Question about Mitsubishi Lancer

1 Answer

My Mitsubishi Lancer 2001 Coupe always got the problem which is the tacho,speedometer, fuel indicator, temperature indicator are not working. They all working only in the morning. So after I drive the car a while they will all turn off. Thanks.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am having the same problem, please let me know if you can find a solution. Thanks.

Posted on Oct 30, 2010

  • Chetsme Oct 30, 2010

    I am having the same problem, please let me know if you find the solution.

    Thanks.

  • Keggy1 Mar 30, 2011

    I know this is 5 months old but it is the first google result... Same problem on lancer 1998 ce model Just fixed it... If your hand brake light is also not working- check all flexable printed circuit board copper strip between the bulbs at the bottom of the cluster. its on the negative side but neeeds to go back to the cluster plug in connection so you have to bridge the crack with some wire. (cracked circuit was soo small i missed it the first two times. so Take all bottom bulbs out lift flexable circuit board out from little slots then check carefully. took me 2 weeks but finally its done :) Good luck.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do you mean cluster contacts bad !Whats the solution?


Remove the speedometer head unit, and check the soldered joints on the back. It's a common problem with these and some Chrysler products. "Randomly" is when the crack closes and makes contact, like if you hit the top of the dash and it starts working again. The speedometer head cluster.

Feb 24, 2010 | 2002 Mitsubishi Lancer

1 Answer

Mitsubishi lancer coupe 1993 broken indicator


Check the bulbs, if you haven't already, if they are ok it's most likely the flasher, which is mounted on the fuse block under the dash.

Aug 25, 2009 | Mitsubishi Lancer Cars & Trucks

1 Answer

I need instructions on how to install a tacho in a 2002 cg lancer


We had tacho installation problem with out 98 lancer with no tacho on the panel. we got a aftermarket one but when we had to wiring it up it needed a tacho signle from the ignition coil. The ignition coil is built into the distributor which made it hard. The 2002 is the same distributor setup as the 98 so you can get step by step instructions with diagrams and pictures from my page, you will see an link that says Mitsubishi Tacho installation. website is www.sureyya.biz let me know if you find it useful.

Goodluck

Aug 22, 2009 | 2002 Mitsubishi Lancer

2 Answers

2000 mitsubishi lancer gli coupe owners manual


ebay for one, any dealership can order you one and junk yard for 5 bucks. 2000-2006 will work, good luck hope that help

Jul 11, 2009 | Mitsubishi Lancer Cars & Trucks

1 Answer

99 lancer,speedo tacho n gauge problem.


probably burnt or cracked circuit board on back of gauge cluster

Jun 21, 2009 | 2002 Mitsubishi Lancer

2 Answers

Gauges all Dead


i think that u have a problem with RPM cause this problem is not always being with ur car.

Jun 06, 2009 | 2003 Mitsubishi Lancer

2 Answers

Instrument failure lancer 2001mitsubishi coupe


On my Bitsasushi Lancer CE 2000 i found a Hairline crack on Vinyl PCP about 6 o'clock when viewing Cluster right way up at rear where Vinyl circuit folds over under plastic Tabs, looks like power supply to Warning Lights, i just Spent 5 mins scraping Blue Vinyl to reveal Crack a Dab of Solder a Dollop of clear Laquer(Naily-Polish) inserted Cluster

Oct 26, 2008 | 2002 Mitsubishi Lancer

3 Answers

1997 CE Lancer speedometer


i had the same problem on my g/f's 2000 lancer GLXi, (with tacho),
i fixed the problem by putting a jump wire on the back of the instrument cluster,
the fault was in the wiring to the tacho part & i drew up my own wiring diagrams for the cluster unit,
then traced the fault,
looking @ the back of the cluster unit, the top right hand screw for the speedometer,,, follow the track on the circuit-board, there is a link wire UNDER the board (there is a dotted line on top where it goes, i think its the left 1,,, there is 2) this track then goes to the bottom left screw on the tacho,,,
i soldered a small gauge wire from the bottom of the link solder joint (MAKE SURE ITS THE CORRECT LINK, THERE IS 2 SIDE BY SIDE) to the bottom right track on the vertical plug socket (its common pos for the warning lights) this is where the "MIRAGE" & other "CE LANCER" (without tacho) gets its speedometer & gauges power from,

kind regards waz
if anyone needs a photo i will pull out the dash again lol its only 6 screws

Jul 17, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

460 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...