Question about 2000 Chevrolet Monte Carlo
Follow the bottom pipe of the radiator to the engine block. the thermostat is close to that.
a good idea would be to flush your system (get a bottle radiotor flush from a motor spares shop and follow instructions. It makes sense since you are going to be draining the system anyways and clearly you have an overheating problem so you are killing two birds with one stone
make sure the engine is off and cooled down. Hot radiator fluid is higher than boiling point.
remove the cooling system cap to ensure there is no pressure in the system.
loosen the hose clamps of the above mentioned pipe. remove pipe, from engine block and radiator.
Look for bolts on and close to where the radiator hose connects. there should be two ir three.
Loosen and remove. gently remove the housing. Be careful when removing the old thermostat and new thermostats do not come with the rubber seal you see around the thermo.
Replace with identical thermo. when replacing the housing remember to apply gasket sealant. this takes 8 to 12 hours to harden / cure.
replace the radiator hose to be one the safe side. tighten clamps, fill up radiator with anti-freeze/summer coolant and water.
You should be up and running in a day or two
Posted on Oct 06, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 12, 2015 | Cars & Trucks
Sep 10, 2015 | Jeep Liberty Cars & Trucks
Oct 12, 2013 | 1998 Dodge Intrepid
Dec 01, 2012 | 1996 Pontiac Grand Am
Trace the upper radiator hose to the mounting area on the intake manifold. Loosen the hose clamp on the manifold end of the hose and remove the hose. Pull the thermostat out of the intake manifold.
For more help and troubleshooting go through the help links below:---
Click the link below:-----
THERMOSTAT REMOVAL PROCEDURE/LOCATION DETAILS
Where is Thermostat Located on
How to Replace a Thermostat.
Nov 28, 2012 | Buick Century Cars & Trucks
Sep 30, 2011 | 2004 Chevrolet Cavalier
Oct 11, 2010 | 1994 Pontiac Grand Am
Aug 16, 2010 | 1997 Isuzu Trooper
Jul 10, 2010 | 2003 Cadillac CTS
Dec 06, 2009 | 1998 Jeep Wrangler
231 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: