Question about 2000 Chevrolet Blazer

2 Answers

I cant get my emergency brake to release; the pedal is all the way down and wont move.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 4,340 Answers

Try pushing on the pedal while pulling release.

Posted on Oct 06, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

You have to check many things
First brake system pips leak
Master cylinder
And brake oil
Also brake cylinder kit

Posted on Oct 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How too release the emergency brake foot pedal when the cable is broken?


About 73,400 results (0.87 seconds) Search Results

    Parking brake release cable snaps - Chevy Avalanche Fan Club of ...

    chevyavalanchefanclub.com > ... > Problems: Brakes

    24 posts - ‎16 authors
    Went to release the parking brake on my 04 and the cable snapped. ... More like the end cap coming of the cable that attaches to the foot pedal. ..... Then I released the parking brake, pulled out the broken release cable/handle assembly, ...

    How To Install Repair Replace Parking Brake Release ...

    ? 5:54
    https://www.youtube.com/watch?v=qx0oGfV62NQ
    Jun 23, 2011 - Uploaded by 1A Auto Parts
    How To Install Repair Replace Parking Brake Release CableHandle ... or replace a broken or worn out parking brake release cable handle.

    Emergency Brake Pedal Assembly & Stuck Brake Cable ...

    ? 10:13
    https://www.youtube.com/watch?v=0jYfvthBzhU
    Apr 17, 2014 - Uploaded by corgLLC
    Emergency (Parking) Brake Pedal Assembly & Stuck Emergency (Parking) Rear Brake Cable The emergency ...

    E-Brake Cable Broken? Stuck Emergency Brake... Help Please ' Chevy ...

    www.tahoeyukonforum.com > ... > Engine & Drivetrain


Jan 25, 2016 | Cars & Trucks

1 Answer

How do u release the emergency brake in a pacifica


Press the parking brake pedal down further, keep pressure on it then pull the release handle out and hold it out then let you foot off the pedal.

Feb 18, 2015 | Cars & Trucks

1 Answer

Emergency brake not working after changing rear brake shoes on a 1990 gmc pickup 1500 series? And how do I release the emergency pedal from the floor? It won't release when you step on it?


Was the brake shoes replacement a DIY or professional job. If DIY, are you certain that you reassembled the brakes properly? Does the truck move at all? Does it feel as though the e-brake is applied? With the e-brake pedal to the floor, the truck should not move freely when the accelerator pedal is depressed. The emergency brake assemblies on both rear wheels are connected to a cable assembly that ultimately leads to the e-brake pedal. The cable has an adjustment point and a spring tensioner to prevent slack in the cable. First, crawl under and physically check the cable tension. If it's loose, either the cables are not connected to the rear wheels' brake assemblies, not connected properly, or the cable and/or pedal is damaged/broken. If the cable is tight - overly tight, but the e-brake is not holding the truck from moving, the e-brake levers attached to the shoes inside the brake drums are likely not installed correctly. Double check your installation and consider replacing the e-brake cable (as a precaution). As for the pedal, you may have to remove it in order to get the ratchet-locking mechanism to release.
Of course, if this was a professional job, call the shop and have them make it right. Good luck.

Oct 07, 2013 | Cars & Trucks

2 Answers

How do you get the E brake off?


I don't know if I can explain this correctly but I'll try. Some cars that have a foot peddle that activates the emergency brake when foot peddle is compressed. If there is not a brake release handle directly above the peddle, it might have a kind of spring release. Try pressing down on the peddle hard and then move your foot off and out of the way and it might spring back and release that way.

Jul 26, 2010 | 1996 Cadillac DeVille

1 Answer

Parking brake cable broke, 94 chevy s10 stuck, how do you release emergency brake and do i fix it


If it broke it should have released itself, the system is a simple cabel pully system, if its broken the cable cant have the tension to keep the brake engadged. if you want to release the handel pull the release and physicaly move the pedal.

Feb 22, 2010 | 1994 Chevrolet S-10

1 Answer

Emergency brake locked after pull release handle


handbrake jammed on somewhere ,could be front cable ,because the rear cable is pulled by the compensator so if it was the rear one then i would expect only one cable siezed and that is normally the kerbside one.

Oct 23, 2009 | 1995 Ford Crown Victoria

1 Answer

How do you release emergency brake 94 dodge dakota after used? Brakes went out used emergency. Now i can't release them.


either there is a release handle or you may have to press the pedal down further and it should auto-release. Are you up north? salt? rusty cars? if the pedal is UP but the brakes are still applied, then the cables are rusted /siezed and you will need new cables and rear brake service to have brakes again.

Oct 06, 2009 | 1994 Dodge Dakota Club Cab

1 Answer

Emergency brake stuck, pedal release broken


What happens is the brake cables rust inside the cable sheath and then they won't slide easily. There's no good fix for this other than replacement. It's not easy to even find where they are stuck.It might be possible to find the end of the cables at the back wheels and pull the cables back---to release the tension

Apr 26, 2009 | 1994 Pontiac Grand Prix

1 Answer

On my 2003 Chevy Suburban, the emergency brake won't release.


there is a cable running from handle to brake assembly it is probably broke there is a release lever under there on brake about a one inch lever hold down on brake and move this and let up on pedal.

Nov 20, 2008 | 2006 Chevrolet Suburban

1 Answer

Emergency Brake


What model car? On my Cadillac the problem was the vacuum line to the release valve at the parking brake pedal. The problem can be the vacuum line, the release valve or the vacuum actuator for that release valve. Mine was on the steering column.

Oct 24, 2008 | 1989 Cadillac Sedan DeVille

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...