in thhe glove box turn it off i thought i needed a battery 2 good luck

Posted on Apr 01, 2009

  • 41 Answers

SOURCE: my power windows and dome light and door locks

what year? But the trans shifting should have nothing to do with door locks

Posted on Apr 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 explorer door locks not locking from door switches


This is not a good thing. Ford uses a computer called the GEM and that means General Electronics Module. It controls:
  • Low Coolant Indicator On Cluster
  • Brake Indicator on Cluster
  • DRL - Control
  • Wipers
  • AutoLamps
  • Rear Defrost
  • Interior Lamps(dome)
  • High Beam Indicator only (cluster)
  • Low Coolant indicator
  • Key-in Buzzer
  • Seatbelt indicator only (Cluster)
  • Trunk Pop Relay
  • Power Locks
  • Door Ajar Sensors
  • Door Keyless entry pad
  • Remote Keyless Entry
  • One Touch Down (power window)
  • Air Bag Tone
  • Anti Theft (perimeter Alarm) (SEL, or SE(s) with mods)
  • Lift gate ajar (wagon)
  • Liftgate Pop
  • Accessory Delay signal (accessory that work after engine off, prior to door ajar)
  • Battery Saver Relay signal (accessory that work after engine off, 15 mins) Map lights, vanity mirrors

They are located behind the radio in the dash and they are $$$ about 600 USD.

Jan 27, 2014 | 2008 Ford Explorer

1 Answer

2005 Honda Element radio and keyless entry stopped working


they are all easy fixes with skills and tools.
in this case a $10 voltmeter
when you do all that is battery voltage at 12.6v?
and all fuses good
and engine runs perfectly for over 1 minute?
and the idiot lamps are all happy, running,
CEL not glowing running?????????????

Jan 13, 2014 | Honda Element Cars & Trucks

1 Answer

2008 cadillac cts key fob not working


Testing would need to be done , scan tool hooked up checking DTC'S - diagnostic trouble codes . View data etc...
Keyless Entry System Description and Operation - Active
The keyless entry system is a vehicle entry device. The keyless entry system is used in conjunction with the door locks to unlock the vehicle. Keyless entry will lock/unlock a door or open the rear compartment lid when a corresponding button on the keyless entry transmitter is pressed. This is accomplished by the transmitter sending a radio frequency to the remote control door lock receiver (RCDLR). The RCDLR interprets the signal and activates the requested function via a serial data message. A low transmitter battery or radio frequency (RF) interference from aftermarket devices, such as 2-way radios, power inverters, computers, etc., may cause a system malfunction. High RF traffic areas, such as gas stations that use pay-at-the-pump RF transponders, may also cause interference that could lead to a malfunction. Keyless entry allows you to operate the following features:
• Door lock/unlock
• Rear compartment lid release
• Illuminated entry lamps
• Panic alarm/Vehicle locator
• Remote vehicle start

Your best bet , take it to a qualified repair shop . Dealer

Feb 18, 2018 | 2008 Cadillac Cts

1 Answer

Comfort access failure.


Sounds like they might have missed plugging the door harness in to the body, or maybe left a ground unhooked.

Apr 24, 2013 | 2002 Ford Excursion

1 Answer

2008 HHR Remote Starter not working


Is this an issue with all 2008 HHR remotes??? Highly doubtful , probably the vehicles keyless entry system . Taking the vehicle to a qualified repair shop an having the keyless entry system checked for DTC'S - diagnostic trouble code's . Do you know what a DTC is ?
The keyless entry system is a vehicle entry device. The keyless entry system is used in conjunction with the body control module (BCM) to remotely activate certain vehicle features. Keyless entry will lock/unlock the doors, or release the rear compartment lid when a corresponding button on the keyless entry transmitter is pressed. This is accomplished by the transmitter sending a radio frequency to the remote control door lock receiver (RCDLR). The RCDLR interprets the signal and activates the requested function via a serial data message to the BCM. A low transmitter or vehicle battery or radio frequency (RF) interference from aftermarket devices, such as 2-way radios, power inverters, computers, etc., may cause a system malfunction. High RF traffic areas may also cause interference that could lead to a malfunction. Keyless entry allows you to operate the following components:
• Door locks
• Liftgate lock
• Remote rear doors (Panel only)
• Vehicle locator/panic alarm
• Illuminated entry lamps
• Remote vehicle start
The keyless entry system has the following components:
• Keyless entry transmitters
• Keyless entry antenna
• 2 Way Advanced Remote Start RCDLR
• BCM

Guessing will not fix this .

Jan 12, 2018 | 2006 Chevrolet HHR

1 Answer

2002 Ford F350, Door Ajar Light on constantly, Auto Locks don't operate, Auto Headlights don't operate(only manually), Dome Light does not operate when opening doors, Remote does not work. All


Your keyless entry system is going bad and you need a battery for your keyless entry system once you replace your battery with the new one thing should work properly

Feb 06, 2018 | Ford Cars & Trucks

1 Answer

Keyless entry blinks dome light and does nothing else


The remote is fine - your problem is the lock actuators in the doors. They're a bit of a pain to replace - so, you may want to have a professional do it.

May 03, 2009 | Dodge Dakota Cars & Trucks

1 Answer

Keyless entry and dome light


GM used a ground buss under the carpet near the drivers door sill. It gets wet and corrodes causing electrical problems. You can clean it up with steel wool after disconnecting the negative battery terminal. I can't remember if it's near fuse pannel or under the drivers seat on Chevy trucks.

Feb 06, 2009 | 1996 Chevrolet Tahoe

1 Answer

'97 Honda Civic dome lights and keyless entry problem


The signal from all the door switches is fed to the factory radio. From the radio, the signal goes to the dome light. When the radio is removed, the dome light does not work since the circuit is "cut".
Fortunately, there is a very simple workaround this problem. If the car does NOT have a factory alarm/ keyless entry, all you have to do is tie two wires together.
There are two green plugs. Get to the one that is plugged into the radio (if you have both green plugs going into the radio, then you DO have a keyless entry system).
Tie together the Green/Black (at the corner of the plug) and the Green/Red (3rd pin, opposite corner, same row).
Before tying the wires together, test both wires. With the radio plugged in, both wires should get a ground when a door is open and nothing when the doors are all closed. Once you have determined that they are in fact, the correct wires, unplug the green plug from the radio. If the dome light still works, you do not have to worry about it. If it doesn't, temporarily jump with a wire both pins at the plug. If the dome light functions correctly, then you can permanently jump the wires together. The preferred way to do this is to strip some insulation on the wires, solder a jumper wire and insulate with electrical tape.

Jun 26, 2008 | 1997 Honda Civic

Not finding what you are looking for?
1998 Chrysler Cirrus Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...