Question about 1998 Jeep Cherokee

2 Answers

Where would i find the headlight relay and/or headlight fuse in '98 jeep? my headlights just stopped working both high and low beams.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 32 Answers

That wont be a fuse. yud have to blow 2 fuses for that to happen. (high and low fuse)

i would look more closely at the ground and power to the circuit, especially if they were both operating properly before.

Posted on Oct 06, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 8,270 Answers

Engine compartment

where would i find the headlight relay and/or - 9409435.gif

Posted on Oct 06, 2010

  • Jeff Turcotte
    Jeff Turcotte Oct 06, 2010

    there is one 30 amp fuse that runs all the headlights

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Jeep Headlights not working. High beam works

had the same problem on my 92....check under the hood on the drivers side,towards the front,there is a "junction box" with all of the lighting wires connecting from the switches to the lights.My wires were all corroded inside,so I cleaned the ends and bought a new box from the local electronic supply store.The problem has not come back.

Cheers

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a 12V output from integration relay going to headlight switch of 98 sienna LE. no headlight both hi and low, but flash headlight is working.


There is a fuse for both the low and high beam headlights.
There is a relay for both as well.

The headlight switch feeds the relay.

Thank you the excellent symptom of the problem.

Yes,12 V. goes to the headlight switch.

Mar 09, 2013 | 2000 Toyota Sienna

1 Answer

98 ford lariat. Headlights stopped working. running lights come on and brake lights and turn signals. checked all fuses under dash and under hood, pulled out headlight switch and it looks fine. note only...


Is this both the high beams and low beams that do not work ?

If you checked all 3 fuses with a meter ( with the headlamp in Low position for both low beam fuses or in high for the high beam fuse ), the next items to test are the MFS ( MultiFunction Switch ) and the main headlamp switch ( test not look at it ).

The main headlamp test chart
568bbbb.jpg

The test chart for the MFS
4fc6f66.jpg
097ea29.jpg

Oct 25, 2010 | 1998 Ford F150 Regular Cab

1 Answer

Headlights went out. Replaced bulbs and switch and still lights don't work. Fog lights and high beams work? What else can work?


If high beams work and low beams do not, then it is probably the high/low relay. It is part number 15016745 and has four prongs. To test if your relay has gone bad locate the relay in your fuse box. There will be two of these relays located next to each other. One controls the low beam headlights and the other the cooling fan. Swap the relays and check your low beam headlights. If the low beams work you have a bad relay.

Sep 20, 2010 | 2006 GMC Envoy

1 Answer

I have a 2005 dodge caravan. the headlights have


On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

May 28, 2010 | 2005 Dodge Caravan

1 Answer

98 Jeep Grand Cherokee, The low beam lights went out, the high beams work OK. Has anyone found the common problem yet with this issue? 101,000 miles.


If your headlight switch is the type you pull out, left of the sterr column on dash, switches tend to go bad, I replaced mine and only had 50,000 miles. try checking headlight relay in engine fuse box first.
.

Mar 02, 2010 | 1998 Jeep Grand Cherokee

1 Answer

My 1992 Corolla DX headlights won't come on! I have changed the fuses and the bulbs. The relay clicks when turning the switch and the wiring seems to be in good condition but I am no electrician. The...


Power flows from the battery to the main fuse. Then it flows to the control coil and contact side of the headlight relay. When you turn on the headlights, the headlight switch provides ground to the control coil in the headlight relay and that operates the contacts. The contacts allow power to flow to the right and left hand headlight fuses. Power flows to the headlights. The headlight switch is what provides ground to the high and low beams on the headlights.

To diagnose, remove the headlight relay. Using a voltmeter, check for battery voltage on terminals 3 & 4 in the socket with the key in the RUN position. Then turn on the low beams. Test for good ground on terminal 1 in the socket. If you're not getting ground, then you've got a problem with either a bad headlight combo switch or a bad ground. If you get good ground on terminal 1, reinstall the relay, turn on the low beams and test for power in the headlight sockets. If you get battery voltage, that confirms you've got good fuses and wiring up to that point. Next, check for good low beam ground on the red/green wire in the bulb socket. If you're not getting good ground, it's either a bad combo switch or bad ground from the combo switch. Then turn on the high beams and check for good ground on the red/yellow wire in the bulb sockets.

It wouldn't hurt to clean the ID ground on the left side of the instrument panel, but based on everything you've said so far, this sounds like a bad combo switch

Jul 26, 2017 | 1992 Toyota Corolla

1 Answer

98 jeep wrangler headlights wont turn on


I would check your headlight relay switch that is located in your steering colum

May 19, 2009 | 1998 Jeep Wrangler

1 Answer

05 Jeep Wrangler High Beams Work, Low Beams dont


There are no relays for the headlights. Your problem could be from the headlight switch. You would have to check and see if you have power coming out of the switch on the low beam side. Check with a test light.

Dec 15, 2008 | 1997 Jeep Wrangler

Not finding what you are looking for?
1998 Jeep Cherokee Logo

783 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...