Question about Nissan Pickup

Open Question

"ignition signal" code 1997 nissan ka24e engine 2.4 liter 4x4 pickup. what part do i need to replace?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

keemo68
  • 1263 Answers

SOURCE: nissan pickup 1994

the pcv valve is a one piece part(positive crankcase ventilation) its located on the valve covers and has a hose attached to it that goes to the air intake hose of the air breather. this is a simple installation. the pcv valve just slips into a grommet in the valve cover and can be pulled out and pushed back in with out any tools. please rate this... thanks

Posted on Sep 28, 2008

  • 20 Answers

SOURCE: firing on 2 cylinders

check the fuel injectors

Posted on May 27, 2009

  • 80 Answers

SOURCE: My 1997 Nissan 4x4 pickup 2.4L 4 cyl manual

this could be caused by several different things.check E.G.R.vave to make sure its not sticking.Check fuel system,start with testing fuel pressure then filter and pump check every vacuum line carefully to make sure there is no cracks or leaks.I assume your computer is not setting a code so that could possibly eliminate your MAF sensor.Let me know whats up and I will check back with you.If this does not work I have more answers.

Posted on Oct 14, 2010

  • 158 Answers

SOURCE: looking for the firing order

1,3,4,2

Posted on Feb 28, 2011

ZJLimited
  • 17970 Answers

SOURCE: I have a1997 nissan 4x4 pickup with a ka24e bad

Its so rare, check this firing order for 1997 Nissan D21 Hardbody SE King Cab 2WD 2.4 liter DOHC L4 (KA24E) and 1995 Nissan D21 Hardbody 2WD 2.4 liter DOHC L4 (KA24E)...

zjlimited_232.gif


zjlimited_801.jpg

Fig. 2: KA24E Engine Engine firing order: 1-3-4-2 / Distributor rotation: counterclockwise

Hope helps.

Posted on Mar 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 Nissan pickup 2.4 head torque sequence


From repair manual for 1996 KA24E 2.4L engine:

Number bolts as follows:
Exhaust side, front to rear - 8, 6, 1, 3, 9
Intake side, front to rear - 10, 4, 2, 5, 7

Tighten bolts in numbered sequence, five steps.
Step 1 - 22 ft-lbs
Step 2 - 58 ft-lbs
Step 3 - loosen all bolts completely
Step 4 - 22 ft-lbs
Step 5 - 54-61 ft-lbs

Oct 19, 2014 | 1997 Nissan Pickup

1 Answer

87 nissan d21 transmission specs


Hey Anon, You are pretty much stuck with what you have now..the only thing else you could change is the rear gear ratios... Just make sure everything works and let 'er rip.. no need to do anything...

Jun 19, 2017 | 1987 Nissan Pickup

1 Answer

1987 nissan d21 5 speed trans specs


I would install smaller diameter tires and wheels to do the tweaking .

Jan 23, 2013 | 1987 Nissan Pickup

1 Answer

How do I adjust the rocker arm bolts for the valve lash on a 1985 Nissan 720 pick up Z24 engine


Guys he has a Z24, Not KA24, Z24 for one, Is carbed and has older lifters and valves. They need to be tuned to spec within a certain specific limit and the cams must be rotated in certain positions when doing different valves, etc... Shouldnt take very long normally and its not a hard process but if you have a tick, you really should get it checked out. Btw, the Z24 engine's idle isnt controlled by ecu at all or else the carb wouldnt need an idle adjustment screw.

May 27, 2012 | 1985 Nissan Pickup

1 Answer

My 1997 Nissan 4x4 pickup 2.4L 4 cyl manual transmission KA24E Engine cuts out when it warms up and dies at intersections. I have replaced the front O2 sensor which helped for two days but it is acting up...


this could be caused by several different things.check E.G.R.vave to make sure its not sticking.Check fuel system,start with testing fuel pressure then filter and pump check every vacuum line carefully to make sure there is no cracks or leaks.I assume your computer is not setting a code so that could possibly eliminate your MAF sensor.Let me know whats up and I will check back with you.If this does not work I have more answers.

Oct 04, 2010 | 1997 Nissan Pickup

1 Answer

Need engine size in Nissan pickup


It is either a Z24i, or a KA24E. You should find the identification number on the left side of the block at the rear. It should say what size it is.

Jun 29, 2010 | 1991 Nissan Pickup

2 Answers

Ka24e locate the crank angle sensor


The sensor is located in the bottom inside of the distributor.

Jun 30, 2009 | 1997 Nissan Pickup

1 Answer

Firing on 2 cylinders


check the fuel injectors

May 27, 2009 | 1997 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...