Question about 1991 Honda Accord

1 Answer

91 accord alt belt

How do u replace a altanater belt on a 91 accord ex coupe?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 241 Answers

  1. Apply a force of 100 N (10 kg, 22 lbs) and measure the deflection between the alternator and crankshaft pulley. Deflection: 10 - 12 mm (0.39 - 0.47 in)
NOTE:
  • On a brand-new belt, the deflection should be 4.5 - 7 mm (0.18 - 0.28 in) when first measured.
  • If there are cracks or any damage evident on the belt, replace it with a new one.
    1. Loosen the through bolt and adjustment locknut.
    2. Turn the adjusting bolt to obtain the proper belt tension, then retighten the nut and mounting bolt.
    3. Recheck the belt deflection.

Posted on May 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 honda accord ex driver seat belt won't retract back into lock position


Take the cover off the belt retractor and see if anything is lodged in the retractor, if not then the belt must be replaced, attempt no repair.

Sep 30, 2016 | Honda Cars & Trucks

2 Answers

Location of fuel filter


on the frame on the drivers side

Mar 03, 2014 | 2009 Honda Accord EX

1 Answer

91 honda ex, passenger front seat belt is not working and the light in the dash board keeps lit, I have check the fuses for it, and all the connection to the belt and it seems all intact...any advise?


Your 1991 model Accord has automatic front retracting shoulder belts and, more than likely, the power retractor motor has gone bad on the passenger side front. If the shoulder seat belt is not in the retracted position, up close against the seat, when the car is running, the seat belt light will stay lit on your dash. Have the seat belt motor inspected and replaced if necessary.

Oct 18, 2010 | 1990 Honda Accord

1 Answer

The engine vibrates, makes the dashboard and doors vibrate a lot when it comes to a stop. And it gets even worst when i turn on the A/C, but when is on drive is fine it dosn't vibrate. ONLY when IT comes...


If you have had the timing belt changed they might not have replace the balancer belt and it may have snapped. Or, the balancer belt might not be set correctly.

May 20, 2010 | 1995 Honda Accord

1 Answer

I have a big problim with mt 91 honda accord my battary wount charge i put new altanater new battary all cables are great but it wount seem to charge the battary if i charge the battary it well last up to...


With the engine running are you getting any voltage off the alternator? check with a multimeter. Check voltage at battery while running should be 13 volts or more.

May 16, 2010 | 1991 Honda Accord

1 Answer

Automatic Seat Belt. in Honda Accord 91 EX


check fuses or see if something might have got jamed in the track and also try movin the part where the seat belt moves back and forth to see if the motor is dying

Dec 12, 2009 | 1990 Honda Accord

1 Answer

I have problem mi 91 honda accord ex coupe has vibration when im driving 55 & up im replaced l/f axle,control arm & balance the tires


Is there vibration in steering wheel? Check for bent wheel then check axle...again. Remans are not always good and new ones are just a bit more expensive. Also, check the output shaft bearing for excess play. Also try rotating tires to confirm it's not there.

May 10, 2009 | 1991 Honda Accord

1 Answer

Speedo issue


The vehicle speed sensor is failing. It is a small component bolted to the top of the transmission with two 6mm bolts. Easy to replace once you find it.

Jul 13, 2008 | 1991 Honda Accord

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...