Question about 1996 Honda Accord

1 Answer

Right front wheel bearing going out - how do you fix it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 104 Answers

Remove the wheel. Remove the center nut holding the c.v. shaft to the spindle. Loosen the bolt holding the tie rod to the spindle and set the tie rod out of the way.You may need a hammer for this. Remove the bolt holding the strut to the spindle. Remove the bolts on the upper and lower control arms. Remove the spindle and have the old bearing pressed out and the new one pressed in. Installation is reverse of removal.

Posted on Oct 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dodge Grand Caravan is making a humming noise as you accelerate, while turning left it stops but gets worse while turning right. I replaced the left front wheel hub and no improvement, I need help


if hub bearing replacement did not fix the noise

when noises are on left and right turns
that has CV joints /drive shafts
would say they are the issue
replace both sides

and replace the left hand hub bearing at the same time


26319284-yxyoopazoqpslmdxp0iioobb-4-0.jpg

26319284-yxyoopazoqpslmdxp0iioobb-4-1.jpg

26319284-yxyoopazoqpslmdxp0iioobb-4-3.jpg

Oct 20, 2016 | Dodge Caravan Cars & Trucks

2 Answers

Right Front Wheel Bearing


sometimes knucke bearings have different sizes, like one side has 4.5, then the other side is 4.6. just make sure that the components are alligned well and if in case a rubber hammer is available, do use it, just apply more grease on the bearing hub, then try to use the rubber hammer to punch the bearing back. please refer to the picture below for the assembly4bb4e51.jpg

Aug 11, 2008 | 1992 Dodge Stealth

1 Answer

Is there a trick to installing the bearing front end KIA sportage


Fix It Right! - Front Hub Bearing Replacement - YouTube

? 14:26
https://www.youtube.com/watch?v=l0LCkycUcqM
Sep 7, 2011 - Uploaded by OneSourceAutomotive
Front Hub Bearing Replacement (S1E3) Demonstrated on a 2004Kia Sedona FWD. ... on a front-wheel ...

Kia Sportage wheel bearing replacement - YouTube

? 4:10
https://www.youtube.com/watch?v=wa6NREeozbE
Apr 3, 2014 - Uploaded by Jo Daddy's Garage
I did a quick replacement of a bad rear wheel bearing/hub on aKia ... How to install front struts on a Kia ...

Dec 09, 2015 | Kia Cars & Trucks

3 Answers

The car is making a roaring noise going down the road, if I turn the steering wheel to the left it stops, if I turn to the right it gets louder. Any ideas?


Good Morning. What this sounds like is the exact diagnosing of a front hub assembly really not that pricey either, and a common problem. Last one I did a few days ago even with the noise calming down going the other way ended up being both hubs. I hope this helps and if you have any questions please feel free to ask.
Thanks,
Joey

Sep 02, 2010 | 2003 Oldsmobile Alero

1 Answer

Noise coming from right front wheel....


IT COULD BE THE FRONT WHEEL BEARING, THEY USUALLY GO BAD BECAUSE ALL THE WEIGHT ON THE FRONT OF THE CAR

Jul 24, 2010 | 2001 Kia Sportage

3 Answers

I Think I have a front wheel bearing problem


Check wheel bering for play if there is no play , it doesn't mean that bearing is NOT bad its can still be dry and would be making that grinding sound you described Also check axle and see if boot is broken. That may be your problem also make sure that rotors are not gouged/scraped up and pads are good.Contact if you need more help and thanks for using FIX YA

May 05, 2009 | 2004 Kia Sedona

2 Answers

Wierd noise


Sounds like a wheel bearing going, or gone. Possible tire/alignment, but more than likely, wheel bearing. You going to fix, or have it fixed?

Apr 24, 2009 | 2004 Pontiac Grand Am

Not finding what you are looking for?
1996 Honda Accord Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...