Question about 2001 Ford Escape

Open Question

How to change a shifter cable on a 2003 Ford Escape ?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fknstart
  • 404 Answers

SOURCE: Replace Shifter Cable Standard 2003 Ford Focus

most things are easy to replace ,you may have to take the consol out,

Posted on Jan 06, 2009

  • 6 Answers

SOURCE: headlight went out in 2003 ford escape i have

you have to remove the whole headlight assembly, then pop off the front cover pull the old bulb out and put the new one in. reverse the process to re-install. there is a small plastic tab on the topfront of the headlight assembly, that is what you need to release to get the clear cover off and get inside.

Posted on Oct 07, 2009

franktilt
  • 403 Answers

SOURCE: how do I replace 2001 ford escape shifter cable

autozone.com sign up its free then click on repair manuals you will find all of your info there....good luck

Posted on Jun 04, 2010

  • 312 Answers

SOURCE: Ford Escape 2003. Engine suddenly overheat.

Engine over heating can be caused by a number of things. When you say the water pump and radiator appear to be ok I am also guessing that you checked the coolant level to make sure it is normal.

If the level is low then you obviously have a leak. Insufficient coolant circulating will not cool the motor properly because it won't be able to draw enough heat out. If the level is normal then you need to check the thermostat to make sure it is opening properly. To do this, run the motor to temperature and check the top and bottom hoses. They should both be hot and firrm once the thermostat opens meaning the circulation loop is operating properly. If the top is hot and firm and the bottom is cold/soft or collapsed then the thermostat isn't opening.

If the thermostat is operating properly then you ned to look for some other obstruction or cause for coolant loss. Check the head/intake gaskets, hose connections, hoses, over flow tank, radiator fins, radiator side tanks etc..

Good luck.

Posted on Jun 10, 2010

Testimonial: "Thank you for your quick response. I will get the head/intake gasket checked."

alicantecoli
  • 22156 Answers

SOURCE: Ford Escape 2003 Have good battery charge but

New battery needed or a trickle charger when vehicle not being used

Posted on Jan 03, 2011

Testimonial: "Pushed it out our narrow drive and jump started it. Off to get battery tested/buy a new one. Thanks for the quick response."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 ford escape stalls when put in park, but not in drive


Does it go into the correct gear if you downshift to 2nd or 1st(shift cable misadjusted)? Could the DTC switch be bad on the side of the tranny? May have to ask Ford to look at it.
I suppose it could be an electrical short at the column,or is it a floor shifter? don-ohio (:^)

Dec 05, 2016 | 2003 Ford Escape

1 Answer

2003 Ford Escape: key stuck in the ignition. I was able to remove the key after I pulled out fuse #11 (key interlock) but I need a proper fix. What needs replacing?


have the park/ neutral positions check for adjustment as the indicator and the actual park switch may be out of alignment

Jun 23, 2016 | 2003 Ford Escape

1 Answer

Frequently will not shift out of park - I usually have to turn the engine off several times and suddenly it will go into gear - what is going on?


Ford Escape Questions - shifter stuck in park - CarGurus

www.cargurus.com > Questions > Ford > Escape

CarGurusFeb 2, 2015 - shifter stuck in park - Sometimes my shifter is hard to get out of park. what would cause this, and how would I fix it?

Ford Escape Questions - SHIFTER - CarGurus

www.cargurus.com > Questions > Ford > Escape

CarGurusOct 28, 2011 - 1 out of 1 people think this is helpful. ... 2011 FORD ESCAPE WILL NOT GO IN TO GEAR DEALER SAID COFFE SPILLED IN IT . ... shifter stuck in park 13 answers ... Other times (and it's getting more often), I have to push and push (and keep pushing) the gear shifter ... 2012 Ford Escape XLT For Sale.

'01 Escape Stuck in Park; safety interlock - Ford Truck ...

www.ford-trucks.com > ... > Escape & Escape Hybrid

Dec 29, 2015 | 2012 Ford Escape

1 Answer

I changed my ignition on a 2003 ford escape and


This may or may not work: Unhook negative battery cable for 15 minutes. Re attach and try. This resets the processor. Engine will run funky for 10 miles or so if it works.

Sep 22, 2014 | 2003 Ford Escape

1 Answer

My 2005 ford escape shifter button gets stuck and it's hard to get out of park and then my key is also hard to get out of the ignition after I turn car off Please help


You have a shift interlock problem this cable tends to bind internally a replacement of the cable may be necessary

Mar 06, 2012 | 2005 Ford Escape

1 Answer

2001 ford escape shift column stuck in Park and the brake lights are out


Check your shifter cable. I'm dealing with something similar. I actually just need the rubber busher and not the entire cable. My neighbor is a mechanic...thank God...and from what I hear it's an easy DIY. Good luck.

http://www.escape-central.com/1forum/showthread.php?s=&threadid=20977&highlight=shift+cable

May 04, 2011 | 2001 Ford Escape

1 Answer

Where is the neutral safety switch on a 2003 ford escape


at top area of transmission where the shifter cable attaches to lever and shaft @ base of shaft is gear selector/nuetral safety switch remove nut on end of shaft and usually 3 - 8mm screws holding switch down ,unplug electrical connector,remove lever from shaft and raise switch up and out

Jul 08, 2010 | 2003 Ford Escape

1 Answer

Misfiring escape 2003


Check timing/ timing belt. May have jumped one cog.Remove and replace.

Jun 07, 2009 | 2003 Ford Escape

Not finding what you are looking for?
2001 Ford Escape Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...